From: Sean Anderson <sean.anderson@seco.com>
To: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org
Cc: Madalin Bucur <madalin.bucur@nxp.com>,
linux-kernel@vger.kernel.org,
Sean Anderson <sean.anderson@seco.com>
Subject: [PATCH 3/4] net: fman: Store en/disable in mac_device instead of mac_priv_s
Date: Tue, 31 May 2022 15:58:49 -0400 [thread overview]
Message-ID: <20220531195851.1592220-4-sean.anderson@seco.com> (raw)
In-Reply-To: <20220531195851.1592220-1-sean.anderson@seco.com>
All macs use the same start/stop functions. The actual mac-specific code
lives in enable/disable. Move these functions to an appropriate struct,
and inline the phy enable/disable calls to the caller of start/stop.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
.../net/ethernet/freescale/dpaa/dpaa_eth.c | 11 +++--
drivers/net/ethernet/freescale/fman/mac.c | 44 +++----------------
drivers/net/ethernet/freescale/fman/mac.h | 4 +-
3 files changed, 15 insertions(+), 44 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 906d392da4e3..fe2572b492b2 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -288,9 +288,11 @@ static int dpaa_stop(struct net_device *net_dev)
*/
msleep(200);
- err = mac_dev->stop(mac_dev);
+ if (mac_dev->phy_dev)
+ phy_stop(mac_dev->phy_dev);
+ err = mac_dev->disable(mac_dev->fman_mac);
if (err < 0)
- netif_err(priv, ifdown, net_dev, "mac_dev->stop() = %d\n",
+ netif_err(priv, ifdown, net_dev, "mac_dev->disable() = %d\n",
err);
for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) {
@@ -2942,11 +2944,12 @@ static int dpaa_open(struct net_device *net_dev)
goto mac_start_failed;
}
- err = priv->mac_dev->start(mac_dev);
+ err = priv->mac_dev->enable(mac_dev->fman_mac);
if (err < 0) {
- netif_err(priv, ifup, net_dev, "mac_dev->start() = %d\n", err);
+ netif_err(priv, ifup, net_dev, "mac_dev->enable() = %d\n", err);
goto mac_start_failed;
}
+ phy_start(priv->mac_dev->phy_dev);
netif_tx_start_all_queues(net_dev);
diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index a8d521760ffc..6a4eaca83700 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -39,9 +39,6 @@ struct mac_priv_s {
struct fixed_phy_status *fixed_link;
u16 speed;
u16 max_speed;
-
- int (*enable)(struct fman_mac *mac_dev);
- int (*disable)(struct fman_mac *mac_dev);
};
struct mac_address {
@@ -241,29 +238,6 @@ static int memac_initialization(struct mac_device *mac_dev)
return err;
}
-static int start(struct mac_device *mac_dev)
-{
- int err;
- struct phy_device *phy_dev = mac_dev->phy_dev;
- struct mac_priv_s *priv = mac_dev->priv;
-
- err = priv->enable(mac_dev->fman_mac);
- if (!err && phy_dev)
- phy_start(phy_dev);
-
- return err;
-}
-
-static int stop(struct mac_device *mac_dev)
-{
- struct mac_priv_s *priv = mac_dev->priv;
-
- if (mac_dev->phy_dev)
- phy_stop(mac_dev->phy_dev);
-
- return priv->disable(mac_dev->fman_mac);
-}
-
static int set_multi(struct net_device *net_dev, struct mac_device *mac_dev)
{
struct mac_priv_s *priv;
@@ -454,11 +428,9 @@ static void setup_dtsec(struct mac_device *mac_dev)
mac_dev->set_allmulti = dtsec_set_allmulti;
mac_dev->set_tstamp = dtsec_set_tstamp;
mac_dev->set_multi = set_multi;
- mac_dev->start = start;
- mac_dev->stop = stop;
mac_dev->adjust_link = adjust_link_dtsec;
- mac_dev->priv->enable = dtsec_enable;
- mac_dev->priv->disable = dtsec_disable;
+ mac_dev->enable = dtsec_enable;
+ mac_dev->disable = dtsec_disable;
}
static void setup_tgec(struct mac_device *mac_dev)
@@ -474,11 +446,9 @@ static void setup_tgec(struct mac_device *mac_dev)
mac_dev->set_allmulti = tgec_set_allmulti;
mac_dev->set_tstamp = tgec_set_tstamp;
mac_dev->set_multi = set_multi;
- mac_dev->start = start;
- mac_dev->stop = stop;
mac_dev->adjust_link = adjust_link_void;
- mac_dev->priv->enable = tgec_enable;
- mac_dev->priv->disable = tgec_disable;
+ mac_dev->enable = tgec_enable;
+ mac_dev->disable = tgec_disable;
}
static void setup_memac(struct mac_device *mac_dev)
@@ -494,11 +464,9 @@ static void setup_memac(struct mac_device *mac_dev)
mac_dev->set_allmulti = memac_set_allmulti;
mac_dev->set_tstamp = memac_set_tstamp;
mac_dev->set_multi = set_multi;
- mac_dev->start = start;
- mac_dev->stop = stop;
mac_dev->adjust_link = adjust_link_memac;
- mac_dev->priv->enable = memac_enable;
- mac_dev->priv->disable = memac_disable;
+ mac_dev->enable = memac_enable;
+ mac_dev->disable = memac_disable;
}
#define DTSEC_SUPPORTED \
diff --git a/drivers/net/ethernet/freescale/fman/mac.h b/drivers/net/ethernet/freescale/fman/mac.h
index 1ea5fd32f689..4c9fdfab8813 100644
--- a/drivers/net/ethernet/freescale/fman/mac.h
+++ b/drivers/net/ethernet/freescale/fman/mac.h
@@ -36,8 +36,8 @@ struct mac_device {
bool allmulti;
int (*init)(struct mac_device *mac_dev);
- int (*start)(struct mac_device *mac_dev);
- int (*stop)(struct mac_device *mac_dev);
+ int (*enable)(struct fman_mac *mac_dev);
+ int (*disable)(struct fman_mac *mac_dev);
void (*adjust_link)(struct mac_device *mac_dev);
int (*set_promisc)(struct fman_mac *mac_dev, bool enable);
int (*change_addr)(struct fman_mac *mac_dev, enet_addr_t *enet_addr);
--
2.35.1.1320.gc452695387.dirty
next prev parent reply other threads:[~2022-05-31 19:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-31 19:58 [PATCH 0/4] net: fman: Various cleanups Sean Anderson
2022-05-31 19:58 ` [PATCH 1/4] net: fman: Convert to SPDX identifiers Sean Anderson
2022-05-31 19:58 ` [PATCH 2/4] net: fman: Don't pass comm_mode to enable/disable Sean Anderson
2022-05-31 19:58 ` Sean Anderson [this message]
2022-05-31 19:58 ` [PATCH 4/4] net: fman: dtsec: Always gracefully stop/start Sean Anderson
2022-06-01 4:36 ` [PATCH 0/4] net: fman: Various cleanups Jakub Kicinski
2022-06-07 14:25 ` Camelia Alexandra Groza
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220531195851.1592220-4-sean.anderson@seco.com \
--to=sean.anderson@seco.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=madalin.bucur@nxp.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).