linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, krzysztof.kozlowski+dt@linaro.org,
	andrew@lunn.ch, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] dt-bindings: net: orion-mdio: Convert to JSON schema
Date: Mon, 16 May 2022 13:16:39 -0500	[thread overview]
Message-ID: <20220516181639.GB2997786-robh@kernel.org> (raw)
In-Reply-To: <20220505210621.3637268-1-chris.packham@alliedtelesis.co.nz>

On Fri, May 06, 2022 at 09:06:20AM +1200, Chris Packham wrote:
> Convert the marvell,orion-mdio binding to JSON schema.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> 
> Notes:
>     This does throw up the following dtbs_check warnings for turris-mox:
>     
>     arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: switch0@10:reg: [[16], [0]] is too long
>             From schema: Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
>     arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: switch0@2:reg: [[2], [0]] is too long
>             From schema: Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
>     arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: switch1@11:reg: [[17], [0]] is too long
>             From schema: Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
>     arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: switch1@2:reg: [[2], [0]] is too long
>             From schema: Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
>     arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: switch2@12:reg: [[18], [0]] is too long
>             From schema: Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
>     arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: switch2@2:reg: [[2], [0]] is too long
>             From schema: Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
>     
>     I think they're all genuine but I'm hesitant to leap in and fix them
>     without being able to test them.
>     
>     I also need to set unevaluatedProperties: true to cater for the L2
>     switch on turris-mox (and probably others). That might be better tackled
>     in the core mdio.yaml schema but I wasn't planning on touching that.
>     
>     Changes in v2:
>     - Add Andrew as maintainer (thanks for volunteering)
> 
>  .../bindings/net/marvell,orion-mdio.yaml      | 60 +++++++++++++++++++
>  .../bindings/net/marvell-orion-mdio.txt       | 54 -----------------
>  2 files changed, 60 insertions(+), 54 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
> new file mode 100644
> index 000000000000..fe3a3412f093
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/marvell,orion-mdio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell MDIO Ethernet Controller interface
> +
> +maintainers:
> +  - Andrew Lunn <andrew@lunn.ch>
> +
> +description: |
> +  The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, MV78xx0,
> +  Armada 370, Armada XP, Armada 7k and Armada 8k have an identical unit that
> +  provides an interface with the MDIO bus. Additionally, Armada 7k and Armada
> +  8k has a second unit which provides an interface with the xMDIO bus. This
> +  driver handles these interfaces.
> +
> +allOf:
> +  - $ref: "mdio.yaml#"
> +
> +properties:
> +  compatible:
> +    enum:
> +      - marvell,orion-mdio
> +      - marvell,xmdio
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 4

Really this should be better defined, but the original was not.

> +
> +required:
> +  - compatible
> +  - reg
> +
> +unevaluatedProperties: true

This must be false.

> +
> +examples:
> +  - |
> +    mdio@d0072004 {
> +      compatible = "marvell,orion-mdio";
> +      reg = <0xd0072004 0x4>;
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      interrupts = <30>;
> +
> +      phy0: ethernet-phy@0 {
> +        reg = <0>;
> +      };
> +
> +      phy1: ethernet-phy@1 {
> +        reg = <1>;
> +      };
> +    };
> diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
> deleted file mode 100644
> index 3f3cfc1d8d4d..000000000000
> --- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
> +++ /dev/null
> @@ -1,54 +0,0 @@
> -* Marvell MDIO Ethernet Controller interface
> -
> -The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
> -MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an
> -identical unit that provides an interface with the MDIO bus.
> -Additionally, Armada 7k and Armada 8k has a second unit which
> -provides an interface with the xMDIO bus. This driver handles
> -these interfaces.
> -
> -Required properties:
> -- compatible: "marvell,orion-mdio" or "marvell,xmdio"
> -- reg: address and length of the MDIO registers.  When an interrupt is
> -  not present, the length is the size of the SMI register (4 bytes)
> -  otherwise it must be 0x84 bytes to cover the interrupt control
> -  registers.
> -
> -Optional properties:
> -- interrupts: interrupt line number for the SMI error/done interrupt
> -- clocks: phandle for up to four required clocks for the MDIO instance
> -
> -The child nodes of the MDIO driver are the individual PHY devices
> -connected to this MDIO bus. They must have a "reg" property given the
> -PHY address on the MDIO bus.
> -
> -Example at the SoC level without an interrupt property:
> -
> -mdio {
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -	compatible = "marvell,orion-mdio";
> -	reg = <0xd0072004 0x4>;
> -};
> -
> -Example with an interrupt property:
> -
> -mdio {
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -	compatible = "marvell,orion-mdio";
> -	reg = <0xd0072004 0x84>;
> -	interrupts = <30>;
> -};
> -
> -And at the board level:
> -
> -mdio {
> -	phy0: ethernet-phy@0 {
> -		reg = <0>;
> -	};
> -
> -	phy1: ethernet-phy@1 {
> -		reg = <1>;
> -	};
> -}
> -- 
> 2.36.0
> 
> 

  parent reply	other threads:[~2022-05-16 18:16 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-05 21:06 [PATCH v2] dt-bindings: net: orion-mdio: Convert to JSON schema Chris Packham
2022-05-10  0:28 ` Jakub Kicinski
2022-05-10  0:41   ` Andrew Lunn
2022-05-10  0:43     ` Jakub Kicinski
2022-05-16 18:14     ` Rob Herring
2022-05-10  0:47   ` Chris Packham
2022-05-10 23:12 ` Andrew Lunn
2022-05-11  2:20 ` patchwork-bot+netdevbpf
2022-05-16 18:16 ` Rob Herring [this message]
2022-05-16 22:18   ` Chris Packham
2022-05-16 22:27     ` Chris Packham
2022-05-18 16:18       ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220516181639.GB2997786-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=chris.packham@alliedtelesis.co.nz \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).