[PATCH 0/4] MediaTek Helio X10 MT6795 - MT6331/6332 Regulators

[PATCH 0/4] MediaTek Helio X10 MT6795 - MT6331/6332 Regulators

[AngeloGioacchino Del Regno]

In an effort to give some love to the apparently forgotten MT6795 SoC,
I am upstreaming more components that are necessary to support platforms
powered by this one apart from a simple boot to serial console.

This series adds support for the regulators found in MT6331 and MT6332
main/companion PMICs.

Adding support to each driver in each subsystem is done in different
patch series as to avoid spamming uninteresting patches to maintainers.

This series depends on another two series series [1], [2] named
"MediaTek Helio X10 MT6795 - MT6331/6332 PMIC Wrapper" and
"MediaTek Helio X10 MT6795 - MT6331/6332 PMIC MFD integration"

Tested on a MT6795 Sony Xperia M5 (codename "Holly") smartphone.


[1]: https://lore.kernel.org/lkml/20220520124039.228314-1-angelogioacchino.delregno@collabora.com/T/#t
[2]: https://lore.kernel.org/lkml/20220520124617.228808-1-angelogioacchino.delregno@collabora.com/T/#t

AngeloGioacchino Del Regno (4):
  dt-bindings: regulator: Add bindings for MT6331 regulator
  regulator: Add driver for MT6331 PMIC regulators
  dt-bindings: regulator: Add bindings for MT6332 regulator
  regulator: Add driver for MT6332 PMIC regulators

 .../bindings/regulator/mt6331-regulator.yaml  | 272 ++++++++++
 .../bindings/regulator/mt6332-regulator.yaml  | 111 ++++
 drivers/regulator/Kconfig                     |  18 +
 drivers/regulator/Makefile                    |   2 +
 drivers/regulator/mt6331-regulator.c          | 507 ++++++++++++++++++
 drivers/regulator/mt6332-regulator.c          | 431 +++++++++++++++
 include/linux/regulator/mt6331-regulator.h    |  46 ++
 include/linux/regulator/mt6332-regulator.h    |  27 +
 8 files changed, 1414 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/mt6331-regulator.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/mt6332-regulator.yaml
 create mode 100644 drivers/regulator/mt6331-regulator.c
 create mode 100644 drivers/regulator/mt6332-regulator.c
 create mode 100644 include/linux/regulator/mt6331-regulator.h
 create mode 100644 include/linux/regulator/mt6332-regulator.h

-- 
2.35.1

[PATCH 1/4] dt-bindings: regulator: Add bindings for MT6331 regulator

[AngeloGioacchino Del Regno]

Add the bindings for the regulators found in the MT6331 PMIC.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 .../bindings/regulator/mt6331-regulator.yaml  | 272 ++++++++++++++++++
 1 file changed, 272 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/mt6331-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6331-regulator.yaml
new file mode 100644
index 000000000000..333c74cdbcbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6331-regulator.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6331-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6331 Regulator from MediaTek Integrated
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  List of regulators provided by this controller. It is named
+  according to its regulator type, buck_<name> and ldo_<name>.
+  MT6331 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck_v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(avdd32aud|auxa32)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(avdd32aud|auxa32)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_vcam(a|af|d|io)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vcam(a|af|d|io)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_vtcxo[12]$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vtcxo[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+  "^ldo_vgp[1234]$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vgp[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6331_vdvfs11_reg: buck-vdvfs11 {
+          regulator-name = "vdvfs11";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs12_reg: buck-vdvfs12 {
+          regulator-name = "vdvfs12";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs13_reg: buck-vdvfs13 {
+          regulator-name = "vdvfs13";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs14_reg: buck-vdvfs14 {
+          regulator-name = "vdvfs14";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vcore2_reg: buck-vcore2 {
+          regulator-name = "vcore2";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vio18_reg: buck-vio18 {
+          regulator-name = "vio18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <0>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vtcxo1_reg: ldo-vtcxo1 {
+          regulator-name = "vtcxo1";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vtcxo2_reg: ldo-vtcxo2 {
+          regulator-name = "vtcxo2";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_avdd32_aud_reg: ldo-avdd32aud {
+          regulator-name = "avdd32_aud";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6331_vauxa32_reg: ldo-vauxa32 {
+          regulator-name = "vauxa32";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6331_vcama_reg: ldo-vcama {
+          regulator-name = "vcama";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+        };
+        mt6331_vio28_reg: ldo-vio28 {
+          regulator-name = "vio28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vcamaf_reg: ldo-vcamaf {
+          regulator-name = "vcam_af";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vmc_reg: ldo-vmc {
+          regulator-name = "vmc";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vmch_reg: ldo-vmch {
+          regulator-name = "vmch";
+          regulator-min-microvolt = <3000000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vemc33_reg: ldo-vemc33 {
+          regulator-name = "vemc33";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vgp1_reg: ldo-vgp1 {
+          regulator-name = "vgp1";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vsim1_reg: ldo-vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6331_vsim2_reg: ldo-vsim2 {
+          regulator-name = "vsim2";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6331_vmipi_reg: ldo-vmipi {
+          regulator-name = "vmipi";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vibr_reg: ldo-vibr {
+          regulator-name = "vibr";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vgp4_reg: ldo-vgp4 {
+          regulator-name = "vgp4";
+          regulator-min-microvolt = <1600000>;
+          regulator-max-microvolt = <2200000>;
+        };
+        mt6331_vcamd_reg: ldo-vcamd {
+          regulator-name = "vcamd";
+          regulator-min-microvolt = <900000>;
+          regulator-max-microvolt = <1500000>;
+        };
+        mt6331_vusb10_reg: ldo-vusb10 {
+          regulator-name = "vusb";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <1300000>;
+          regulator-boot-on;
+        };
+        mt6331_vcamio_reg: ldo-vcamio {
+          regulator-name = "vcam_io";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+        };
+        mt6331_vsram_reg: ldo-vsram {
+          regulator-name = "vsram";
+          regulator-min-microvolt = <1012500>;
+          regulator-max-microvolt = <1012500>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vgp2_reg: ldo-vgp2 {
+          regulator-name = "vgp2";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1500000>;
+          regulator-boot-on;
+        };
+        mt6331_vgp3_reg: ldo-vgp3 {
+          regulator-name = "vgp3";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+        };
+        mt6331_vrtc_reg: ldo-vrtc {
+          regulator-name = "vrtc";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+        };
+        mt6331_vdig18_reg: ldo-vdig18 {
+          regulator-name = "dvdd18_dig";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+        };
+      };
+    };
+...
-- 
2.35.1

[PATCH 2/4] regulator: Add driver for MT6331 PMIC regulators

[AngeloGioacchino Del Regno]

Add a driver for the regulators found in the MT6331 PMIC.
This PMIC features six buck and 21 Low DropOut (LDO) regulators.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/regulator/Kconfig                  |   9 +
 drivers/regulator/Makefile                 |   1 +
 drivers/regulator/mt6331-regulator.c       | 507 +++++++++++++++++++++
 include/linux/regulator/mt6331-regulator.h |  46 ++
 4 files changed, 563 insertions(+)
 create mode 100644 drivers/regulator/mt6331-regulator.c
 create mode 100644 include/linux/regulator/mt6331-regulator.h

