[PATCH 00/12] dt-bindings: remoteproc: qcom: cleanups and improvements

[PATCH 00/12] dt-bindings: remoteproc: qcom: cleanups and improvements

[Krzysztof Kozlowski]

Hi,

Patches are mostly independent, so they can go via:
1. Qualcomm SoC (dt-bindings/soc: + arm64)
2. remoteproc (dt-bindings).

Best regards,
Krzysztof

Krzysztof Kozlowski (12):
  dt-bindings: soc: qcom,wcnss: remove unneeded ref for names
  dt-bindings: remoteproc: remove unneeded ref for names
  dt-bindings: remoteproc: qcom,adsp: add interconnects
  dt-bindings: remoteproc: qcom,adsp: simplify interrupts
  dt-bindings: remoteproc: qcom,adsp: simplify SM8150 power domains
  dt-bindings: remoteproc: qcom,adsp: use GIC_SPI defines in example
  dt-bindings: remoteproc: qcom,glink-edge: define re-usable schema for
    glink-edge
  dt-bindings: remoteproc: qcom,smd-edge: define re-usable schema for
    smd-edge
  arm64: dts: qcom: ipq6018: add label to remoteproc node
  arm64: dts: qcom: sdm630: remove unneeded address/size cells in
    glink-edge
  arm64: dts: qcom: sm8350: remove duplicated glink-edge interrupt
  arm64: dts: qcom: sm8450: remove duplicated glink-edge interrupt

 .../bindings/remoteproc/qcom,adsp.yaml        | 74 ++++++----------
 .../bindings/remoteproc/qcom,glink-edge.yaml  | 72 +++++++++++++++
 .../remoteproc/qcom,qcs404-cdsp-pil.yaml      |  1 -
 .../remoteproc/qcom,sc7280-wpss-pil.yaml      | 21 ++---
 .../remoteproc/qcom,sdm845-adsp-pil.yaml      |  1 -
 .../bindings/remoteproc/qcom,smd-edge.yaml    | 88 +++++++++++++++++++
 .../bindings/soc/qcom/qcom,smd.yaml           | 53 +----------
 .../bindings/soc/qcom/qcom,wcnss.yaml         |  1 -
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |  1 +
 arch/arm64/boot/dts/qcom/sdm630.dtsi          |  2 -
 arch/arm64/boot/dts/qcom/sm8350.dtsi          |  1 -
 arch/arm64/boot/dts/qcom/sm8450.dtsi          |  1 -
 12 files changed, 196 insertions(+), 120 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml

-- 
2.32.0

[PATCH 01/12] dt-bindings: soc: qcom,wcnss: remove unneeded ref for names

[Krzysztof Kozlowski]

The core schema already sets a 'ref' for properties ending with 'names'.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
index d891ecfb2691..5320504bb5e0 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
@@ -77,7 +77,6 @@ properties:
           Should reference the tx-enable and tx-rings-empty SMEM states.
 
       qcom,smem-state-names:
-        $ref: /schemas/types.yaml#/definitions/string-array
         items:
           - const: tx-enable
           - const: tx-rings-empty
-- 
2.32.0

[PATCH 02/12] dt-bindings: remoteproc: remove unneeded ref for names

[Krzysztof Kozlowski]

The core schema already sets a 'ref' for properties ending with 'names'.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml    | 1 -
 .../devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml   | 1 -
 .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml   | 3 +--
 .../devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml   | 1 -
 4 files changed, 1 insertion(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 947f94548d0e..810ef9d2bcc1 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -116,7 +116,6 @@ properties:
       - description: Stop the modem
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
     description: The names of the state bits used for SMP2P output
     items:
       - const: stop
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
index 31413cfe10db..06f5f93f62a9 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
@@ -90,7 +90,6 @@ properties:
       - description: Stop the modem
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string
     description: The names of the state bits used for SMP2P output
     items:
       - const: stop
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index d99a729d2710..ade932468c38 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -76,7 +76,7 @@ properties:
       - const: pdc_sync
 
   memory-region:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
@@ -102,7 +102,6 @@ properties:
       - description: Stop the modem
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string
     description: The names of the state bits used for SMP2P output
     const: stop
 
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
index 1535bbbe25da..20df83a96ef3 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
@@ -90,7 +90,6 @@ properties:
       - description: Stop the modem
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string
     description: The names of the state bits used for SMP2P output
     items:
       - const: stop
-- 
2.32.0

