From: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
To: <robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
<jk@codeconstruct.com.au>, <a.kartashev@yadro.com>,
<patrick.rudolph@9elements.com>, <dphadke@linux.microsoft.com>,
<linux-aspeed@lists.ozlabs.org>, <openbmc@lists.ozlabs.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <ryan_chen@aspeedtech.com>
Subject: [PATCH v5 0/4] arm: aspeed: Add eSPI support
Date: Mon, 16 May 2022 08:54:08 +0800 [thread overview]
Message-ID: <20220516005412.4844-1-chiawei_wang@aspeedtech.com> (raw)
This patch series add the driver support for the eSPI controller of Aspeed 5/6th generation SoCs. This controller is a slave device communicating with a master over Enhanced Serial Peripheral Interface (eSPI).
It supports all of the 4 eSPI channels, namely peripheral, virtual wire, out-of-band, and flash, and operates at max frequency of 66MHz.
v5:
- unconditionally set VW GPIO to software mode as suggested by Jeremy
- add missing DTS node for Aspeed G5 SoCs
v4:
- fix dt-bindgins error with patternProperties
- fix data type warning for ARM64 compilation
- replace header based implementation with .c files
- add more description for the ioctl interface
v3:
- remove the redundant patch "clk: aspeed: Add eSPI reset bit"
- fix missing header inclusion reported by test bot
- fix dt-bindings error reported by yamllint
v2:
- remove irqchip implementation
- merge per-channel drivers into single one to avoid the racing issue
among eSPI handshake process and driver probing.
Chia-Wei Wang (4):
dt-bindings: aspeed: Add eSPI controller
MAINTAINER: Add ASPEED eSPI driver entry
soc: aspeed: Add eSPI driver
ARM: dts: aspeed: Add eSPI node
.../devicetree/bindings/soc/aspeed/espi.yaml | 162 +++++
MAINTAINERS | 9 +
arch/arm/boot/dts/aspeed-g5.dtsi | 17 +
arch/arm/boot/dts/aspeed-g6.dtsi | 17 +
drivers/soc/aspeed/Kconfig | 11 +
drivers/soc/aspeed/Makefile | 5 +
drivers/soc/aspeed/aspeed-espi-ctrl.c | 214 +++++++
drivers/soc/aspeed/aspeed-espi-ctrl.h | 309 ++++++++++
drivers/soc/aspeed/aspeed-espi-flash.c | 352 +++++++++++
drivers/soc/aspeed/aspeed-espi-flash.h | 45 ++
drivers/soc/aspeed/aspeed-espi-ioc.h | 195 ++++++
drivers/soc/aspeed/aspeed-espi-oob.c | 558 ++++++++++++++++++
drivers/soc/aspeed/aspeed-espi-oob.h | 70 +++
drivers/soc/aspeed/aspeed-espi-perif.c | 511 ++++++++++++++++
drivers/soc/aspeed/aspeed-espi-perif.h | 45 ++
drivers/soc/aspeed/aspeed-espi-vw.c | 142 +++++
drivers/soc/aspeed/aspeed-espi-vw.h | 21 +
17 files changed, 2683 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/aspeed/espi.yaml
create mode 100644 drivers/soc/aspeed/aspeed-espi-ctrl.c
create mode 100644 drivers/soc/aspeed/aspeed-espi-ctrl.h
create mode 100644 drivers/soc/aspeed/aspeed-espi-flash.c
create mode 100644 drivers/soc/aspeed/aspeed-espi-flash.h
create mode 100644 drivers/soc/aspeed/aspeed-espi-ioc.h
create mode 100644 drivers/soc/aspeed/aspeed-espi-oob.c
create mode 100644 drivers/soc/aspeed/aspeed-espi-oob.h
create mode 100644 drivers/soc/aspeed/aspeed-espi-perif.c
create mode 100644 drivers/soc/aspeed/aspeed-espi-perif.h
create mode 100644 drivers/soc/aspeed/aspeed-espi-vw.c
create mode 100644 drivers/soc/aspeed/aspeed-espi-vw.h
--
2.25.1
next reply other threads:[~2022-05-16 0:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-16 0:54 Chia-Wei Wang [this message]
2022-05-16 0:54 ` [PATCH v5 1/4] dt-bindings: aspeed: Add eSPI controller Chia-Wei Wang
2022-05-17 18:31 ` Rob Herring
2022-05-18 0:15 ` ChiaWei Wang
2022-05-18 18:26 ` Rob Herring
2022-05-19 3:10 ` ChiaWei Wang
2022-05-18 6:18 ` Patrick Rudolph
2022-05-16 0:54 ` [PATCH v5 2/4] MAINTAINER: Add ASPEED eSPI driver entry Chia-Wei Wang
2022-05-16 0:54 ` [PATCH v5 3/4] soc: aspeed: Add eSPI driver Chia-Wei Wang
2022-05-18 19:12 ` Christophe JAILLET
2022-05-19 3:42 ` ChiaWei Wang
2022-05-16 0:54 ` [PATCH v5 4/4] ARM: dts: aspeed: Add eSPI node Chia-Wei Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220516005412.4844-1-chiawei_wang@aspeedtech.com \
--to=chiawei_wang@aspeedtech.com \
--cc=a.kartashev@yadro.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=dphadke@linux.microsoft.com \
--cc=jk@codeconstruct.com.au \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=patrick.rudolph@9elements.com \
--cc=robh+dt@kernel.org \
--cc=ryan_chen@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).