From: Pankaj Raghav <p.raghav@samsung.com>
To: axboe@kernel.dk, damien.lemoal@opensource.wdc.com,
pankydev8@gmail.com, dsterba@suse.com, hch@lst.de
Cc: linux-nvme@lists.infradead.org, linux-fsdevel@vger.kernel.org,
linux-btrfs@vger.kernel.org, jiangbo.365@bytedance.com,
linux-block@vger.kernel.org, gost.dev@samsung.com,
p.raghav@samsung.com, linux-kernel@vger.kernel.org,
dm-devel@redhat.com, Luis Chamberlain <mcgrof@kernel.org>
Subject: [PATCH v4 02/13] block: allow blk-zoned devices to have non-power-of-2 zone size
Date: Mon, 16 May 2022 18:54:05 +0200 [thread overview]
Message-ID: <20220516165416.171196-3-p.raghav@samsung.com> (raw)
In-Reply-To: <20220516165416.171196-1-p.raghav@samsung.com>
Checking if a given sector is aligned to a zone is a common
operation that is performed for zoned devices. Add
blk_queue_is_zone_start helper to check for this instead of opencoding it
everywhere.
Convert the calculations on zone size to be generic instead of relying on
power_of_2 based logic in the block layer using the helpers wherever
possible.
The only hot path affected by this change for power_of_2 zoned devices
is in blk_check_zone_append() but blk_queue_is_zone_start() helper is
used to optimize the calculation for po2 zone sizes. Note that the append
path cannot be accessed by direct raw access to the block device but only
through a filesystem abstraction.
Finally, allow non power of 2 zoned devices provided that their zone
capacity and zone size are equal. The main motivation to allow non
power_of_2 zoned device is to remove the unmapped LBA between zcap and
zsze for devices that cannot have a power_of_2 zcap.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
---
block/blk-core.c | 3 +--
block/blk-zoned.c | 27 +++++++++++++++++++++------
include/linux/blkdev.h | 22 ++++++++++++++++++++++
3 files changed, 44 insertions(+), 8 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index f305cb66c..b7051b7ea 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -634,8 +634,7 @@ static inline blk_status_t blk_check_zone_append(struct request_queue *q,
return BLK_STS_NOTSUPP;
/* The bio sector must point to the start of a sequential zone */
- if (pos & (blk_queue_zone_sectors(q) - 1) ||
- !blk_queue_zone_is_seq(q, pos))
+ if (!blk_queue_is_zone_start(q, pos) || !blk_queue_zone_is_seq(q, pos))
return BLK_STS_IOERR;
/*
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 140230134..cfc2fb804 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -289,10 +289,10 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
return -EINVAL;
/* Check alignment (handle eventual smaller last zone) */
- if (sector & (zone_sectors - 1))
+ if (!blk_queue_is_zone_start(q, sector))
return -EINVAL;
- if ((nr_sectors & (zone_sectors - 1)) && end_sector != capacity)
+ if (!blk_queue_is_zone_start(q, nr_sectors) && end_sector != capacity)
return -EINVAL;
/*
@@ -490,14 +490,29 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
* smaller last zone.
*/
if (zone->start == 0) {
- if (zone->len == 0 || !is_power_of_2(zone->len)) {
- pr_warn("%s: Invalid zoned device with non power of two zone size (%llu)\n",
- disk->disk_name, zone->len);
+ if (zone->len == 0) {
+ pr_warn("%s: Invalid zone size",
+ disk->disk_name);
+ return -ENODEV;
+ }
+
+ /*
+ * Don't allow zoned device with non power_of_2 zone size with
+ * zone capacity less than zone size.
+ */
+ if (!is_power_of_2(zone->len) &&
+ zone->capacity < zone->len) {
+ pr_warn("%s: Invalid zoned size with non power of 2 zone size and zone capacity < zone size",
+ disk->disk_name);
return -ENODEV;
}
args->zone_sectors = zone->len;
- args->nr_zones = (capacity + zone->len - 1) >> ilog2(zone->len);
+ /*
+ * Division is used to calculate nr_zones for both power_of_2
+ * and non power_of_2 zone sizes as it is not in the hot path.