[PATCH 03/12] dt-bindings: remoteproc: qcom,adsp: add interconnects

[Krzysztof Kozlowski]

SM8350 ADSP Peripheral Image Loader already defines interconnects, so
document the property:

  sm8350-hdk.dtb: remoteproc@4080000: 'interconnects' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 810ef9d2bcc1..6e1fdfe91043 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -67,6 +67,9 @@ properties:
     minItems: 1
     maxItems: 8
 
+  interconnects:
+    maxItems: 1
+
   interrupts:
     minItems: 5
     maxItems: 6
-- 
2.32.0

[PATCH 04/12] dt-bindings: remoteproc: qcom,adsp: simplify interrupts

[Krzysztof Kozlowski]

Interrupts between variants differ only with presence of last optional
interrupt, so the constraints can be simplified.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/remoteproc/qcom,adsp.yaml        | 46 ++++++++-----------
 1 file changed, 18 insertions(+), 28 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 6e1fdfe91043..0b2db36e5d14 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -72,11 +72,23 @@ properties:
 
   interrupts:
     minItems: 5
-    maxItems: 6
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
 
   interrupt-names:
     minItems: 5
-    maxItems: 6
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
 
   resets:
     minItems: 1
@@ -317,19 +329,9 @@ allOf:
     then:
       properties:
         interrupts:
-          items:
-            - description: Watchdog interrupt
-            - description: Fatal interrupt
-            - description: Ready interrupt
-            - description: Handover interrupt
-            - description: Stop acknowledge interrupt
+          maxItems: 5
         interrupt-names:
-          items:
-            - const: wdog
-            - const: fatal
-            - const: ready
-            - const: handover
-            - const: stop-ack
+          maxItems: 5
 
   - if:
       properties:
@@ -347,21 +349,9 @@ allOf:
     then:
       properties:
         interrupts:
-          items:
-            - description: Watchdog interrupt
-            - description: Fatal interrupt
-            - description: Ready interrupt
-            - description: Handover interrupt
-            - description: Stop acknowledge interrupt
-            - description: Shutdown acknowledge interrupt
+          minItems: 6
         interrupt-names:
-          items:
-            - const: wdog
-            - const: fatal
-            - const: ready
-            - const: handover
-            - const: stop-ack
-            - const: shutdown-ack
+          minItems: 6
 
   - if:
       properties:
-- 
2.32.0

[PATCH 05/12] dt-bindings: remoteproc: qcom,adsp: simplify SM8150 power domains

[Krzysztof Kozlowski]

The SM8150 if cases for power domains can be merged with another entry.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/remoteproc/qcom,adsp.yaml | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 0b2db36e5d14..e3a193299c4a 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -371,6 +371,8 @@ allOf:
               - qcom,msm8226-adsp-pil
               - qcom,msm8996-adsp-pil
               - qcom,msm8998-adsp-pas
+              - qcom,sm8150-adsp-pas
+              - qcom,sm8150-cdsp-pas
     then:
       properties:
         power-domains:
@@ -434,19 +436,6 @@ allOf:
             - const: cx
             - const: mx
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sm8150-adsp-pas
-              - qcom,sm8150-cdsp-pas
-    then:
-      properties:
-        power-domains:
-          items:
-            - description: CX power domain
-
   - if:
       properties:
         compatible:
-- 
2.32.0

[PATCH 06/12] dt-bindings: remoteproc: qcom,adsp: use GIC_SPI defines in example

[Krzysztof Kozlowski]

Use GIC_SPI defines instead of raw value in the DTS example.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index e3a193299c4a..d04de60ae017 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -575,11 +575,12 @@ allOf:
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     adsp {
         compatible = "qcom,msm8974-adsp-pil";
 
-        interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
                       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
                       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
                       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -601,7 +602,7 @@ examples:
         qcom,smem-state-names = "stop";
 
         smd-edge {
-            interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
+            interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 
             qcom,ipc = <&apcs 8 8>;
             qcom,smd-edge = <1>;
-- 
2.32.0

[PATCH 07/12] dt-bindings: remoteproc: qcom,glink-edge: define re-usable schema for glink-edge

[Krzysztof Kozlowski]

'glink-edge' property appears in multiple bindings, so split it into one
place which can be re-used.  This reduces code duplication and strict
schema matching for glink-edge nodes (instead of just "type:object").

