From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Luca Weiss <luca@z3ntu.xyz>, David Heidelberg <david@ixit.cz>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 1/4] dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges'
Date: Sun, 8 May 2022 15:59:29 +0200 [thread overview]
Message-ID: <20220508135932.132378-2-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20220508135932.132378-1-krzysztof.kozlowski@linaro.org>
'gpio-reserved-ranges' property is already used and supported by common pinctrl
bindings, so add it also here to fix warnings like:
qrb5165-rb5.dtb: gpio@c000: 'gpio-reserved-ranges' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/pinctrl/qcom,pmic-gpio.yaml | 53 +++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 7e74a87ccc39..69195660ee2a 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -78,6 +78,12 @@ properties:
minItems: 2
maxItems: 44
+ gpio-reserved-ranges:
+ minItems: 1
+ # maxItems as half of total number of GPIOs, as there has to be at
+ # least one usable GPIO between each reserved range.
+ maxItems: 22
+
'#gpio-cells':
const: 2
description:
@@ -107,6 +113,8 @@ allOf:
gpio-line-names:
minItems: 2
maxItems: 2
+ gpio-reserved-ranges:
+ maxItems: 1
- if:
properties:
@@ -124,6 +132,9 @@ allOf:
gpio-line-names:
minItems: 4
maxItems: 4
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 2
- if:
properties:
@@ -137,6 +148,9 @@ allOf:
gpio-line-names:
minItems: 6
maxItems: 6
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 3
- if:
properties:
@@ -150,6 +164,9 @@ allOf:
gpio-line-names:
minItems: 8
maxItems: 8
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 4
- if:
properties:
@@ -163,6 +180,9 @@ allOf:
gpio-line-names:
minItems: 9
maxItems: 9
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 5
- if:
properties:
@@ -182,6 +202,9 @@ allOf:
gpio-line-names:
minItems: 10
maxItems: 10
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 5
- if:
properties:
@@ -194,6 +217,9 @@ allOf:
gpio-line-names:
minItems: 11
maxItems: 11
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 6
- if:
properties:
@@ -212,6 +238,9 @@ allOf:
gpio-line-names:
minItems: 12
maxItems: 12
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 6
- if:
properties:
@@ -224,6 +253,9 @@ allOf:
gpio-line-names:
minItems: 13
maxItems: 13
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 7
- if:
properties:
@@ -236,6 +268,9 @@ allOf:
gpio-line-names:
minItems: 14
maxItems: 14
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 7
- if:
properties:
@@ -248,6 +283,9 @@ allOf:
gpio-line-names:
minItems: 16
maxItems: 16
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 8
- if:
properties:
@@ -261,6 +299,9 @@ allOf:
gpio-line-names:
minItems: 22
maxItems: 22
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 11
- if:
properties:
@@ -273,6 +314,9 @@ allOf:
gpio-line-names:
minItems: 26
maxItems: 26
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 13
- if:
properties:
@@ -285,6 +329,9 @@ allOf:
gpio-line-names:
minItems: 36
maxItems: 36
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 18
- if:
properties:
@@ -297,6 +344,9 @@ allOf:
gpio-line-names:
minItems: 38
maxItems: 38
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 19
- if:
properties:
@@ -310,6 +360,9 @@ allOf:
gpio-line-names:
minItems: 44
maxItems: 44
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 22
patternProperties:
'-state$':
--
2.32.0
next prev parent reply other threads:[~2022-05-08 13:59 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-08 13:59 [PATCH 0/4] dt-bindings/pinctrl/arm: qcom: second round of minor cleanups of QCOM PMIC pinctrl Krzysztof Kozlowski
2022-05-08 13:59 ` Krzysztof Kozlowski [this message]
2022-05-10 16:52 ` [PATCH 1/4] dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges' Rob Herring
2022-05-13 23:18 ` Linus Walleij
2022-05-14 19:42 ` Krzysztof Kozlowski
2022-05-16 15:11 ` Bjorn Andersson
2022-05-08 13:59 ` [PATCH 2/4] arm64: dts: qcom: add missing gpio-ranges in PMIC GPIOs Krzysztof Kozlowski
2022-05-08 13:59 ` [RFT 3/4] arm64: dts: qcom: correct interrupt controller on PM8916 and PMS405 Krzysztof Kozlowski
2022-05-08 13:59 ` [PATCH 4/4] ARM: dts: qcom: add missing gpio-ranges in PMIC GPIOs Krzysztof Kozlowski
2022-06-28 20:19 ` (subset) " Bjorn Andersson
2022-05-19 13:02 ` [PATCH 0/4] dt-bindings/pinctrl/arm: qcom: second round of minor cleanups of QCOM PMIC pinctrl Linus Walleij
2022-06-28 20:19 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220508135932.132378-2-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luca@z3ntu.xyz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).