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index cbe0f96ca342..dfb52b093c6f 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -777,6 +777,15 @@ config REGULATOR_MT6323
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6331
+	tristate "MediaTek MT6331 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6331 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface
+
 config REGULATOR_MT6358
 	tristate "MediaTek MT6358 PMIC"
 	depends on MFD_MT6397
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 8d3ee8b6d41d..3799e2673825 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
+obj-$(CONFIG_REGULATOR_MT6331)	+= mt6331-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6359)	+= mt6359-regulator.o
 obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
diff --git a/drivers/regulator/mt6331-regulator.c b/drivers/regulator/mt6331-regulator.c
new file mode 100644
index 000000000000..e147b883bf96
--- /dev/null
+++ b/drivers/regulator/mt6331-regulator.c
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ *
+ * Based on mt6323-regulator.c,
+ *     Copyright (c) 2016 MediaTek Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6331/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6331-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6331_LDO_MODE_NORMAL	0
+#define MT6331_LDO_MODE_LP	1
+
+/*
+ * MT6331 regulators information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ * @status_reg: Register for regulator enable status where qi unavailable
+ * @status_mask: Mask for querying regulator enable status
+ */
+struct mt6331_regulator_info {
+	struct regulator_desc desc;
+	u32 qi;
+	u32 vselon_reg;
+	u32 vselctrl_reg;
+	u32 vselctrl_mask;
+	u32 modeset_reg;
+	u32 modeset_mask;
+	u32 status_reg;
+	u32 status_mask;
+};
+
+#define MT6331_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
+		vosel, vosel_mask, voselon, vosel_ctrl)			\
+[MT6331_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6331_volt_range_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6331_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = (max - min)/step + 1,			\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(0),					\
+	},								\
+	.qi = BIT(13),							\
+	.vselon_reg = voselon,						\
+	.vselctrl_reg = vosel_ctrl,					\
+	.vselctrl_mask = BIT(1),					\
+	.status_mask = 0,						\
+}
+
+#define MT6331_LDO_AO(match, vreg, ldo_volt_table, vosel, vosel_mask)	\
+[MT6331_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6331_volt_table_ao_ops,			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6331_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+	},								\
+}
+
+#define MT6331_LDO_S(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
+		vosel_mask, _modeset_reg, _modeset_mask, _status_reg,	\
+		_status_mask)						\
+[MT6331_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6331_volt_table_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6331_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.qi = 0,							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+	.status_reg = _status_reg,					\
+	.status_mask = _status_mask,					\
+}
+
+#define MT6331_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
+		vosel_mask, _modeset_reg, _modeset_mask)		\
+[MT6331_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6331_volt_table_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6331_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+	.status_mask = 0,						\
+}
+
+#define MT6331_REG_FIXED(match, vreg, enreg, enbit, qibit, volt,	\
+		_modeset_reg, _modeset_mask)				\
+[MT6331_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6331_volt_fixed_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6331_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = 1,					\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+		.min_uV = volt,						\
+	},								\
+	.qi = BIT(qibit),						\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+	.status_mask = 0,						\
+}
+
+static const struct linear_range buck_volt_range[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
+};
+
+static const unsigned int ldo_volt_table1[] = {
+	2800000, 3000000, 0, 3200000
+};
+
+static const unsigned int ldo_volt_table2[] = {
+	1500000, 1800000, 2500000, 2800000, 1500000, 1800000, 2500000, 2800000,
+};
+
+static const unsigned int ldo_volt_table3[] = {
+	1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000,
+};
+
+static const unsigned int ldo_volt_table3a[] = {
+	1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000,
+	1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000,
+};
+
+static const unsigned int ldo_volt_table4[] = {
+	0, 0, 1700000, 1800000, 1860000, 2760000, 3000000, 3100000,
+};
+
+static const unsigned int ldo_volt_table5[] = {
+	1800000, 3300000, 1800000, 3300000, 1800000, 3300000, 1800000, 3300000,
+};
+
+static const unsigned int ldo_volt_table6[] = {
+	3000000, 3300000,
+};
+
+static const unsigned int ldo_volt_table7[] = {
+	1200000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000,
+};
+
+static const unsigned int ldo_volt_table8[] = {
+	900000, 1000000, 1100000, 1220000, 1300000, 1500000, 1500000, 1500000,
+};
+
+static const unsigned int ldo_volt_table9[] = {
+	1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1300000,
+	1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1300000,
+};
+
+static const unsigned int ldo_volt_table10[] = {
+	1200000, 1300000, 1500000, 1800000,
+	1200000, 1300000, 1500000, 1800000,
+	1200000, 1300000, 1500000, 1800000,
+	1200000, 1300000, 1500000, 1800000,
+};
+
+static const unsigned int ldo_volt_table11[] = {
+	1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000,
+};
+
+static int mt6331_get_status(struct regulator_dev *rdev)
+{
+	struct mt6331_regulator_info *info = rdev_get_drvdata(rdev);
+	u32 reg, en_mask, regval;
+	int ret;
+
+	if (info->qi > 0) {
+		reg = info->desc.enable_reg;
+		en_mask = info->qi;
+	} else {
+		reg = info->status_reg;
+		en_mask = info->status_mask;
+	}
+
+	ret = regmap_read(rdev->regmap, reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	return (regval & en_mask) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6331_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	int ret, val = 0;
+	struct mt6331_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	switch (mode) {
+	case REGULATOR_MODE_STANDBY:
+		val = MT6331_LDO_MODE_LP;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6331_LDO_MODE_NORMAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val <<= ffs(info->modeset_mask) - 1;
+
+	ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+				  info->modeset_mask, val);
+
+	return ret;
+}
+
+static unsigned int mt6331_ldo_get_mode(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	unsigned int mode;
+	int ret;
+	struct mt6331_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= info->modeset_mask;
+	val >>= ffs(info->modeset_mask) - 1;
+
+	if (val & 0x1)
+		mode = REGULATOR_MODE_STANDBY;
+	else
+		mode = REGULATOR_MODE_NORMAL;
+
+	return mode;
+}
+
+static const struct regulator_ops mt6331_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6331_get_status,
+};
+
+static const struct regulator_ops mt6331_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6331_get_status,
+	.set_mode = mt6331_ldo_set_mode,
+	.get_mode = mt6331_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6331_volt_table_ao_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.set_mode = mt6331_ldo_set_mode,
+	.get_mode = mt6331_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6331_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6331_get_status,
+	.set_mode = mt6331_ldo_set_mode,
+	.get_mode = mt6331_ldo_get_mode,
+};
+
+/* The array is indexed by id(MT6331_ID_XXX) */
+static struct mt6331_regulator_info mt6331_regulators[] = {
+	MT6331_BUCK("buck-vdvfs11", VDVFS11, 700000, 1493750, 6250,
+		buck_volt_range, MT6331_VDVFS11_CON9, MT6331_VDVFS11_CON11, GENMASK(6, 0),
+		MT6331_VDVFS11_CON12, MT6331_VDVFS11_CON7),
