linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Piyush Malgujar <pmalgujar@marvell.com>
To: <linux-i2c@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <rric@kernel.org>, <wsa@kernel.org>, <sgarapati@marvell.com>,
	<cchavva@marvell.com>, Piyush Malgujar <pmalgujar@marvell.com>
Subject: [PATCH v2 2/2] drivers: i2c: thunderx: Add support for High speed mode
Date: Tue, 31 May 2022 01:19:34 -0700	[thread overview]
Message-ID: <20220531081934.29238-3-pmalgujar@marvell.com> (raw)
In-Reply-To: <20220531081934.29238-1-pmalgujar@marvell.com>

Support High speed mode clock setup for OcteonTX2 platforms.

Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
---
 drivers/i2c/busses/i2c-octeon-core.c     | 64 +++++++++++++++---------
 drivers/i2c/busses/i2c-octeon-core.h     |  3 ++
 drivers/i2c/busses/i2c-thunderx-pcidrv.c |  3 +-
 3 files changed, 46 insertions(+), 24 deletions(-)

diff --git a/drivers/i2c/busses/i2c-octeon-core.c b/drivers/i2c/busses/i2c-octeon-core.c
index 49d07a63a01f0b0711f4fa7a5d13d684935e5cbc..1588d9186b198bfe6ae78626829b3f221d51b8d9 100644
--- a/drivers/i2c/busses/i2c-octeon-core.c
+++ b/drivers/i2c/busses/i2c-octeon-core.c
@@ -608,25 +608,27 @@ int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
 	int i, ret = 0;
 
-	if (num == 1) {
-		if (msgs[0].len > 0 && msgs[0].len <= 8) {
-			if (msgs[0].flags & I2C_M_RD)
-				ret = octeon_i2c_hlc_read(i2c, msgs);
-			else
-				ret = octeon_i2c_hlc_write(i2c, msgs);
-			goto out;
-		}
-	} else if (num == 2) {
-		if ((msgs[0].flags & I2C_M_RD) == 0 &&
-		    (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
-		    msgs[0].len > 0 && msgs[0].len <= 2 &&
-		    msgs[1].len > 0 && msgs[1].len <= 8 &&
-		    msgs[0].addr == msgs[1].addr) {
-			if (msgs[1].flags & I2C_M_RD)
-				ret = octeon_i2c_hlc_comp_read(i2c, msgs);
-			else
-				ret = octeon_i2c_hlc_comp_write(i2c, msgs);
-			goto out;
+	if (IS_LS_FREQ(i2c->twsi_freq)) {
+		if (num == 1) {
+			if (msgs[0].len > 0 && msgs[0].len <= 8) {
+				if (msgs[0].flags & I2C_M_RD)
+					ret = octeon_i2c_hlc_read(i2c, msgs);
+				else
+					ret = octeon_i2c_hlc_write(i2c, msgs);
+				goto out;
+			}
+		} else if (num == 2) {
+			if ((msgs[0].flags & I2C_M_RD) == 0 &&
+			    (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
+			    msgs[0].len > 0 && msgs[0].len <= 2 &&
+			    msgs[1].len > 0 && msgs[1].len <= 8 &&
+			    msgs[0].addr == msgs[1].addr) {
+				if (msgs[1].flags & I2C_M_RD)
+					ret = octeon_i2c_hlc_comp_read(i2c, msgs);
+				else
+					ret = octeon_i2c_hlc_comp_write(i2c, msgs);
+				goto out;
+			}
 		}
 	}
 
@@ -665,10 +667,13 @@ void octeon_i2c_set_clock(struct octeon_i2c *i2c)
 	 * Find divisors to produce target frequency, start with large delta
 	 * to cover wider range of divisors, note thp = TCLK half period.
 	 */
-	int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = huge_delta;
+	int ds = 10, thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = huge_delta;
 