+ */
+ args->nr_zones = div64_u64(capacity + zone->len - 1, zone->len);
} else if (zone->start + args->zone_sectors < capacity) {
if (zone->len != args->zone_sectors) {
pr_warn("%s: Invalid zoned device with non constant zone size\n",
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 22fe512ee..32d7bd7b1 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -686,6 +686,22 @@ static inline unsigned int blk_queue_zone_no(struct request_queue *q,
return div64_u64(sector, zone_sectors);
}
+static inline bool blk_queue_is_zone_start(struct request_queue *q, sector_t sec)
+{
+ sector_t zone_sectors = blk_queue_zone_sectors(q);
+ u64 remainder = 0;
+
+ if (!blk_queue_is_zoned(q))
+ return false;
+
+ if (is_power_of_2(zone_sectors))
+ return IS_ALIGNED(sec, zone_sectors);
+
+ div64_u64_rem(sec, zone_sectors, &remainder);
+ /* if there is a remainder, then the sector is not aligned */
+ return remainder == 0;
+}
+
static inline bool blk_queue_zone_is_seq(struct request_queue *q,
sector_t sector)
{
@@ -732,6 +748,12 @@ static inline unsigned int blk_queue_zone_no(struct request_queue *q,
{
return 0;
}
+
+static inline bool blk_queue_is_zone_start(struct request_queue *q, sector_t sec)
+{
+ return false;
+}
+
static inline unsigned int queue_max_open_zones(const struct request_queue *q)
{
return 0;
--
2.25.1
next prev parent reply other threads:[~2022-05-16 16:54 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220516165418eucas1p2be592d9cd4b35f6b71d39ccbe87f3fef@eucas1p2.samsung.com>
2022-05-16 16:54 ` [PATCH v4 00/13] support non power of 2 zoned devices Pankaj Raghav
[not found] ` <CGME20220516165419eucas1p104aadda60df323e6154bfc3b92103b7b@eucas1p1.samsung.com>
2022-05-16 16:54 ` [PATCH v4 01/13] block: make blkdev_nr_zones and blk_queue_zone_no generic for npo2 zsze Pankaj Raghav
[not found] ` <CGME20220516165421eucas1p2515446ac290987bdb9af24ffb835b287@eucas1p2.samsung.com>
2022-05-16 16:54 ` Pankaj Raghav [this message]
2022-05-16 19:05 ` [PATCH v4 02/13] block: allow blk-zoned devices to have non-power-of-2 zone size Pankaj Raghav
[not found] ` <CGME20220516165422eucas1p174acec28848a9c2178376f092af3fa1c@eucas1p1.samsung.com>
2022-05-16 16:54 ` [PATCH v4 03/13] nvme: zns: Allow ZNS drives that have non-power_of_2 " Pankaj Raghav
[not found] ` <CGME20220516165424eucas1p2ee38cd64260539e5cac8d1fa4d0cba38@eucas1p2.samsung.com>
2022-05-16 16:54 ` [PATCH v4 04/13] nvmet: Allow ZNS target to support non-power_of_2 zone sizes Pankaj Raghav
2022-05-17 14:19 ` Johannes Thumshirn
[not found] ` <CGME20220516165425eucas1p29fcd11d7051d9d3a9a9efc17cd3b6999@eucas1p2.samsung.com>
2022-05-16 16:54 ` [PATCH v4 05/13] btrfs: zoned: Cache superblock location in btrfs_zoned_device_info Pankaj Raghav
2022-05-16 21:58 ` David Sterba
2022-05-17 7:55 ` Pankaj Raghav
[not found] ` <CGME20220516165427eucas1p1cfd87ca44ec314ea1d2ddc8ece7259f9@eucas1p1.samsung.com>
2022-05-16 16:54 ` [PATCH v4 06/13] btrfs: zoned: Make sb_zone_number function non power of 2 compatible Pankaj Raghav
2022-05-17 6:53 ` Johannes Thumshirn
2022-05-17 11:51 ` David Sterba
[not found] ` <CGME20220516165428eucas1p1374b5f9592db3ca6a6551aff975537ce@eucas1p1.samsung.com>
2022-05-16 16:54 ` [PATCH v4 07/13] btrfs: zoned: use generic btrfs zone helpers to support npo2 zoned devices Pankaj Raghav