+	MT6331_BUCK("buck-vdvfs12", VDVFS12, 700000, 1493750, 6250,
+		buck_volt_range, MT6331_VDVFS12_CON9, MT6331_VDVFS12_CON11, GENMASK(6, 0),
+		MT6331_VDVFS12_CON12, MT6331_VDVFS12_CON7),
+	MT6331_BUCK("buck-vdvfs13", VDVFS13, 700000, 1493750, 6250,
+		buck_volt_range, MT6331_VDVFS13_CON9, MT6331_VDVFS13_CON11, GENMASK(6, 0),
+		MT6331_VDVFS13_CON12, MT6331_VDVFS13_CON7),
+	MT6331_BUCK("buck-vdvfs14", VDVFS14, 700000, 1493750, 6250,
+		buck_volt_range, MT6331_VDVFS14_CON9, MT6331_VDVFS14_CON11, GENMASK(6, 0),
+		MT6331_VDVFS14_CON12, MT6331_VDVFS14_CON7),
+	MT6331_BUCK("buck-vcore2", VCORE2, 700000, 1493750, 6250,
+		buck_volt_range, MT6331_VCORE2_CON9, MT6331_VCORE2_CON11, GENMASK(6, 0),
+		MT6331_VCORE2_CON12, MT6331_VCORE2_CON7),
+	MT6331_REG_FIXED("buck-vio18", VIO18, MT6331_VIO18_CON7, 0, 13, 1800000, 0, 0),
+	MT6331_REG_FIXED("ldo-vtcxo1", VTCXO1, MT6331_ANALDO_CON1, 10, 15, 2800000,
+		MT6331_ANALDO_CON1, GENMASK(1, 0)),
+	MT6331_REG_FIXED("ldo-vtcxo2", VTCXO2, MT6331_ANALDO_CON2, 10, 15, 2800000,
+		MT6331_ANALDO_CON2, GENMASK(1, 0)),
+	MT6331_LDO("ldo-avdd32aud", AVDD32_AUD, ldo_volt_table1, MT6331_ANALDO_CON3, 10,
+		MT6331_ANALDO_CON10, GENMASK(6, 5), MT6331_ANALDO_CON3, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vauxa32", VAUXA32, ldo_volt_table1, MT6331_ANALDO_CON4, 10,
+		MT6331_ANALDO_CON6, GENMASK(6, 5), MT6331_ANALDO_CON4, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vcama", VCAMA, ldo_volt_table2, MT6331_ANALDO_CON5, 15,
+		MT6331_ANALDO_CON9, GENMASK(6, 4), 0, 0),
+	MT6331_REG_FIXED("ldo-vio28", VIO28, MT6331_DIGLDO_CON1, 10, 15, 2800000,
+		MT6331_DIGLDO_CON1, GENMASK(1, 0)),
+	MT6331_LDO_S("ldo-vcamaf", VCAM_AF, ldo_volt_table3, MT6331_DIGLDO_CON2, 10,
+		MT6331_DIGLDO_CON14, GENMASK(6, 4), MT6331_DIGLDO_CON2, GENMASK(1, 0),
+		MT6331_EN_STATUS1, BIT(0)),
+	MT6331_LDO("ldo-vmc", VMC, ldo_volt_table5, MT6331_DIGLDO_CON3, 10,
+		MT6331_DIGLDO_CON15, GENMASK(6, 4), MT6331_DIGLDO_CON3, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vmch", VMCH, ldo_volt_table6, MT6331_DIGLDO_CON4, 10,
+		MT6331_DIGLDO_CON16, BIT(6), MT6331_DIGLDO_CON4, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vemc33", VEMC33, ldo_volt_table6, MT6331_DIGLDO_CON5, 10,
+		MT6331_DIGLDO_CON17, BIT(6), MT6331_DIGLDO_CON5, GENMASK(1, 0)),
+	MT6331_LDO_S("ldo-vgp1", VGP1, ldo_volt_table3, MT6331_DIGLDO_CON6, 10,
+		MT6331_DIGLDO_CON19, GENMASK(6, 4), MT6331_DIGLDO_CON6, GENMASK(1, 0),
+		MT6331_EN_STATUS1, BIT(4)),
+	MT6331_LDO("ldo-vsim1", VSIM1, ldo_volt_table4, MT6331_DIGLDO_CON8, 10,
+		MT6331_DIGLDO_CON21, GENMASK(6, 4), MT6331_DIGLDO_CON8, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vsim2", VSIM2, ldo_volt_table4, MT6331_DIGLDO_CON9, 10,
+		MT6331_DIGLDO_CON22, GENMASK(6, 4), MT6331_DIGLDO_CON9, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vmipi", VMIPI, ldo_volt_table3a, MT6331_SYSLDO_CON5, 10,
+		MT6331_SYSLDO_CON13, GENMASK(6, 3), MT6331_SYSLDO_CON5, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vibr", VIBR, ldo_volt_table3, MT6331_DIGLDO_CON12, 10,
+		MT6331_DIGLDO_CON20, GENMASK(6, 4), MT6331_DIGLDO_CON12, GENMASK(1, 0)),
+	MT6331_LDO_S("ldo-vgp4", VGP4, ldo_volt_table7, MT6331_DIGLDO_CON7, 10,
+		MT6331_DIGLDO_CON18, GENMASK(6, 4), MT6331_DIGLDO_CON7, GENMASK(1, 0),
+		MT6331_EN_STATUS1, BIT(5)),
+	MT6331_LDO_S("ldo-vcamd", VCAMD, ldo_volt_table8, MT6331_SYSLDO_CON1, 15,
+		MT6331_SYSLDO_CON9, GENMASK(6, 4), MT6331_SYSLDO_CON1, GENMASK(1, 0),
+		MT6331_EN_STATUS1, BIT(11)),
+	MT6331_LDO("ldo-vusb10", VUSB10, ldo_volt_table9, MT6331_SYSLDO_CON2, 10,
+		MT6331_SYSLDO_CON10, GENMASK(6, 3), MT6331_SYSLDO_CON2, GENMASK(1, 0)),
+	MT6331_LDO_S("ldo-vcamio", VCAM_IO,  ldo_volt_table10, MT6331_SYSLDO_CON3, 10,
+		MT6331_SYSLDO_CON11, GENMASK(6, 3), MT6331_SYSLDO_CON3, GENMASK(1, 0),
+		MT6331_EN_STATUS1, BIT(13)),
+	MT6331_REG_FIXED("ldo-vsram", VSRAM_DVFS1, MT6331_SYSLDO_CON4, 10, 15, 1012500,
+		MT6331_SYSLDO_CON4, GENMASK(1, 0)),
+	MT6331_LDO_S("ldo-vgp2", VGP2, ldo_volt_table10, MT6331_SYSLDO_CON6, 10,
+		MT6331_SYSLDO_CON14, GENMASK(6, 3), MT6331_SYSLDO_CON6, GENMASK(1, 0),
+		MT6331_EN_STATUS1, BIT(15)),
+	MT6331_LDO_S("ldo-vgp3", VGP3, ldo_volt_table10, MT6331_SYSLDO_CON7, 10,
+		MT6331_SYSLDO_CON15, GENMASK(6, 3), MT6331_SYSLDO_CON7, GENMASK(1, 0),
+		MT6331_EN_STATUS2, BIT(0)),
+	MT6331_REG_FIXED("ldo-vrtc", VRTC, MT6331_DIGLDO_CON11, 8, 15, 2800000, 0, 0),
+	MT6331_LDO_AO("ldo-vdig18", VDIG18, ldo_volt_table11,
+		MT6331_DIGLDO_CON28, GENMASK(14, 12)),
+};
+
+static int mt6331_set_buck_vosel_reg(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6331 = dev_get_drvdata(pdev->dev.parent);
+	int i;
+	u32 regval;
+
+	for (i = 0; i < MT6331_ID_VREG_MAX; i++) {
+		if (mt6331_regulators[i].vselctrl_reg) {
+			if (regmap_read(mt6331->regmap,
+				mt6331_regulators[i].vselctrl_reg,
+				&regval) < 0) {
+				dev_err(&pdev->dev,
+					"Failed to read buck ctrl\n");
+				return -EIO;
+			}
+
+			if (regval & mt6331_regulators[i].vselctrl_mask) {
+				mt6331_regulators[i].desc.vsel_reg =
+				mt6331_regulators[i].vselon_reg;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int mt6331_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6331 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+	u32 reg_value;
+
+	/* Query buck controller to select activated voltage register part */
+	if (mt6331_set_buck_vosel_reg(pdev))
+		return -EIO;
+
+	/* Read PMIC chip revision to update constraints and voltage table */
+	if (regmap_read(mt6331->regmap, MT6331_HWCID, &reg_value) < 0) {
+		dev_err(&pdev->dev, "Failed to read Chip ID\n");
+		return -EIO;
+	}
+	reg_value &= GENMASK(7, 0);
+
+	dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value);
+
+	/*
+	 * ChipID 0x10 is "MT6331 E1", has a different voltage table and
+	 * it's currently not supported in this driver. Upon detection of
+	 * this ID, refuse to register the regulators, as we will wrongly
+	 * interpret the VSEL for this revision, potentially overvolting
+	 * some device.
+	 */
+	if (reg_value == 0x10) {
+		dev_err(&pdev->dev, "Chip version not supported. Bailing out.\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < MT6331_ID_VREG_MAX; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6331_regulators[i];
+		config.regmap = mt6331->regmap;
+		rdev = devm_regulator_register(&pdev->dev,
+				&mt6331_regulators[i].desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6331_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static const struct platform_device_id mt6331_platform_ids[] = {
+	{"mt6331-regulator", 0},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6331_platform_ids);
+
+static struct platform_driver mt6331_regulator_driver = {
+	.driver = {
+		.name = "mt6331-regulator",
+	},
+	.probe = mt6331_regulator_probe,
+	.id_table = mt6331_platform_ids,
+};
+
+module_platform_driver(mt6331_regulator_driver);
+
+MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6331 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/mt6331-regulator.h b/include/linux/regulator/mt6331-regulator.h
new file mode 100644
index 000000000000..2801a9879c14
--- /dev/null
+++ b/include/linux/regulator/mt6331-regulator.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#ifndef __LINUX_REGULATOR_MT6331_H
+#define __LINUX_REGULATOR_MT6331_H
+
+enum {
+	/* BUCK */
+	MT6331_ID_VDVFS11 = 0,
+	MT6331_ID_VDVFS12,
+	MT6331_ID_VDVFS13,
+	MT6331_ID_VDVFS14,
+	MT6331_ID_VCORE2,
+	MT6331_ID_VIO18,
+	/* LDO */
+	MT6331_ID_VTCXO1,
+	MT6331_ID_VTCXO2,
+	MT6331_ID_AVDD32_AUD,
+	MT6331_ID_VAUXA32,
+	MT6331_ID_VCAMA,
+	MT6331_ID_VIO28,
+	MT6331_ID_VCAM_AF,
+	MT6331_ID_VMC,
+	MT6331_ID_VMCH,
+	MT6331_ID_VEMC33,
+	MT6331_ID_VGP1,
+	MT6331_ID_VSIM1,
+	MT6331_ID_VSIM2,
+	MT6331_ID_VMIPI,
+	MT6331_ID_VIBR,
+	MT6331_ID_VGP4,
+	MT6331_ID_VCAMD,
+	MT6331_ID_VUSB10,
+	MT6331_ID_VCAM_IO,
+	MT6331_ID_VSRAM_DVFS1,
+	MT6331_ID_VGP2,
+	MT6331_ID_VGP3,
+	MT6331_ID_VRTC,
+	MT6331_ID_VDIG18,
+	MT6331_ID_VREG_MAX
+};
+
+#endif /* __LINUX_REGULATOR_MT6331_H */
-- 
2.35.1

