From: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
To: <krzysztof.kozlowski+dt@linaro.org>,
<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<claudiu.beznea@microchip.com>, <peda@axentia.se>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <lee.jones@linaro.org>,
<linux@armlinux.org.uk>, <Manohar.Puri@microchip.com>,
<Kavyasree.Kotagiri@microchip.com>,
<UNGLinuxDriver@microchip.com>
Subject: [PATCH v2 1/4] dt-bindings: mfd: atmel,flexcom: Convert to json-schema
Date: Mon, 9 May 2022 14:19:17 +0530 [thread overview]
Message-ID: <20220509084920.14529-2-kavyasree.kotagiri@microchip.com> (raw)
In-Reply-To: <20220509084920.14529-1-kavyasree.kotagiri@microchip.com>
Convert the Atmel flexcom device tree bindings to json schema.
Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
---
.../bindings/mfd/atmel,flexcom.yaml | 92 +++++++++++++++++++
.../devicetree/bindings/mfd/atmel-flexcom.txt | 63 -------------
2 files changed, 92 insertions(+), 63 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
new file mode 100644
index 000000000000..79ec7ebc7055
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,flexcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
+
+maintainers:
+ - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description:
+ The Atmel Flexcom is just a wrapper which embeds a SPI controller,
+ an I2C controller and an USART. Only one function can be used at a
+ time and is chosen at boot time according to the device tree.
+
+properties:
+ compatible:
+ const: atmel,sama5d2-flexcom
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges:
+ description:
+ One range for the full I/O register region. (including USART,
+ TWI and SPI registers).
+ items:
+ maxItems: 3
+
+ atmel,flexcom-mode:
+ description: |
+ Specifies the flexcom mode as follows:
+ 1: USART
+ 2: SPI
+ 3: I2C.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 3]
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - atmel,flexcom-mode
+
+additionalProperties: false
+
+patternProperties:
+ "^serial@[0-9a-f]+$":
+ description: See atmel-usart.txt for details of USART bindings.
+ "^spi@[0-9a-f]+$":
+ description: See ../spi/spi_atmel.txt for details of SPI bindings.
+ "^i2c@[0-9a-f]+$":
+ description: See ../i2c/i2c-at91.txt for details of I2C bindings.
+
+examples:
+ - |
+ flx0: flexcom@f8034000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8034000 0x200>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8034000 0x800>;
+ atmel,flexcom-mode = <2>;
+
+ spi0: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <19 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&flx0_clk>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <32>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
deleted file mode 100644
index 692300117c64..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
-
-The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
-controller and an USART. Only one function can be used at a time and is chosen
-at boot time according to the device tree.
-
-Required properties:
-- compatible: Should be "atmel,sama5d2-flexcom"
-- reg: Should be the offset/length value for Flexcom dedicated
- I/O registers (without USART, TWI or SPI registers).
-- clocks: Should be the Flexcom peripheral clock from PMC.
-- #address-cells: Should be <1>
-- #size-cells: Should be <1>
-- ranges: Should be one range for the full I/O register region
- (including USART, TWI and SPI registers).
-- atmel,flexcom-mode: Should be one of the following values:
- - <1> for USART
- - <2> for SPI
- - <3> for I2C
-
-Required child:
-A single available child device of type matching the "atmel,flexcom-mode"
-property.
-
-The phandle provided by the clocks property of the child is the same as one for
-the Flexcom parent.
-
-For other properties, please refer to the documentations of the respective
-device:
-- ../serial/atmel-usart.txt
-- ../spi/spi_atmel.txt
-- ../i2c/i2c-at91.txt
-
-Example:
-
-flexcom@f8034000 {
- compatible = "atmel,sama5d2-flexcom";
- reg = <0xf8034000 0x200>;
- clocks = <&flx0_clk>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0xf8034000 0x800>;
- atmel,flexcom-mode = <2>;
-
- spi@400 {
- compatible = "atmel,at91rm9200-spi";
- reg = <0x400 0x200>;
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flx0_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&flx0_clk>;
- clock-names = "spi_clk";
- atmel,fifo-size = <32>;
-
- mtd_dataflash@0 {
- compatible = "atmel,at25f512b";
- reg = <0>;
- spi-max-frequency = <20000000>;
- };
- };
-};
--
2.17.1
next prev parent reply other threads:[~2022-05-09 8:57 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-09 8:49 [PATCH v2 0/4] Add support for lan966 flexcom multiplexer Kavyasree Kotagiri
2022-05-09 8:49 ` Kavyasree Kotagiri [this message]
2022-05-10 10:32 ` [PATCH v2 1/4] dt-bindings: mfd: atmel,flexcom: Convert to json-schema Krzysztof Kozlowski
2022-05-09 8:49 ` [PATCH v2 2/4] dt-bindings: mfd: atmel,flexcom: Add lan966 compatible string and mux properties Kavyasree Kotagiri
2022-05-10 10:33 ` Krzysztof Kozlowski
2022-05-09 8:49 ` [PATCH v2 3/4] dt-bindings: mux: Add lan966 flexcom mux controller Kavyasree Kotagiri
2022-05-10 10:37 ` Krzysztof Kozlowski
2022-05-09 8:49 ` [PATCH v2 4/4] mux: lan966: Add support for " Kavyasree Kotagiri
2022-05-09 11:37 ` Peter Rosin
2022-05-09 11:41 ` Peter Rosin
2022-05-10 14:59 ` Kavyasree.Kotagiri
2022-05-10 19:38 ` Peter Rosin
2022-05-11 14:28 ` Kavyasree.Kotagiri
2022-05-11 15:43 ` Peter Rosin
2022-05-27 6:00 ` Kavyasree.Kotagiri
2022-05-17 11:53 ` Michael Walle
2022-05-17 12:00 ` Peter Rosin
2022-05-10 1:46 ` kernel test robot
2022-05-10 3:28 ` kernel test robot
2022-05-11 9:06 ` Claudiu.Beznea
2022-05-23 14:52 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220509084920.14529-2-kavyasree.kotagiri@microchip.com \
--to=kavyasree.kotagiri@microchip.com \
--cc=Manohar.Puri@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=nicolas.ferre@microchip.com \
--cc=peda@axentia.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).