From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Peng Fan <peng.fan@nxp.com>,
Dong Aisheng <aisheng.dong@nxp.com>
Subject: [PATCH V5 3/4] arm64: dts: freescale: add i.MX93 11x11 EVK basic support
Date: Tue, 10 May 2022 17:39:45 +0800 [thread overview]
Message-ID: <20220510093946.335036-4-peng.fan@oss.nxp.com> (raw)
In-Reply-To: <20220510093946.335036-1-peng.fan@oss.nxp.com>
From: Peng Fan <peng.fan@nxp.com>
Enable lpuart & SDHC for console and rootfs
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx93-11x11-evk.dts | 130 ++++++++++++++++++
2 files changed, 131 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 238a83e5b8c6..c288bda8aa36 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
new file mode 100644
index 000000000000..86ae41a5bd76
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ */
+
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/ {
+ model = "NXP i.MX93 11X11 EVK board";
+ compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&mu1 {
+ status = "okay";
+};
+
+&mu2 {
+ status = "okay";
+};
+
+&lpuart1 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1>;
+ pinctrl-2 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ status = "okay";
+ no-sdio;
+ no-mmc;
+};
+
+&iomuxc {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
+ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX93_PAD_UART2_TXD__LPUART2_TX 0x31e
+ MX93_PAD_UART2_RXD__LPUART2_RX 0x31e
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
+ MX93_PAD_DAP_TDI__LPUART5_RX 0x31e
+ MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
+ MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x17fe
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17fe
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+};
--
2.25.1
next prev parent reply other threads:[~2022-05-10 9:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-10 9:39 [PATCH V5 0/4] arm64: add i.MX93 support Peng Fan (OSS)
2022-05-10 9:39 ` [PATCH V5 1/4] dt-bindings: arm: fsl: add imx93 11x11 evk board Peng Fan (OSS)
2022-05-10 9:39 ` [PATCH V5 2/4] arm64: dts: freescale: Add i.MX93 dtsi support Peng Fan (OSS)
2022-05-10 9:39 ` Peng Fan (OSS) [this message]
2022-05-10 11:31 ` [PATCH V5 3/4] arm64: dts: freescale: add i.MX93 11x11 EVK basic support Fabio Estevam
2022-05-10 9:39 ` [PATCH V5 4/4] arm64: defconfig: enable i.MX93 clk & pinctrl Peng Fan (OSS)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220510093946.335036-4-peng.fan@oss.nxp.com \
--to=peng.fan@oss.nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).