[PATCH 3/4] dt-bindings: regulator: Add bindings for MT6332 regulator

[AngeloGioacchino Del Regno]

Add devicetree bindings for the regulators found in the MT6332 PMIC.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 .../bindings/regulator/mt6332-regulator.yaml  | 111 ++++++++++++++++++
 1 file changed, 111 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/mt6332-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6332-regulator.yaml
new file mode 100644
index 000000000000..51077a865dbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6332-regulator.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6332-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6332 Regulator from MediaTek Integrated
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  List of regulators provided by this controller. It is named
+  according to its regulator type, buck_<name> and ldo_<name>.
+  MT6332 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck_v(dram|dvfs2|pa|rf18a|rf18b|sbst)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(dram|dvfs2|pa|rf18a|rf18b|sbst)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(bif28|dig18|sram|usb33)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(bif28|dig18|sram|usb33)$"
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6332_vdram_reg: buck-vdram {
+          regulator-name = "vdram";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-allowed-modes = <0 1>;
+          regulator-always-on;
+        };
+        mt6332_vdvfs2_reg: buck-vdvfs2 {
+          regulator-name = "vdvfs2";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vpa_reg: buck-vpa {
+          regulator-name = "vpa";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <3400000>;
+        };
+        mt6332_vrf18a_reg: buck-vrf18a {
+          regulator-name = "vrf18a";
+          regulator-min-microvolt = <1050000>;
+          regulator-max-microvolt = <2240625>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vrf18b_reg: buck-vrf18b {
+          regulator-name = "vrf18b";
+          regulator-min-microvolt = <1050000>;
+          regulator-max-microvolt = <2240625>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vsbst_reg: buck-vsbst {
+          regulator-name = "vsbst";
+          regulator-min-microvolt = <3500000>;
+          regulator-max-microvolt = <7468750>;
+        };
+        mt6332_vauxb32_reg: ldo-vauxb32 {
+          regulator-name = "vauxb32";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6332_vbif28_reg: ldo-vbif28 {
+          regulator-name = "vbif28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+        };
+        mt6332_vdig18_reg: ldo-vdig18 {
+          regulator-name = "vdig18";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-always-on;
+        };
+        mt6332_vsram_reg: ldo-vsram {
+          regulator-name = "vauxa32";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-always-on;
+        };
+        mt6332_vusb33_reg: ldo-vusb33 {
+          regulator-name = "vusb33";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3300000>;
+        };
+      };
+    };
+...
-- 
2.35.1

