From: Luca Weiss <luca.weiss@fairphone.com>
To: linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org,
Luca Weiss <luca.weiss@fairphone.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Georgi Djakov <djakov@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/5] dt-bindings: interconnect: Add Qualcomm SM6350 NoC support
Date: Wed, 25 May 2022 16:43:59 +0200 [thread overview]
Message-ID: <20220525144404.200390-4-luca.weiss@fairphone.com> (raw)
In-Reply-To: <20220525144404.200390-1-luca.weiss@fairphone.com>
Add bindings for Qualcomm SM6350 Network-On-Chip interconnect devices.
As SM6350 has two pairs of NoCs sharing the same reg, allow this in the
binding documentation, as was done for qcm2290.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Changes since v2:
* Put requires and unevaluatedProperties further down
.../interconnect/qcom,sm6350-rpmh.yaml | 82 ++++++++++
.../dt-bindings/interconnect/qcom,sm6350.h | 148 ++++++++++++++++++
2 files changed, 230 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
create mode 100644 include/dt-bindings/interconnect/qcom,sm6350.h
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
new file mode 100644
index 000000000000..3e3ea85b4792
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm6350-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 RPMh Network-On-Chip Interconnect
+
+maintainers:
+ - Luca Weiss <luca.weiss@fairphone.com>
+
+description: |
+ Qualcomm RPMh-based interconnect provider on SM6350.
+
+allOf:
+ - $ref: qcom,rpmh-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,sm6350-aggre1-noc
+ - qcom,sm6350-aggre2-noc
+ - qcom,sm6350-config-noc
+ - qcom,sm6350-dc-noc
+ - qcom,sm6350-gem-noc
+ - qcom,sm6350-mmss-noc
+ - qcom,sm6350-npu-noc
+ - qcom,sm6350-system-noc
+
+ reg:
+ maxItems: 1
+
+ '#interconnect-cells': true
+
+patternProperties:
+ '^interconnect-[a-z0-9\-]+$':
+ type: object
+ description:
+ The interconnect providers do not have a separate QoS register space,
+ but share parent's space.
+ $ref: qcom,rpmh-common.yaml#
+
+ properties:
+ compatible:
+ enum:
+ - qcom,sm6350-clk-virt
+ - qcom,sm6350-compute-noc
+
+ '#interconnect-cells': true
+
+ required:
+ - compatible
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ config_noc: interconnect@1500000 {
+ compatible = "qcom,sm6350-config-noc";
+ reg = <0x01500000 0x28000>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1620000 {
+ compatible = "qcom,sm6350-system-noc";
+ reg = <0x01620000 0x17080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ clk_virt: interconnect-clk-virt {
+ compatible = "qcom,sm6350-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+ };
diff --git a/include/dt-bindings/interconnect/qcom,sm6350.h b/include/dt-bindings/interconnect/qcom,sm6350.h
new file mode 100644
index 000000000000..e662cede9aaa
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,sm6350.h
@@ -0,0 +1,148 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/*
+ * Qualcomm SM6350 interconnect IDs
+ *
+ * Copyright (C) 2022 Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SM6350_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_SM6350_H
+
+#define MASTER_A1NOC_CFG 0
+#define MASTER_QUP_0 1
+#define MASTER_EMMC 2
+#define MASTER_UFS_MEM 3
+#define A1NOC_SNOC_SLV 4
+#define SLAVE_SERVICE_A1NOC 5
+
+#define MASTER_A2NOC_CFG 0
+#define MASTER_QDSS_BAM 1
+#define MASTER_QUP_1 2
+#define MASTER_CRYPTO_CORE_0 3
+#define MASTER_IPA 4
+#define MASTER_QDSS_ETR 5
+#define MASTER_SDCC_2 6
+#define MASTER_USB3 7
+#define A2NOC_SNOC_SLV 8
+#define SLAVE_SERVICE_A2NOC 9
+
+#define MASTER_CAMNOC_HF0_UNCOMP 0
+#define MASTER_CAMNOC_ICP_UNCOMP 1
+#define MASTER_CAMNOC_SF_UNCOMP 2
+#define MASTER_QUP_CORE_0 3
+#define MASTER_QUP_CORE_1 4
+#define MASTER_LLCC 5
+#define SLAVE_CAMNOC_UNCOMP 6
+#define SLAVE_QUP_CORE_0 7
+#define SLAVE_QUP_CORE_1 8
+#define SLAVE_EBI_CH0 9
+
+#define MASTER_NPU 0
+#define MASTER_NPU_PROC 1
+#define SLAVE_CDSP_GEM_NOC 2
+
+#define SNOC_CNOC_MAS 0
+#define MASTER_QDSS_DAP 1
+#define SLAVE_A1NOC_CFG 2
+#define SLAVE_A2NOC_CFG 3