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/remoteproc/qcom,adsp.yaml        |  2 +-
 .../bindings/remoteproc/qcom,glink-edge.yaml  | 72 +++++++++++++++++++
 .../remoteproc/qcom,sc7280-wpss-pil.yaml      | 18 ++---
 3 files changed, 77 insertions(+), 15 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index d04de60ae017..4dfbfece1ec7 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -154,7 +154,7 @@ properties:
       channels and devices related to the ADSP.
 
   glink-edge:
-    type: object
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
     description:
       Qualcomm G-Link subnode which represents communication edge, channels
       and devices related to the ADSP.
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
new file mode 100644
index 000000000000..fa69f7b21eed
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,glink-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm G-Link Edge communication channel nodes
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm G-Link subnode represents communication edge, channels and devices
+  related to the remote processor.
+
+properties:
+  $nodename:
+    const: "glink-edge"
+
+  apr:
+    $ref: /schemas/soc/qcom/qcom,apr.yaml#
+    description:
+      Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
+
+  fastrpc:
+    type: object
+    description:
+      See Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
+
+  interrupts:
+    maxItems: 1
+
+  label:
+    description: The names of the state bits used for SMP2P output
+
+  mboxes:
+    maxItems: 1
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      ID of the shared memory used by GLINK for communication with remote
+      processor.
+
+required:
+  - interrupts
+  - label
+  - mboxes
+  - qcom,remote-pid
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc@8a00000 {
+        reg = <0x08a00000 0x10000>;
+        // ...
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_WPSS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "wpss";
+            qcom,remote-pid = <13>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index ade932468c38..3f06d66cbe47 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -106,8 +106,8 @@ properties:
     const: stop
 
   glink-edge:
-    type: object
-    description: |
+    $ref: qcom,glink-edge.yaml#
+    description:
       Qualcomm G-Link subnode which represents communication edge, channels
       and devices related to the ADSP.
 
@@ -121,21 +121,11 @@ properties:
           - description: Mailbox for communication between APPS and WPSS
 
       label:
-        description: The names of the state bits used for SMP2P output
         items:
           - const: wpss
 
-      qcom,remote-pid:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: ID of the shared memory used by GLINK for communication with WPSS
-
-    required:
-      - interrupts
-      - mboxes
-      - label
-      - qcom,remote-pid
-
-    additionalProperties: false
+      apr: false
+      fastrpc: false
 
 required:
   - compatible
-- 
2.32.0

[PATCH 08/12] dt-bindings: remoteproc: qcom,smd-edge: define re-usable schema for smd-edge

[Krzysztof Kozlowski]

'smd-edge' property appears in multiple bindings, so split it into one
place which can be re-used.  This reduces code duplication and strict
schema matching for smd-edge nodes (instead of just "type:object").

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/remoteproc/qcom,adsp.yaml        |  2 +-
 .../bindings/remoteproc/qcom,smd-edge.yaml    | 88 +++++++++++++++++++
 .../bindings/soc/qcom/qcom,smd.yaml           | 53 +----------
 3 files changed, 91 insertions(+), 52 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 4dfbfece1ec7..3072af5f9d79 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -148,7 +148,7 @@ properties:
       three offsets within syscon for q6, modem and nc halt registers.
 
   smd-edge:
-    type: object
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
     description:
       Qualcomm Shared Memory subnode which represents communication edge,
       channels and devices related to the ADSP.
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
new file mode 100644
index 000000000000..fde2c450e8b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,smd-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SMD Edge communication channel nodes
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm SMD subnode represents a remote subsystem or a remote processor of
+  some sort - or in SMD language an "edge". The name of the edges are not
+  important.
+
+
+  See also Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
+
+properties:
+  $nodename:
+    const: "smd-edge"
+
+  interrupts:
+    maxItems: 1
+
+  label:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Name of the edge, used for debugging and identification purposes. The
+      node name will be used if this is not present.
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client.
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the
+      remote processor.
+
+  qcom,smd-edge:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the remote processor in the smd channel allocation
+      table.
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier for the remote processor as known by the rest of the
+      system.
+
+required:
+  - interrupts
+  - qcom,smd-edge
+
+oneOf:
+  - required:
+      - mboxes
+  - required:
+      - qcom,ipc
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc {
+        // ...
+
+        smd-edge {
+            interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,ipc = <&apcs 8 8>;
+            qcom,smd-edge = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
index e6f9ffa1c0ea..a609c3425816 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
@@ -21,51 +21,12 @@ properties:
 
 patternProperties:
   "^.*-edge|rpm$":
-    type: object
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
     description:
       Each subnode of the SMD node represents a remote subsystem or a remote
       processor of some sort - or in SMD language an "edge". The name of the
       edges are not important.
 