[PATCH 4/4] regulator: Add driver for MT6332 PMIC regulators

[AngeloGioacchino Del Regno]

Add a driver for the regulators found in the MT6332 PMICs,
including six buck and four LDO regulators.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/regulator/Kconfig                  |   9 +
 drivers/regulator/Makefile                 |   1 +
 drivers/regulator/mt6332-regulator.c       | 431 +++++++++++++++++++++
 include/linux/regulator/mt6332-regulator.h |  27 ++
 4 files changed, 468 insertions(+)
 create mode 100644 drivers/regulator/mt6332-regulator.c
 create mode 100644 include/linux/regulator/mt6332-regulator.h

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index dfb52b093c6f..511441acb592 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -786,6 +786,15 @@ config REGULATOR_MT6331
 	  This driver supports the control of different power rails of device
 	  through regulator interface
 
+config REGULATOR_MT6332
+	tristate "MediaTek MT6332 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6332 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface
+
 config REGULATOR_MT6358
 	tristate "MediaTek MT6358 PMIC"
 	depends on MFD_MT6397
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3799e2673825..13dbac706ed8 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6331)	+= mt6331-regulator.o
+obj-$(CONFIG_REGULATOR_MT6332)	+= mt6332-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6359)	+= mt6359-regulator.o
 obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
diff --git a/drivers/regulator/mt6332-regulator.c b/drivers/regulator/mt6332-regulator.c
new file mode 100644
index 000000000000..fdad39eeded3
--- /dev/null
+++ b/drivers/regulator/mt6332-regulator.c
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ *
+ * Based on mt6323-regulator.c,
+ *     Copyright (c) 2016 MediaTek Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6332/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6332-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6332_LDO_MODE_NORMAL	0
+#define MT6332_LDO_MODE_LP	1
+
+/*
+ * MT6332 regulators information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ * @status_reg: Register for regulator enable status where qi unavailable
+ * @status_mask: Mask for querying regulator enable status
+ */
+struct mt6332_regulator_info {
+	struct regulator_desc desc;
+	u32 qi;
+	u32 vselon_reg;
+	u32 vselctrl_reg;
+	u32 vselctrl_mask;
+	u32 modeset_reg;
+	u32 modeset_mask;
+	u32 status_reg;
+	u32 status_mask;
+};
+
+#define MT6332_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
+		vosel, vosel_mask, voselon, vosel_ctrl)			\
+[MT6332_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6332_volt_range_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6332_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = (max - min)/step + 1,			\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(0),					\
+	},								\
+	.qi = BIT(13),							\
+	.vselon_reg = voselon,						\
+	.vselctrl_reg = vosel_ctrl,					\
+	.vselctrl_mask = BIT(1),					\
+	.status_mask = 0,						\
+}
+
+#define MT6332_LDO_LINEAR(match, vreg, min, max, step, volt_ranges,	\
+			  enreg, vosel, vosel_mask, voselon, vosel_ctrl)\
+[MT6332_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6332_volt_range_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6332_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = (max - min)/step + 1,			\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(0),					\
+	},								\
+	.qi = BIT(15),							\
+	.vselon_reg = voselon,						\
+	.vselctrl_reg = vosel_ctrl,					\
+	.vselctrl_mask = BIT(1),					\
+	.status_mask = 0,						\
+}
+
+#define MT6332_LDO_AO(match, vreg, ldo_volt_table, vosel, vosel_mask)	\
+[MT6332_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6332_volt_table_ao_ops,			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6332_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+	},								\
+}
+
+#define MT6332_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
+		vosel_mask, _modeset_reg, _modeset_mask)		\
+[MT6332_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6332_volt_table_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6332_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+	.status_mask = 0,						\
+}
+
+#define MT6332_REG_FIXED(match, vreg, enreg, enbit, qibit, volt,	\
+			 stabit, _modeset_reg, _modeset_mask)		\
+[MT6332_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6332_volt_fixed_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6332_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = 1,					\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+		.min_uV = volt,						\
+	},								\
+	.qi = BIT(qibit),						\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+	.status_reg = MT6332_EN_STATUS0,				\
+	.status_mask = BIT(stabit),					\
+}
+
+static const struct linear_range boost_volt_range[] = {
+	REGULATOR_LINEAR_RANGE(3500000, 0, 0x7f, 31250),
+};
+
+static const struct linear_range buck_volt_range[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
+};
+
+static const struct linear_range buck_pa_volt_range[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
+};
+
+static const struct linear_range buck_rf_volt_range[] = {
+	REGULATOR_LINEAR_RANGE(1050000, 0, 0x7f, 9375),
+};
+
+static const unsigned int ldo_volt_table1[] = {
+	2800000, 3000000, 0, 3200000
+};
+
+static const unsigned int ldo_volt_table2[] = {
+	1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000,
+};
+
+static int mt6332_get_status(struct regulator_dev *rdev)
+{
+	struct mt6332_regulator_info *info = rdev_get_drvdata(rdev);
+	u32 reg, en_mask, regval;
+	int ret;
+
+	if (info->qi > 0) {
+		reg = info->desc.enable_reg;
+		en_mask = info->qi;
+	} else {
+		reg = info->status_reg;
+		en_mask = info->status_mask;
+	}
+
+	ret = regmap_read(rdev->regmap, reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	return (regval & en_mask) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6332_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	int ret, val = 0;
+	struct mt6332_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	switch (mode) {
+	case REGULATOR_MODE_STANDBY:
+		val = MT6332_LDO_MODE_LP;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6332_LDO_MODE_NORMAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val <<= ffs(info->modeset_mask) - 1;
+
+	ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+				  info->modeset_mask, val);
+
+	return ret;
+}
+
+static unsigned int mt6332_ldo_get_mode(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	unsigned int mode;
+	int ret;
