From: Markuss Broks <markuss.broks@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org,
Markuss Broks <markuss.broks@gmail.com>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Marijn Suijten <marijn.suijten@somainline.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@somainline.org>,
Song Qiang <songqiang1304521@gmail.com>,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org
Subject: [PATCH v4 5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support
Date: Thu, 12 May 2022 22:13:33 +0300 [thread overview]
Message-ID: <20220512191334.61804-6-markuss.broks@gmail.com> (raw)
In-Reply-To: <20220512191334.61804-1-markuss.broks@gmail.com>
This patch adds device tree support for the VL53L0X ToF sensor
found on all Yoshino devices.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 47488a1aecae..4bd1039d983d 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -245,6 +245,24 @@ &blsp2_uart1 {
status = "okay";
};
+&blsp2_i2c2 {
+ status = "okay";
+
+ proximity@29 {
+ compatible = "st,vl53l0x";
+ reg = <0x29>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&cam_vio_vreg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tof_int &tof_reset>;
+ };
+};
+
&ibb {
regulator-min-microamp = <800000>;
regulator-max-microamp = <800000>;
@@ -606,6 +624,14 @@ cam0_vdig_default: cam0-vdig-default {
drive-strength = <2>;
};
+ tof_int: tof-int {
+ pins = "gpio22";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ };
+
cam1_vdig_default: cam1-vdig-default {
pins = "gpio25";
function = "gpio";
@@ -613,6 +639,13 @@ cam1_vdig_default: cam1-vdig-default {
drive-strength = <2>;
};
+ tof_reset: tof-reset {
+ pins = "gpio27";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
hall_sensor0_default: acc-cover-open {
pins = "gpio124";
function = "gpio";
--
2.36.1
prev parent reply other threads:[~2022-05-12 19:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-12 19:13 [PATCH v4 0/5] Add support for ToF sensor on Yoshino platform Markuss Broks
2022-05-12 19:13 ` [PATCH v4 1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties Markuss Broks
2022-05-13 8:56 ` Krzysztof Kozlowski
2022-05-14 14:29 ` Jonathan Cameron
2022-05-14 16:33 ` Markuss Broks
2022-05-12 19:13 ` [PATCH v4 2/5] proximity: vl53l0x: Prefer pre-initialized interrupt flags Markuss Broks
2022-05-12 19:13 ` [PATCH v4 3/5] proximity: vl53l0x: Handle the VDD regulator Markuss Broks
2022-05-12 19:13 ` [PATCH v4 4/5] proximity: vl53l0x: Handle the reset GPIO Markuss Broks
2022-05-12 19:13 ` Markuss Broks [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220512191334.61804-6-markuss.broks@gmail.com \
--to=markuss.broks@gmail.com \
--cc=agross@kernel.org \
--cc=angelogioacchino.delregno@somainline.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=songqiang1304521@gmail.com \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).