# Please note that this is only a sample, we recommend you to change it to fit
# your needs.
# You should override this file using a post-build script.
# See http://buildroot.org/manual.html#rootfs-custom
# and http://elinux.org/RPiconfig for a description of config.txt syntax

arm_64bit=1
enable_uart=1
# uart_2ndstage=1
upstream_kernel=1

kernel=Image

hdmi_enable_4kp60=1
# core_freq=500
# core_freq_min=500

# [HDMI:0]
# hdmi_group=1
# hdmi_mode=97

# disable_fw_kms_setup=1
# hdmi_edid_file:0=1
# hdmi_edid_filename:0=1366x768.bin
# hdmi_ignore_edid:0=1
# hdmi_edid_file:1=1
# hdmi_edid_filename:1=1366x768.bin
# hdmi_ignore_edid:1=1

# kernel=u-boot.bin

# To use an external initramfs file
#initramfs rootfs.cpio.gz

# Disable overscan assuming the display supports displaying the full resolution
# If the text shown on the screen disappears off the edge, comment this out
# disable_overscan=1

# How much memory in MB to assign to the GPU on Pi models having
# 256, 512 or 1024 MB total memory
# gpu_mem_256=100
# gpu_mem_512=100
# gpu_mem_1024=100

# fixes rpi3 ttyAMA0 serial console
# dtoverlay=pi3-miniuart-bt
dtoverlay=disable-bt

# Enable KMS driver
# dtoverlay=vc4-fkms-v3d
dtoverlay=vc4-kms-v3d-pi4
# dtoverlay=po-x20-display
# dtoverlay=vc4-kms-dsi-7inch
# dtoverlay=parade-ps8640

# VGA666 with firmware
# enable_dpi_lcd=1
# display_default_lcd=1
# dtparam=i2c_arm=off
# dtparam=spi=off
# dpi_group=1
# dpi_mode=4
# gpio=2-21=a2

# hdmi_group=2
# hdmi_mode=82

# mask_gpu_interrupt0=3072
# mask_gpu_interrupt1=67135266