+	struct mt6332_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= info->modeset_mask;
+	val >>= ffs(info->modeset_mask) - 1;
+
+	if (val & 0x1)
+		mode = REGULATOR_MODE_STANDBY;
+	else
+		mode = REGULATOR_MODE_NORMAL;
+
+	return mode;
+}
+
+static const struct regulator_ops mt6332_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6332_get_status,
+};
+
+static const struct regulator_ops mt6332_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6332_get_status,
+	.set_mode = mt6332_ldo_set_mode,
+	.get_mode = mt6332_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6332_volt_table_ao_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.set_mode = mt6332_ldo_set_mode,
+	.get_mode = mt6332_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6332_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6332_get_status,
+	.set_mode = mt6332_ldo_set_mode,
+	.get_mode = mt6332_ldo_get_mode,
+};
+
+/* The array is indexed by id(MT6332_ID_XXX) */
+static struct mt6332_regulator_info mt6332_regulators[] = {
+	MT6332_BUCK("buck-vdram", VDRAM, 700000, 1493750, 6250, buck_volt_range,
+		    MT6332_EN_STATUS0, MT6332_VDRAM_CON11, GENMASK(6, 0),
+		    MT6332_VDRAM_CON12, MT6332_VDRAM_CON7),
+	MT6332_BUCK("buck-vdvfs2", VDVFS2, 700000, 1312500, 6250, buck_volt_range,
+		    MT6332_VDVFS2_CON9, MT6332_VDVFS2_CON11, GENMASK(6, 0),
+		    MT6332_VDVFS2_CON12, MT6332_VDVFS2_CON7),
+	MT6332_BUCK("buck-vpa", VPA, 500000, 3400000, 50000, buck_pa_volt_range,
+		    MT6332_VPA_CON9, MT6332_VPA_CON11, GENMASK(5, 0),
+		    MT6332_VPA_CON12, MT6332_VPA_CON7),
+	MT6332_BUCK("buck-vrf18a", VRF1, 1050000, 2240625, 9375, buck_rf_volt_range,
+		    MT6332_VRF1_CON9, MT6332_VRF1_CON11, GENMASK(6, 0),
+		    MT6332_VRF1_CON12, MT6332_VRF1_CON7),
+	MT6332_BUCK("buck-vrf18b", VRF2, 1050000, 2240625, 9375, buck_rf_volt_range,
+		    MT6332_VRF2_CON9, MT6332_VRF2_CON11, GENMASK(6, 0),
+		    MT6332_VRF2_CON12, MT6332_VRF2_CON7),
+	MT6332_BUCK("buck-vsbst", VSBST, 3500000, 7468750, 31250, boost_volt_range,
+		    MT6332_VSBST_CON8, MT6332_VSBST_CON12, GENMASK(6, 0),
+		    MT6332_VSBST_CON13, MT6332_VSBST_CON8),
+	MT6332_LDO("ldo-vauxb32", VAUXB32, ldo_volt_table1, MT6332_LDO_CON1, 10,
+		   MT6332_LDO_CON9, GENMASK(6, 5), MT6332_LDO_CON1, GENMASK(1, 0)),
+	MT6332_REG_FIXED("ldo-vbif28", VBIF28, MT6332_LDO_CON2, 10, 0, 2800000, 1, 0, 0),
+	MT6332_REG_FIXED("ldo-vusb33", VUSB33, MT6332_LDO_CON3, 10, 0, 3300000, 2, 0, 0),
+	MT6332_LDO_LINEAR("ldo-vsram", VSRAM_DVFS2, 700000, 1493750, 6250, buck_volt_range,
+			  MT6332_EN_STATUS0, MT6332_LDO_CON8, GENMASK(15, 9),
+			  MT6332_VDVFS2_CON23, MT6332_VDVFS2_CON22),
+	MT6332_LDO_AO("ldo-vdig18", VDIG18, ldo_volt_table2, MT6332_LDO_CON12, GENMASK(11, 9)),
+};
+
+static int mt6332_set_buck_vosel_reg(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6332 = dev_get_drvdata(pdev->dev.parent);
+	int i;
+	u32 regval;
+
+	for (i = 0; i < MT6332_ID_VREG_MAX; i++) {
+		if (mt6332_regulators[i].vselctrl_reg) {
+			if (regmap_read(mt6332->regmap,
+				mt6332_regulators[i].vselctrl_reg,
+				&regval) < 0) {
+				dev_err(&pdev->dev,
+					"Failed to read buck ctrl\n");
+				return -EIO;
+			}
+
+			if (regval & mt6332_regulators[i].vselctrl_mask) {
+				mt6332_regulators[i].desc.vsel_reg =
+				mt6332_regulators[i].vselon_reg;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int mt6332_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6332 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+	u32 reg_value;
+
+	/* Query buck controller to select activated voltage register part */
+	if (mt6332_set_buck_vosel_reg(pdev))
+		return -EIO;
+
+	/* Read PMIC chip revision to update constraints and voltage table */
+	if (regmap_read(mt6332->regmap, MT6332_HWCID, &reg_value) < 0) {
+		dev_err(&pdev->dev, "Failed to read Chip ID\n");
+		return -EIO;
+	}
+	reg_value &= GENMASK(7, 0);
+
+	dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value);
+
+	/*
+	 * ChipID 0x10 is "MT6332 E1", has a different voltage table and
+	 * it's currently not supported in this driver. Upon detection of
+	 * this ID, refuse to register the regulators, as we will wrongly
+	 * interpret the VSEL for this revision, potentially overvolting
+	 * some device.
+	 */
+	if (reg_value == 0x10) {
+		dev_err(&pdev->dev, "Chip version not supported. Bailing out.\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < MT6332_ID_VREG_MAX; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6332_regulators[i];
+		config.regmap = mt6332->regmap;
+		rdev = devm_regulator_register(&pdev->dev,
+				&mt6332_regulators[i].desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6332_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static const struct platform_device_id mt6332_platform_ids[] = {
+	{"mt6332-regulator", 0},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6332_platform_ids);
+
+static struct platform_driver mt6332_regulator_driver = {
+	.driver = {
+		.name = "mt6332-regulator",
+	},
+	.probe = mt6332_regulator_probe,
+	.id_table = mt6332_platform_ids,
+};
+
+module_platform_driver(mt6332_regulator_driver);
+
+MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6332 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/mt6332-regulator.h b/include/linux/regulator/mt6332-regulator.h
new file mode 100644
index 000000000000..af5e3ed31029
--- /dev/null
+++ b/include/linux/regulator/mt6332-regulator.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#ifndef __LINUX_REGULATOR_MT6332_H
+#define __LINUX_REGULATOR_MT6332_H
+
+enum {
+	/* BUCK */
+	MT6332_ID_VDRAM = 0,
+	MT6332_ID_VDVFS2,
+	MT6332_ID_VPA,
+	MT6332_ID_VRF1,
+	MT6332_ID_VRF2,
+	MT6332_ID_VSBST,
+	/* LDO */
+	MT6332_ID_VAUXB32,
+	MT6332_ID_VBIF28,
+	MT6332_ID_VDIG18,
+	MT6332_ID_VSRAM_DVFS2,
+	MT6332_ID_VUSB33,
+	MT6332_ID_VREG_MAX
+};
+
+#endif /* __LINUX_REGULATOR_MT6332_H */
-- 
2.35.1

Re: [PATCH 2/4] regulator: Add driver for MT6331 PMIC regulators

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1477 bytes --]

On Fri, May 20, 2022 at 03:33:03PM +0200, AngeloGioacchino Del Regno wrote:

> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 Collabora Ltd.
> + * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> + *

Please make the entire comment a C++ one so things look more
intentional.

> +static const unsigned int ldo_volt_table10[] = {
> +	1200000, 1300000, 1500000, 1800000,
> +	1200000, 1300000, 1500000, 1800000,
> +	1200000, 1300000, 1500000, 1800000,
> +	1200000, 1300000, 1500000, 1800000,
> +};

So the top bits of the voltate selection field just get ignored?  Might
be easier to just write the code to not include the top bits.