-    properties:
-      interrupts:
-        maxItems: 1
-
-      label:
-        $ref: /schemas/types.yaml#/definitions/string
-        description:
-          Name of the edge, used for debugging and identification purposes. The
-          node name will be used if this is not present.
-
-      mboxes:
-        maxItems: 1
-        description:
-          Reference to the mailbox representing the outgoing doorbell in APCS for
-          this client.
-
-      qcom,ipc:
-        $ref: /schemas/types.yaml#/definitions/phandle-array
-        items:
-          - items:
-              - description: phandle to a syscon node representing the APCS registers
-              - description: u32 representing offset to the register within the syscon
-              - description: u32 representing the ipc bit within the register
-        description:
-          Three entries specifying the outgoing ipc bit used for signaling the
-          remote processor.
-
-      qcom,smd-edge:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description:
-          The identifier of the remote processor in the smd channel allocation
-          table.
-
-      qcom,remote-pid:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description:
-          The identifier for the remote processor as known by the rest of the
-          system.
-
     # Binding for edge subnodes is not complete
     patternProperties:
       "^rpm-requests$":
@@ -91,17 +52,7 @@ patternProperties:
 
         additionalProperties: true
 
-    required:
-      - interrupts
-      - qcom,smd-edge
-
-    oneOf:
-      - required:
-          - mboxes
-      - required:
-          - qcom,ipc
-
-    additionalProperties: false
+    unevaluatedProperties: false
 
 required:
   - compatible
-- 
2.32.0

[PATCH 09/12] arm64: dts: qcom: ipq6018: add label to remoteproc node

[Krzysztof Kozlowski]

glink-edge bindings require label:

  ipq6018-cp01-c1.dtb: glink-edge: 'label' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index c89499e366d3..9db30e7da7bd 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -621,6 +621,7 @@ q6v5_wcss: remoteproc@cd00000 {
 
 			glink-edge {
 				interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
+				label = "rtr";
 				qcom,remote-pid = <1>;
 				mboxes = <&apcs_glb 8>;
 
-- 
2.32.0

[PATCH 10/12] arm64: dts: qcom: sdm630: remove unneeded address/size cells in glink-edge

[Krzysztof Kozlowski]

glink-edge node does not have children with unit addresses:

  sdm630-sony-xperia-ganges-kirin.dtb: glink-edge: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index b72e8e6c52f3..8e32eb3ed599 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -2158,8 +2158,6 @@ glink-edge {
 				label = "lpass";
 				mboxes = <&apcs_glb 9>;
 				qcom,remote-pid = <2>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 
 				apr {
 					compatible = "qcom,apr-v2";
-- 
2.32.0

[PATCH 11/12] arm64: dts: qcom: sm8350: remove duplicated glink-edge interrupt

[Krzysztof Kozlowski]

Specifying interrupts and interrupts-extended is not correct.  Keep only
the extended ones, routed towards IPCC mailbox to fix warnings like:

  sm8350-sony-xperia-sagami-pdx214.dtb: glink-edge: More than one condition true in oneOf schema:
    {'$filename': 'Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml',

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 743cba9b683c..e8c341faa8df 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1677,7 +1677,6 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 							     IRQ_TYPE_EDGE_RISING>;
 				mboxes = <&ipcc IPCC_CLIENT_MPSS
 						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
 				label = "modem";
 				qcom,remote-pid = <1>;
 			};
-- 
2.32.0

[PATCH 12/12] arm64: dts: qcom: sm8450: remove duplicated glink-edge interrupt

[Krzysztof Kozlowski]

Specifying interrupts and interrupts-extended is not correct.  Keep only
the extended ones, routed towards IPCC mailbox to fix warnings like:

  sm8450-qrd.dtb: glink-edge: More than one condition true in oneOf schema:
    {'$filename': 'Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml',