2022-05-17 12:30 ` David Sterba
2022-05-18 9:40 ` Pankaj Raghav
2022-05-18 11:21 ` David Sterba
2022-05-19 4:13 ` Naohiro Aota
[not found] ` <CGME20220516165429eucas1p272c8b4325a488675f08f2d7016aa6230@eucas1p2.samsung.com>
2022-05-16 16:54 ` [PATCH v4 08/13] btrfs:zoned: make sb for npo2 zone devices align with sb log offsets Pankaj Raghav
2022-05-17 6:50 ` Johannes Thumshirn
2022-05-17 8:00 ` Pankaj Raghav
2022-05-17 12:42 ` David Sterba
2022-05-18 9:15 ` Pankaj Raghav
2022-05-19 7:57 ` Johannes Thumshirn
2022-05-20 9:06 ` Pankaj Raghav
2022-05-20 9:15 ` Johannes Thumshirn
2022-05-19 7:59 ` Naohiro Aota
2022-05-20 9:09 ` Pankaj Raghav
[not found] ` <CGME20220516165430eucas1p214cca8eaba1db2c98d947444cad4f18f@eucas1p2.samsung.com>
2022-05-16 16:54 ` [PATCH v4 09/13] btrfs: zoned: relax the alignment constraint for zoned devices Pankaj Raghav
[not found] ` <CGME20220516165432eucas1p2e1ea74d44738e44745f49e37b6b9e503@eucas1p2.samsung.com>
2022-05-16 16:54 ` [PATCH v4 10/13] zonefs: allow non power of 2 " Pankaj Raghav
[not found] ` <CGME20220516165434eucas1p12b178fb83cc93470933e3d72c40e9004@eucas1p1.samsung.com>
2022-05-16 16:54 ` [PATCH v4 11/13] null_blk: " Pankaj Raghav
2022-05-17 4:12 ` kernel test robot
[not found] ` <CGME20220516165435eucas1p1dff8d9d039a76278ef1c09dba4b4e1fe@eucas1p1.samsung.com>
2022-05-16 16:54 ` [PATCH v4 12/13] null_blk: use zone_size_sects_shift for " Pankaj Raghav
[not found] ` <CGME20220516165436eucas1p178d079302dae3a9fca696b13b0390deb@eucas1p1.samsung.com>
2022-05-16 16:54 ` [PATCH v4 13/13] dm-zoned: ensure only power of 2 zone sizes are allowed Pankaj Raghav
2022-05-17 8:10 ` [PATCH v4 00/13] support non power of 2 zoned devices Christoph Hellwig
2022-05-17 9:18 ` Javier González
2022-05-18 8:00 ` Christoph Hellwig
2022-05-19 15:25 ` Javier González
2022-05-17 15:34 ` [dm-devel] " Theodore Ts'o
2022-05-18 23:06 ` Luis Chamberlain
2022-05-19 3:08 ` Damien Le Moal
2022-05-19 3:12 ` Luis Chamberlain
2022-05-19 3:19 ` Damien Le Moal
2022-05-19 7:34 ` Johannes Thumshirn
2022-05-20 3:47 ` Damien Le Moal
2022-05-20 6:07 ` Hannes Reinecke
2022-05-20 6:27 ` Javier González
2022-05-20 6:41 ` Damien Le Moal
[not found] ` <CGME20220520065941eucas1p105cf273ede995dc4bf92f3245fad09b1@eucas1p1.samsung.com>
2022-05-20 6:59 ` Javier González
2022-05-20 9:30 ` Pankaj Raghav
2022-05-20 17:18 ` David Sterba
2022-05-23 8:25 ` Pankaj Raghav
2022-05-20 9:30 ` Johannes Thumshirn
[not found] ` <CGME20220520101610eucas1p1822ca6014e2a1d55ae74476f83c4de1d@eucas1p1.samsung.com>
2022-05-20 10:16 ` Javier González
2022-05-16 13:39 Pankaj Raghav
[not found] ` <CGME20220516133925eucas1p1414fab2cfa7da1d6258315cbd33e1685@eucas1p1.samsung.com>
2022-05-16 13:39 ` [PATCH v4 02/13] block: allow blk-zoned devices to have non-power-of-2 zone size Pankaj Raghav
2022-05-16 14:00 ` Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220516165416.171196-3-p.raghav@samsung.com \
--to=p.raghav@samsung.com \
--cc=axboe@kernel.dk \
--cc=damien.lemoal@opensource.wdc.com \
--cc=dm-devel@redhat.com \
--cc=dsterba@suse.com \
--cc=gost.dev@samsung.com \
--cc=hch@lst.de \
--cc=jiangbo.365@bytedance.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=mcgrof@kernel.org \
--cc=pankydev8@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).