> +static int mt6331_get_status(struct regulator_dev *rdev)
> +{
> +	struct mt6331_regulator_info *info = rdev_get_drvdata(rdev);
> +	u32 reg, en_mask, regval;
> +	int ret;
> +
> +	if (info->qi > 0) {
> +		reg = info->desc.enable_reg;
> +		en_mask = info->qi;

If the regulator doesn't have status readback it shouldn't provide a
get_status() operation.

> +static int mt6331_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
> +{
> +	int ret, val = 0;
> +	struct mt6331_regulator_info *info = rdev_get_drvdata(rdev);
> +
> +	if (!info->modeset_mask) {
> +		dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n",
> +			info->desc.name);
> +		return -EINVAL;
> +	}

Just don't provide the operation for these regulators then.  That'll
mean a separate ops struct but that's fine.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 1/4] dt-bindings: regulator: Add bindings for MT6331 regulator

[Krzysztof Kozlowski]

On 20/05/2022 15:33, AngeloGioacchino Del Regno wrote:
> Add the bindings for the regulators found in the MT6331 PMIC.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  .../bindings/regulator/mt6331-regulator.yaml  | 272 ++++++++++++++++++
>  1 file changed, 272 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/mt6331-regulator.yaml
> 
> diff --git a/Documentation/devicetree/bindings/regulator/mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6331-regulator.yaml
> new file mode 100644
> index 000000000000..333c74cdbcbe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/mt6331-regulator.yaml

mediatek,mt6331-regulator.yaml

> @@ -0,0 +1,272 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/mt6331-regulator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MT6331 Regulator from MediaTek Integrated
> +
> +maintainers:
> +  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> +
> +description: |
> +  List of regulators provided by this controller. 

I don't understand this sentence in the description.

> It is named
> +  according to its regulator type, buck_<name> and ldo_<name>.
> +  MT6331 regulators node should be sub node of the MT6397 MFD node.
> +


Best regards,
Krzysztof

Re: [PATCH 3/4] dt-bindings: regulator: Add bindings for MT6332 regulator

[Krzysztof Kozlowski]

On 20/05/2022 15:33, AngeloGioacchino Del Regno wrote:
> Add devicetree bindings for the regulators found in the MT6332 PMIC.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  .../bindings/regulator/mt6332-regulator.yaml  | 111 ++++++++++++++++++
>  1 file changed, 111 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/mt6332-regulator.yaml
> 
> diff --git a/Documentation/devicetree/bindings/regulator/mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6332-regulator.yaml
> new file mode 100644
> index 000000000000..51077a865dbe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/mt6332-regulator.yaml

Same comments as your other patch,

> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/mt6332-regulator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MT6332 Regulator from MediaTek Integrated
> +
> +maintainers:
> +  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> +
> +description: |
> +  List of regulators provided by this controller. It is named


Best regards,
Krzysztof

Re: [PATCH 2/4] regulator: Add driver for MT6331 PMIC regulators

[AngeloGioacchino Del Regno]

Il 20/05/22 16:45, Mark Brown ha scritto:
> On Fri, May 20, 2022 at 03:33:03PM +0200, AngeloGioacchino Del Regno wrote:
> 
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2022 Collabora Ltd.
>> + * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
>> + *
> 
> Please make the entire comment a C++ one so things look more
> intentional.
> 

Will do.

>> +static const unsigned int ldo_volt_table10[] = {
>> +	1200000, 1300000, 1500000, 1800000,
>> +	1200000, 1300000, 1500000, 1800000,
>> +	1200000, 1300000, 1500000, 1800000,
>> +	1200000, 1300000, 1500000, 1800000,
>> +};
> 
> So the top bits of the voltate selection field just get ignored?  Might
> be easier to just write the code to not include the top bits.
> 

No, they're all valid values for real... but I guess that I can simplify
this voltage table by simply modifying the bitmask that we use for the
regulators that are using this table....

Example:

MT6331_LDO_S("ldo-vcamio", VCAM_IO,  ldo_volt_table10, MT6331_SYSLDO_CON3, 10,

	MT6331_SYSLDO_CON11, GENMASK(6, 3), MT6331_SYSLDO_CON3, GENMASK(1, 0),

	MT6331_EN_STATUS1, BIT(13)),

So for VCAM_IO it's CON11... we have VGP2, VGP3 using CON14, CON15, then there
are no more users for this table.
If I use GENMASK(4, 3), I can effectively leave only four voltage values in
ldo_volt_table10.

Also, I've just noticed a mistake on ldo-vmipi: that's supposed to have a mask
of GENMASK(5, 3), not (6, 3) - which is in turn also making me able to remove
the ldo_volt_table_3a.

Alright, will fix in the next one :))

>> +static int mt6331_get_status(struct regulator_dev *rdev)
>> +{
>> +	struct mt6331_regulator_info *info = rdev_get_drvdata(rdev);
>> +	u32 reg, en_mask, regval;
>> +	int ret;
>> +
>> +	if (info->qi > 0) {
>> +		reg = info->desc.enable_reg;
>> +		en_mask = info->qi;
> 
> If the regulator doesn't have status readback it shouldn't provide a
> get_status() operation.
> 

What I've understood is that when there's no "QI" flag, the enable register
will provide the regulator status (EN/DIS) acting like QI, that's why I've
added that if branch...

Anyway, I'll recheck this part before sending the next version!

>> +static int mt6331_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
>> +{
>> +	int ret, val = 0;
>> +	struct mt6331_regulator_info *info = rdev_get_drvdata(rdev);
>> +
>> +	if (!info->modeset_mask) {
>> +		dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n",
>> +			info->desc.name);
>> +		return -EINVAL;
>> +	}
> 
> Just don't provide the operation for these regulators then.  That'll
> mean a separate ops struct but that's fine.

Oki, I'll add new ops then.

Thanks for the review!
P.S.: I'll obviously apply the same suggestions on mt6332-regulator as well.

Cheers,
Angelo

Re: [PATCH 2/4] regulator: Add driver for MT6331 PMIC regulators

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1621 bytes --]

On Mon, May 23, 2022 at 02:49:19PM +0200, AngeloGioacchino Del Regno wrote:
> Il 20/05/22 16:45, Mark Brown ha scritto:
> > On Fri, May 20, 2022 at 03:33:03PM +0200, AngeloGioacchino Del Regno wrote:

> > > +static const unsigned int ldo_volt_table10[] = {
> > > +	1200000, 1300000, 1500000, 1800000,
> > > +	1200000, 1300000, 1500000, 1800000,
> > > +	1200000, 1300000, 1500000, 1800000,
> > > +	1200000, 1300000, 1500000, 1800000,
> > > +};

> > So the top bits of the voltate selection field just get ignored?  Might
> > be easier to just write the code to not include the top bits.
> > 

> No, they're all valid values for real... but I guess that I can simplify
> this voltage table by simply modifying the bitmask that we use for the
> regulators that are using this table....

Right, my point here is that it looks awfully like the documentation
(this came from documentation I guess?) is including some extra bits
that get ignored in the voltage selection field here.  That seems like a
weird choice somewhere along the line.

> > > +	if (info->qi > 0) {
> > > +		reg = info->desc.enable_reg;
> > > +		en_mask = info->qi;

> > If the regulator doesn't have status readback it shouldn't provide a
> > get_status() operation.