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 7d08fad76371..4e796f27d6fc 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2282,7 +2282,6 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 							     IRQ_TYPE_EDGE_RISING>;
 				mboxes = <&ipcc IPCC_CLIENT_MPSS
 						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
 				label = "modem";
 				qcom,remote-pid = <1>;
 			};
-- 
2.32.0

Re: [PATCH 06/12] dt-bindings: remoteproc: qcom,adsp: use GIC_SPI defines in example

[Rob Herring]

On Thu, 12 May 2022 12:00:00 +0200, Krzysztof Kozlowski wrote:
> Use GIC_SPI defines instead of raw value in the DTS example.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


remoteproc@b00000: qcom,halt-regs:0: [28, 102404] is too short
	arch/arm64/boot/dts/qcom/qcs404-evb-1000.dtb
	arch/arm64/boot/dts/qcom/qcs404-evb-4000.dtb

Re: [PATCH 01/12] dt-bindings: soc: qcom,wcnss: remove unneeded ref for names

[Rob Herring]

On Thu, 12 May 2022 11:59:55 +0200, Krzysztof Kozlowski wrote:
> The core schema already sets a 'ref' for properties ending with 'names'.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml | 1 -
>  1 file changed, 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 02/12] dt-bindings: remoteproc: remove unneeded ref for names

[Rob Herring]

On Thu, 12 May 2022 11:59:56 +0200, Krzysztof Kozlowski wrote:
> The core schema already sets a 'ref' for properties ending with 'names'.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml    | 1 -
>  .../devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml   | 1 -
>  .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml   | 3 +--
>  .../devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml   | 1 -
>  4 files changed, 1 insertion(+), 5 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 05/12] dt-bindings: remoteproc: qcom,adsp: simplify SM8150 power domains

[Rob Herring]

On Thu, 12 May 2022 11:59:59 +0200, Krzysztof Kozlowski wrote:
> The SM8150 if cases for power domains can be merged with another entry.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/remoteproc/qcom,adsp.yaml | 15 ++-------------
>  1 file changed, 2 insertions(+), 13 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 07/12] dt-bindings: remoteproc: qcom,glink-edge: define re-usable schema for glink-edge

[Rob Herring]

On Thu, 12 May 2022 12:00:01 +0200, Krzysztof Kozlowski wrote:
> 'glink-edge' property appears in multiple bindings, so split it into one
> place which can be re-used.  This reduces code duplication and strict
> schema matching for glink-edge nodes (instead of just "type:object").
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/remoteproc/qcom,adsp.yaml        |  2 +-
>  .../bindings/remoteproc/qcom,glink-edge.yaml  | 72 +++++++++++++++++++
>  .../remoteproc/qcom,sc7280-wpss-pil.yaml      | 18 ++---
>  3 files changed, 77 insertions(+), 15 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH 08/12] dt-bindings: remoteproc: qcom,smd-edge: define re-usable schema for smd-edge

[Rob Herring]

On Thu, May 12, 2022 at 12:00:02PM +0200, Krzysztof Kozlowski wrote:
> 'smd-edge' property appears in multiple bindings, so split it into one
> place which can be re-used.  This reduces code duplication and strict
> schema matching for smd-edge nodes (instead of just "type:object").
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/remoteproc/qcom,adsp.yaml        |  2 +-
>  .../bindings/remoteproc/qcom,smd-edge.yaml    | 88 +++++++++++++++++++
>  .../bindings/soc/qcom/qcom,smd.yaml           | 53 +----------
>  3 files changed, 91 insertions(+), 52 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> index 4dfbfece1ec7..3072af5f9d79 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> @@ -148,7 +148,7 @@ properties:
>        three offsets within syscon for q6, modem and nc halt registers.
>  
>    smd-edge:
> -    type: object
> +    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
>      description:
>        Qualcomm Shared Memory subnode which represents communication edge,
>        channels and devices related to the ADSP.
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> new file mode 100644
> index 000000000000..fde2c450e8b5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,smd-edge.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SMD Edge communication channel nodes
> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description:
> +  Qualcomm SMD subnode represents a remote subsystem or a remote processor of
> +  some sort - or in SMD language an "edge". The name of the edges are not
> +  important.
> +
> +
> +  See also Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
> +
> +properties:
> +  $nodename:
> +    const: "smd-edge"
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  label:
> +    $ref: /schemas/types.yaml#/definitions/string

Don't need a type here. Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>