+#define SLAVE_AHB2PHY 4
+#define SLAVE_AHB2PHY_2 5
+#define SLAVE_AOSS 6
+#define SLAVE_BOOT_ROM 7
+#define SLAVE_CAMERA_CFG 8
+#define SLAVE_CAMERA_NRT_THROTTLE_CFG 9
+#define SLAVE_CAMERA_RT_THROTTLE_CFG 10
+#define SLAVE_CLK_CTL 11
+#define SLAVE_RBCPR_CX_CFG 12
+#define SLAVE_RBCPR_MX_CFG 13
+#define SLAVE_CRYPTO_0_CFG 14
+#define SLAVE_DCC_CFG 15
+#define SLAVE_CNOC_DDRSS 16
+#define SLAVE_DISPLAY_CFG 17
+#define SLAVE_DISPLAY_THROTTLE_CFG 18
+#define SLAVE_EMMC_CFG 19
+#define SLAVE_GLM 20
+#define SLAVE_GRAPHICS_3D_CFG 21
+#define SLAVE_IMEM_CFG 22
+#define SLAVE_IPA_CFG 23
+#define SLAVE_CNOC_MNOC_CFG 24
+#define SLAVE_CNOC_MSS 25
+#define SLAVE_NPU_CFG 26
+#define SLAVE_PDM 27
+#define SLAVE_PIMEM_CFG 28
+#define SLAVE_PRNG 29
+#define SLAVE_QDSS_CFG 30
+#define SLAVE_QM_CFG 31
+#define SLAVE_QM_MPU_CFG 32
+#define SLAVE_QUP_0 33
+#define SLAVE_QUP_1 34
+#define SLAVE_SDCC_2 35
+#define SLAVE_SECURITY 36
+#define SLAVE_SNOC_CFG 37
+#define SLAVE_TCSR 38
+#define SLAVE_UFS_MEM_CFG 39
+#define SLAVE_USB3 40
+#define SLAVE_VENUS_CFG 41
+#define SLAVE_VENUS_THROTTLE_CFG 42
+#define SLAVE_VSENSE_CTRL_CFG 43
+#define SLAVE_SERVICE_CNOC 44
+
+#define MASTER_CNOC_DC_NOC 0
+#define SLAVE_GEM_NOC_CFG 1
+#define SLAVE_LLCC_CFG 2
+
+#define MASTER_AMPSS_M0 0
+#define MASTER_SYS_TCU 1
+#define MASTER_GEM_NOC_CFG 2
+#define MASTER_COMPUTE_NOC 3
+#define MASTER_MNOC_HF_MEM_NOC 4
+#define MASTER_MNOC_SF_MEM_NOC 5
+#define MASTER_SNOC_GC_MEM_NOC 6
+#define MASTER_SNOC_SF_MEM_NOC 7
+#define MASTER_GRAPHICS_3D 8
+#define SLAVE_MCDMA_MS_MPU_CFG 9
+#define SLAVE_MSS_PROC_MS_MPU_CFG 10
+#define SLAVE_GEM_NOC_SNOC 11
+#define SLAVE_LLCC 12
+#define SLAVE_SERVICE_GEM_NOC 13
+
+#define MASTER_CNOC_MNOC_CFG 0
+#define MASTER_VIDEO_P0 1
+#define MASTER_VIDEO_PROC 2
+#define MASTER_CAMNOC_HF 3
+#define MASTER_CAMNOC_ICP 4
+#define MASTER_CAMNOC_SF 5
+#define MASTER_MDP_PORT0 6
+#define SLAVE_MNOC_HF_MEM_NOC 7
+#define SLAVE_MNOC_SF_MEM_NOC 8
+#define SLAVE_SERVICE_MNOC 9
+
+#define MASTER_NPU_SYS 0
+#define MASTER_NPU_NOC_CFG 1
+#define SLAVE_NPU_CAL_DP0 2
+#define SLAVE_NPU_CP 3
+#define SLAVE_NPU_INT_DMA_BWMON_CFG 4
+#define SLAVE_NPU_DPM 5
+#define SLAVE_ISENSE_CFG 6
+#define SLAVE_NPU_LLM_CFG 7
+#define SLAVE_NPU_TCM 8
+#define SLAVE_NPU_COMPUTE_NOC 9
+#define SLAVE_SERVICE_NPU_NOC 10
+
+#define MASTER_SNOC_CFG 0
+#define A1NOC_SNOC_MAS 1
+#define A2NOC_SNOC_MAS 2
+#define MASTER_GEM_NOC_SNOC 3
+#define MASTER_PIMEM 4
+#define MASTER_GIC 5
+#define SLAVE_APPSS 6
+#define SNOC_CNOC_SLV 7
+#define SLAVE_SNOC_GEM_NOC_GC 8
+#define SLAVE_SNOC_GEM_NOC_SF 9
+#define SLAVE_OCIMEM 10
+#define SLAVE_PIMEM 11
+#define SLAVE_SERVICE_SNOC 12
+#define SLAVE_QDSS_STM 13
+#define SLAVE_TCU 14
+
+#endif
--
2.36.1
next prev parent reply other threads:[~2022-05-25 14:45 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-25 14:43 [PATCH v3 0/5] Add interconnect support for SM6350 Luca Weiss
2022-05-25 14:43 ` [PATCH v3 1/5] interconnect: qcom: icc-rpmh: Support child NoC device probe Luca Weiss
2022-05-25 14:43 ` [PATCH v3 2/5] dt-bindings: interconnect: qcom: Split out rpmh-common bindings Luca Weiss
2022-05-26 12:34 ` Krzysztof Kozlowski
2022-05-25 14:43 ` Luca Weiss [this message]
2022-05-26 12:36 ` [PATCH v3 3/5] dt-bindings: interconnect: Add Qualcomm SM6350 NoC support Krzysztof Kozlowski
2022-05-25 14:44 ` [PATCH v3 4/5] interconnect: qcom: Add SM6350 driver support Luca Weiss
2022-05-25 14:44 ` [PATCH v3 5/5] arm64: dts: qcom: sm6350: Add interconnect support Luca Weiss
2022-07-18 7:58 ` Georgi Djakov
2022-07-18 9:46 ` Luca Weiss
2022-08-12 12:09 ` Luca Weiss
2022-08-12 13:34 ` Krzysztof Kozlowski
2022-08-29 23:46 ` (subset) " Bjorn Andersson
2022-07-15 13:34 ` [PATCH v3 0/5] Add interconnect support for SM6350 Luca Weiss
2022-07-18 7:15 ` Georgi Djakov
2022-08-29 23:46 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220525144404.200390-4-luca.weiss@fairphone.com \
--to=luca.weiss@fairphone.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=djakov@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).