-	if (octeon_i2c_is_otx2(to_pci_dev(i2c->dev)))
+	if (octeon_i2c_is_otx2(to_pci_dev(i2c->dev))) {
 		thp = 0x3;
+		if (!IS_LS_FREQ(i2c->twsi_freq))
+			ds = 15;
+	}
 
 	for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
 		/*
@@ -680,7 +685,7 @@ void octeon_i2c_set_clock(struct octeon_i2c *i2c)
 			 * For given ndiv and mdiv values check the
 			 * two closest thp values.
 			 */
-			tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
+			tclk = i2c->twsi_freq * (mdiv_idx + 1) * ds;
 			tclk *= (1 << ndiv_idx);
 			if (octeon_i2c_is_otx2(to_pci_dev(i2c->dev)))
 				thp_base = (i2c->sys_freq / tclk) - 2;
@@ -698,7 +703,9 @@ void octeon_i2c_set_clock(struct octeon_i2c *i2c)
 					foscl = i2c->sys_freq /
 						(2 * (thp_idx + 1));
 				foscl = foscl / (1 << ndiv_idx);
-				foscl = foscl / (mdiv_idx + 1) / 10;
+				foscl = foscl / (mdiv_idx + 1) / ds;
+				if (foscl > i2c->twsi_freq)
+					continue;
 				diff = abs(foscl - i2c->twsi_freq);
 				/* Use it if smaller diff from target */
 				if (diff < delta_hz) {
@@ -712,6 +719,17 @@ void octeon_i2c_set_clock(struct octeon_i2c *i2c)
 	}
 	octeon_i2c_reg_write(i2c, SW_TWSI_OP_TWSI_CLK, thp);
 	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
+	if (octeon_i2c_is_otx2(to_pci_dev(i2c->dev))) {
+		u64 mode;
+
+		mode = __raw_readq(i2c->twsi_base + MODE(i2c));
+		/* Set REFCLK_SRC and HS_MODE in TWSX_MODE register */
+		if (!IS_LS_FREQ(i2c->twsi_freq))
+			mode |= BIT(4) | BIT(0);
+		else
+			mode &= ~(BIT(4) | BIT(0));
+		octeon_i2c_writeq_flush(mode, i2c->twsi_base + MODE(i2c));
+	}
 }
 
 int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h
index 8a0033c94a8a291fb255b0da03858274035c46f4..89d7d3bb8e30bd5787978d17d5a9b20ab0d41e22 100644
--- a/drivers/i2c/busses/i2c-octeon-core.h
+++ b/drivers/i2c/busses/i2c-octeon-core.h
@@ -93,11 +93,13 @@ struct octeon_i2c_reg_offset {
 	unsigned int sw_twsi;
 	unsigned int twsi_int;
 	unsigned int sw_twsi_ext;
+	unsigned int mode;
 };
 
 #define SW_TWSI(x)	(x->roff.sw_twsi)
 #define TWSI_INT(x)	(x->roff.twsi_int)
 #define SW_TWSI_EXT(x)	(x->roff.sw_twsi_ext)
+#define MODE(x)		(x->roff.mode)
 
 struct octeon_i2c {
 	wait_queue_head_t queue;
@@ -212,6 +214,7 @@ static inline void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
 	octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT(i2c));
 }
 
+#define IS_LS_FREQ(twsi_freq) ((twsi_freq) <= 400000)
 #define PCI_SUBSYS_DEVID_9XXX 0xB
 /**
  * octeon_i2c_is_otx2 - check for chip ID
diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
index eecd27f9f1730e522dcccafc9f12ea891a3b59ef..3dd5a4d798f99e9b5282360cf9d5840042fc8dcc 100644
--- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -165,6 +165,7 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 	i2c->roff.sw_twsi = 0x1000;
 	i2c->roff.twsi_int = 0x1010;
 	i2c->roff.sw_twsi_ext = 0x1018;
+	i2c->roff.mode = 0x1038;
 
 	i2c->dev = dev;
 	pci_set_drvdata(pdev, i2c);
@@ -209,7 +210,7 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 	 * For OcteonTX2 chips, set reference frequency to 100MHz
 	 * as refclk_src in TWSI_MODE register defaults to 100MHz.
 	 */
-	if (octeon_i2c_is_otx2(pdev))
+	if (octeon_i2c_is_otx2(pdev) && IS_LS_FREQ(i2c->twsi_freq))
 		i2c->sys_freq = 100000000;
 	octeon_i2c_set_clock(i2c);
 
-- 
2.17.1


      parent reply	other threads:[~2022-05-31  8:21 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-31  8:19 [PATCH v2 0/2] drivers: i2c: thunderx: Marvell thunderx i2c changes Piyush Malgujar
2022-05-31  8:19 ` [PATCH v2 1/2] drivers: i2c: thunderx: octeontx2 clock divisor logic changes Piyush Malgujar
2022-05-31  8:19 ` Piyush Malgujar [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220531081934.29238-3-pmalgujar@marvell.com \
    --to=pmalgujar@marvell.com \
    --cc=cchavva@marvell.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rric@kernel.org \
    --cc=sgarapati@marvell.com \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).