From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7B9D4C433EF for ; Thu, 12 May 2022 12:49:44 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1354001AbiELMtm (ORCPT ); Thu, 12 May 2022 08:49:42 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38838 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1353992AbiELMtb (ORCPT ); Thu, 12 May 2022 08:49:31 -0400 Received: from mail-ed1-x52c.google.com (mail-ed1-x52c.google.com [IPv6:2a00:1450:4864:20::52c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4DE4724EA01 for ; Thu, 12 May 2022 05:49:26 -0700 (PDT) Received: by mail-ed1-x52c.google.com with SMTP id p4so6177485edx.0 for ; Thu, 12 May 2022 05:49:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sartura-hr.20210112.gappssmtp.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=vfLuO2bBXhL8oa/UMAFdd0jhsQRQifT6C/f2wEkgFLI=; b=L43YhiT2wsBXxUHAxiZR9VWAQvCAeHpaUgjMTb6U5Db8tgM2a38PNFVnS70l4s3DAy R3EkQ0J3DJluXGw9ruQioOZMC/+OJDwGpBhvp7KgOSzVAhhxgZAoYr6et6ubMyeqAGQ/ CGc2XDtFYLChCj+GtxOQhWyNVN6yO3NDr8iNekfPJfehYE4Jl01+foZkXPtrtVJzSuvE IZbW0vySmy+WFpvGZnJc2EJ3CDRi0O7rVWI0lu4NoQ4ZLw80LGkwAMGB30L3gCfGMhE6 4mGpu6rtZTyu1bE9gVu4TbFrTp4TUn6HaCyadxPSdkFJg4EgdtYjk9bdE+38UvTGd+4u H4gg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=vfLuO2bBXhL8oa/UMAFdd0jhsQRQifT6C/f2wEkgFLI=; b=5KpVgp5GpktGCRDTTI/k58wAu8/oDG5XZfDxRRklbTMoYiOnYS+heRiJ98tNpbAguF cE5NCwC62yztZZRyswqqZY2ZAx0tzUAe09nxMvbHejUmfjJFaydSJlNIQxfKCTfu+AaU YD9CYDIA5sWDno7XgN1bsDmY3jNh3DbULASKwcdvzN+85LABSZb3BRT8xVmVN3Sfyql7 dWwZpjieOpxgIlRWHumcpX7bTkMSKCj1ZMKuyFmvP8vQJBpARN7iXXjgcr0pgQvC9uo9 Ri49D3UJQWSt/ceXHugukSrVVGNuRXRW7yFfc0O52h4Cf9MMweWus7WoIvkbtvHBsRZ+ Xb8Q== X-Gm-Message-State: AOAM5310eSu+d+zbJB6S+gYi8c5udqZgd/SBn0ak11NGsJca/Cne20R7 TmZ1m6tlK4Kb8Dcxqp6rq+0AKcUtHB0267C+ X-Google-Smtp-Source: ABdhPJwHuUuqTGyN20MxxMY43Cid9m9kP329LRVhLvlYj8nAMgSSRHntaU8KjZcz1GDv3NO02jwM9Q== X-Received: by 2002:a05:6402:3456:b0:425:ab60:1b00 with SMTP id l22-20020a056402345600b00425ab601b00mr35301778edc.71.1652359764826; Thu, 12 May 2022 05:49:24 -0700 (PDT) Received: from fedora.robimarko.hr (dh207-98-58.xnet.hr. [88.207.98.58]) by smtp.googlemail.com with ESMTPSA id h3-20020a170906828300b006f3ef214dc2sm2109475ejx.40.2022.05.12.05.49.23 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 12 May 2022 05:49:24 -0700 (PDT) From: Robert Marko To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, andrew@lunn.ch, gregory.clement@bootlin.com, sebastian.hesselbarth@gmail.com, kostap@marvell.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Robert Marko Subject: [PATCH v3 09/11] arm64: dts: marvell: split Methode uDPU DTS Date: Thu, 12 May 2022 14:49:03 +0200 Message-Id: <20220512124905.49979-9-robert.marko@sartura.hr> X-Mailer: git-send-email 2.36.1 In-Reply-To: <20220512124905.49979-1-robert.marko@sartura.hr> References: <20220512124905.49979-1-robert.marko@sartura.hr> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Split the Methode uDPU DTS into a common DTSI as preparation for adding support for Methode eDPU which is based on the uDPU to avoid duplication. Signed-off-by: Robert Marko --- .../boot/dts/marvell/armada-3720-uDPU.dts | 150 +--------------- .../boot/dts/marvell/armada-3720-uDPU.dtsi | 160 ++++++++++++++++++ 2 files changed, 161 insertions(+), 149 deletions(-) create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index f21a855fc608..a75734d88a4f 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -1,66 +1,13 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device tree for the uDPU board. - * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) - * Copyright (C) 2016 Marvell - * Copyright (C) 2019 Methode Electronics - * Copyright (C) 2019 Telus - * - * Vladimir Vid - */ /dts-v1/; -#include -#include "armada-372x.dtsi" +#include "armada-3720-uDPU.dtsi" / { model = "Methode uDPU Board"; compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710"; - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - leds { - compatible = "gpio-leds"; - - led-power1 { - label = "udpu:green:power"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - - led-power2 { - label = "udpu:red:power"; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - - led-network1 { - label = "udpu:green:network"; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - }; - - led-network2 { - label = "udpu:red:network"; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - - led-alarm1 { - label = "udpu:green:alarm"; - gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; - }; - - led-alarm2 { - label = "udpu:red:alarm"; - gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; - }; - }; - sfp_eth0: sfp-eth0 { compatible = "sff,sfp"; i2c-bus = <&i2c0>; @@ -70,55 +17,6 @@ sfp_eth0: sfp-eth0 { tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; - - sfp_eth1: sfp-eth1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <3000>; - }; -}; - -&sdhci0 { - status = "okay"; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,pad-type = "fixed-1-8v"; - non-removable; - no-sd; - no-sdio; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <54000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "firmware"; - reg = <0x0 0x180000>; - }; - - partition@180000 { - label = "u-boot-env"; - reg = <0x180000 0x10000>; - }; - }; - }; }; &pinctrl_nb { @@ -126,11 +24,6 @@ i2c1_recovery_pins: i2c1-recovery-pins { groups = "i2c1"; function = "gpio"; }; - - i2c2_recovery_pins: i2c2-recovery-pins { - groups = "i2c2"; - function = "gpio"; - }; }; &i2c0 { @@ -143,48 +36,7 @@ &i2c0 { sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; -&i2c1 { - status = "okay"; - pinctrl-names = "default", "recovery"; - pinctrl-0 = <&i2c2_pins>; - pinctrl-1 = <&i2c2_recovery_pins>; - /delete-property/mrvl,i2c-fast-mode; - scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - temp-sensor@48 { - compatible = "ti,tmp75c"; - reg = <0x48>; - }; - - temp-sensor@49 { - compatible = "ti,tmp75c"; - reg = <0x49>; - }; -}; - ð0 { phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy1 0>; sfp = <&sfp_eth0>; }; - -ð1 { - phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy0 1>; - sfp = <&sfp_eth1>; -}; - -&usb3 { - status = "okay"; - phys = <&usb2_utmi_otg_phy>; - phy-names = "usb2-utmi-otg-phy"; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi new file mode 100644 index 000000000000..3f79923376fb --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree for the uDPU board. + * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * Copyright (C) 2019 Methode Electronics + * Copyright (C) 2019 Telus + * + * Vladimir Vid + */ + +/dts-v1/; + +#include +#include "armada-372x.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power1 { + label = "udpu:green:power"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + led-power2 { + label = "udpu:red:power"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + led-network1 { + label = "udpu:green:network"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + + led-network2 { + label = "udpu:red:network"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + led-alarm1 { + label = "udpu:green:alarm"; + gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; + }; + + led-alarm2 { + label = "udpu:red:alarm"; + gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; + }; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; +}; + +&sdhci0 { + status = "okay"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + non-removable; + no-sd; + no-sdio; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x180000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; + }; + }; + }; +}; + +&pinctrl_nb { + i2c2_recovery_pins: i2c2-recovery-pins { + groups = "i2c2"; + function = "gpio"; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-1 = <&i2c2_recovery_pins>; + /delete-property/mrvl,i2c-fast-mode; + scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + temp-sensor@48 { + compatible = "ti,tmp75c"; + reg = <0x48>; + }; + + temp-sensor@49 { + compatible = "ti,tmp75c"; + reg = <0x49>; + }; +}; + +ð0 { + status = "okay"; + managed = "in-band-status"; + phys = <&comphy1 0>; +}; + +ð1 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy0 1>; + sfp = <&sfp_eth1>; +}; + +&usb3 { + status = "okay"; + phys = <&usb2_utmi_otg_phy>; + phy-names = "usb2-utmi-otg-phy"; +}; + +&uart0 { + status = "okay"; +}; -- 2.36.1