> What I've understood is that when there's no "QI" flag, the enable register
> will provide the regulator status (EN/DIS) acting like QI, that's why I've
> added that if branch...

> Anyway, I'll recheck this part before sending the next version!

That would be fairly unusual, often a regulator won't even detect when
it's gone out of regulation.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 2/4] regulator: Add driver for MT6331 PMIC regulators

[AngeloGioacchino Del Regno]

Il 23/05/22 15:00, Mark Brown ha scritto:
> On Mon, May 23, 2022 at 02:49:19PM +0200, AngeloGioacchino Del Regno wrote:
>> Il 20/05/22 16:45, Mark Brown ha scritto:
>>> On Fri, May 20, 2022 at 03:33:03PM +0200, AngeloGioacchino Del Regno wrote:
> 
>>>> +static const unsigned int ldo_volt_table10[] = {
>>>> +	1200000, 1300000, 1500000, 1800000,
>>>> +	1200000, 1300000, 1500000, 1800000,
>>>> +	1200000, 1300000, 1500000, 1800000,
>>>> +	1200000, 1300000, 1500000, 1800000,
>>>> +};
> 
>>> So the top bits of the voltate selection field just get ignored?  Might
>>> be easier to just write the code to not include the top bits.
>>>
> 
>> No, they're all valid values for real... but I guess that I can simplify
>> this voltage table by simply modifying the bitmask that we use for the
>> regulators that are using this table....
> 
> Right, my point here is that it looks awfully like the documentation
> (this came from documentation I guess?) is including some extra bits
> that get ignored in the voltage selection field here.  That seems like a
> weird choice somewhere along the line.
> 

I wish I had a datasheet for these parts...

All of this comes from analyzing a running device on the downstream 3.4 kernel
and on understanding the (not really readable) downstream kernel code...
..but yes, I agree on the fact that this seems to be a weird choice.

Ah, besides, I hooked up an oscilloscope to the VCAM_IO and I can see that the
vreg really does react as expected upon setting the upper bits.. but since it
still works without, we can safely ignore them, which makes us able to simplify
the driver (as no custom code for that will be required) and, at the same time,
avoid seeing a table of values repeated 4 times in a row.

>>>> +	if (info->qi > 0) {
>>>> +		reg = info->desc.enable_reg;
>>>> +		en_mask = info->qi;
> 
>>> If the regulator doesn't have status readback it shouldn't provide a
>>> get_status() operation.
> 
>> What I've understood is that when there's no "QI" flag, the enable register
>> will provide the regulator status (EN/DIS) acting like QI, that's why I've
>> added that if branch...
> 
>> Anyway, I'll recheck this part before sending the next version!
> 
> That would be fairly unusual, often a regulator won't even detect when
> it's gone out of regulation.

Actually, there *is* support for this kind of detection... luckily the registers
and masks/bits are all dumped in a "upmu_hw.h" header downstream, regardless of
whether they're used or not in the code, so at least there's that reference to
look at... and I can see that there are bits to manage the overcurrent protection
(OVP) and configurable (OCPLVL) overcurrent protection (OCP_EN / OC_EN)...

...so, the regulator will indeed shut itself off and clear either/both the QI_EN
and/or its relative bit in the enable register... I've also just found hints of
the latter (enable register being set to 0) downstream, so I'm sure that this is
indeed right.

And finally... I would really like to test the OCP/OVP features to write some
code managing that, but I'm using a production smartphone (a Xperia M5, like
mentioned in the cover letter) for research and testing and you surely understand
that it's not time yet to take this risk... I will, later - but I have to finish
the upstreaming of this SoC and platform before chasing the green smoke... :-)

Re: [PATCH 2/4] regulator: Add driver for MT6331 PMIC regulators

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1758 bytes --]

On Mon, May 23, 2022 at 03:22:39PM +0200, AngeloGioacchino Del Regno wrote:
> Il 23/05/22 15:00, Mark Brown ha scritto:

> > Right, my point here is that it looks awfully like the documentation
> > (this came from documentation I guess?) is including some extra bits
> > that get ignored in the voltage selection field here.  That seems like a
> > weird choice somewhere along the line.

> I wish I had a datasheet for these parts...

> All of this comes from analyzing a running device on the downstream 3.4 kernel
> and on understanding the (not really readable) downstream kernel code...
> ..but yes, I agree on the fact that this seems to be a weird choice.

> Ah, besides, I hooked up an oscilloscope to the VCAM_IO and I can see that the
> vreg really does react as expected upon setting the upper bits.. but since it
> still works without, we can safely ignore them, which makes us able to simplify
> the driver (as no custom code for that will be required) and, at the same time,
> avoid seeing a table of values repeated 4 times in a row.

That seems safer in general if we don't know what those bits are doing -
it could be some kind of mode control or something.

> ...so, the regulator will indeed shut itself off and clear either/both the QI_EN
> and/or its relative bit in the enable register... I've also just found hints of
> the latter (enable register being set to 0) downstream, so I'm sure that this is
> indeed right.

That's still not quite the same thing as a status bit, if the regulator
disables itself then it won't try to turn itself back on.  Note that the
core will fall back on using the enable state if there's no status op so
there's no need for this logic, you can just omit the status op and the
behaviour will be the same.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 2/4] regulator: Add driver for MT6331 PMIC regulators

[AngeloGioacchino Del Regno]

Il 23/05/22 15:43, Mark Brown ha scritto:
> On Mon, May 23, 2022 at 03:22:39PM +0200, AngeloGioacchino Del Regno wrote:
>> Il 23/05/22 15:00, Mark Brown ha scritto:
> 
>>> Right, my point here is that it looks awfully like the documentation
>>> (this came from documentation I guess?) is including some extra bits
>>> that get ignored in the voltage selection field here.  That seems like a
>>> weird choice somewhere along the line.
> 
>> I wish I had a datasheet for these parts...
> 
>> All of this comes from analyzing a running device on the downstream 3.4 kernel
>> and on understanding the (not really readable) downstream kernel code...
>> ..but yes, I agree on the fact that this seems to be a weird choice.
> 
>> Ah, besides, I hooked up an oscilloscope to the VCAM_IO and I can see that the
>> vreg really does react as expected upon setting the upper bits.. but since it
>> still works without, we can safely ignore them, which makes us able to simplify
>> the driver (as no custom code for that will be required) and, at the same time,
>> avoid seeing a table of values repeated 4 times in a row.
> 
> That seems safer in general if we don't know what those bits are doing -
> it could be some kind of mode control or something.
> 
>> ...so, the regulator will indeed shut itself off and clear either/both the QI_EN
>> and/or its relative bit in the enable register... I've also just found hints of
>> the latter (enable register being set to 0) downstream, so I'm sure that this is
>> indeed right.
> 
> That's still not quite the same thing as a status bit, if the regulator
> disables itself then it won't try to turn itself back on.  Note that the
> core will fall back on using the enable state if there's no status op so
> there's no need for this logic, you can just omit the status op and the
> behaviour will be the same.

Ok then, I'll simply remove that!

Thanks,
Angelo