From: Guodong Liu <guodong.liu@mediatek.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Sean Wang <sean.wang@kernel.org>
Cc: "Sean Wang" <sean.wang@mediatek.com>,
"Zhiyong Tao" <zhiyong.tao@mediatek.com>,
"N�colas F . R . A . Prado" <nfraprado@collabora.com>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
Project_Global_Chrome_Upstream_Group@mediatek.com,
"Guodong Liu" <guodong.liu@mediatek.com>
Subject: [PATCH v2 2/5] pinctrl: mediatek: add drive for I2C related pins on mt8192
Date: Fri, 24 Jun 2022 21:36:57 +0800 [thread overview]
Message-ID: <20220624133700.15487-3-guodong.liu@mediatek.com> (raw)
In-Reply-To: <20220624133700.15487-1-guodong.liu@mediatek.com>
This patch provides the advanced drive raw data setting version
for I2C used pins on mt8192.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
---
drivers/pinctrl/mediatek/pinctrl-mt8192.c | 96 ++++++-----------------
1 file changed, 26 insertions(+), 70 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
index 2421a12fc573..efabeb422aea 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
@@ -1259,74 +1259,32 @@ static const struct mtk_pin_field_calc mt8192_pin_r1_range[] = {
PIN_FIELD_BASE(205, 205, 8, 0x0070, 0x10, 5, 1),
};
-static const struct mtk_pin_field_calc mt8192_pin_e1e0en_range[] = {
- PIN_FIELD_BASE(118, 118, 4, 0x0040, 0x10, 0, 1),
- PIN_FIELD_BASE(119, 119, 4, 0x0040, 0x10, 18, 1),
- PIN_FIELD_BASE(120, 120, 4, 0x0040, 0x10, 15, 1),
- PIN_FIELD_BASE(121, 121, 4, 0x0050, 0x10, 3, 1),
- PIN_FIELD_BASE(122, 122, 4, 0x0040, 0x10, 12, 1),
- PIN_FIELD_BASE(123, 123, 4, 0x0050, 0x10, 0, 1),
- PIN_FIELD_BASE(124, 124, 4, 0x0040, 0x10, 9, 1),
- PIN_FIELD_BASE(125, 125, 4, 0x0040, 0x10, 27, 1),
- PIN_FIELD_BASE(139, 139, 4, 0x0040, 0x10, 6, 1),
- PIN_FIELD_BASE(140, 140, 4, 0x0040, 0x10, 24, 1),
- PIN_FIELD_BASE(141, 141, 4, 0x0040, 0x10, 3, 1),
- PIN_FIELD_BASE(142, 142, 4, 0x0040, 0x10, 21, 1),
- PIN_FIELD_BASE(160, 160, 7, 0x0030, 0x10, 0, 1),
- PIN_FIELD_BASE(161, 161, 7, 0x0030, 0x10, 3, 1),
- PIN_FIELD_BASE(200, 200, 8, 0x0010, 0x10, 3, 1),
- PIN_FIELD_BASE(201, 201, 8, 0x0010, 0x10, 9, 1),
- PIN_FIELD_BASE(202, 202, 5, 0x0020, 0x10, 0, 1),
- PIN_FIELD_BASE(203, 203, 5, 0x0020, 0x10, 3, 1),
- PIN_FIELD_BASE(204, 204, 8, 0x0010, 0x10, 0, 1),
- PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 6, 1),
-};
+static const struct mtk_pin_field_calc mt8192_pin_drv_adv_range[] = {
+ PIN_FIELD_BASE(89, 89, 2, 0x0040, 0x10, 0, 5),
+ PIN_FIELD_BASE(90, 90, 2, 0x0040, 0x10, 5, 5),
-static const struct mtk_pin_field_calc mt8192_pin_e0_range[] = {
- PIN_FIELD_BASE(118, 118, 4, 0x0040, 0x10, 1, 1),
- PIN_FIELD_BASE(119, 119, 4, 0x0040, 0x10, 19, 1),
- PIN_FIELD_BASE(120, 120, 4, 0x0040, 0x10, 16, 1),
- PIN_FIELD_BASE(121, 121, 4, 0x0050, 0x10, 4, 1),
- PIN_FIELD_BASE(122, 122, 4, 0x0040, 0x10, 13, 1),
- PIN_FIELD_BASE(123, 123, 4, 0x0050, 0x10, 1, 1),
- PIN_FIELD_BASE(124, 124, 4, 0x0040, 0x10, 10, 1),
- PIN_FIELD_BASE(125, 125, 4, 0x0040, 0x10, 28, 1),
- PIN_FIELD_BASE(139, 139, 4, 0x0040, 0x10, 7, 1),
- PIN_FIELD_BASE(140, 140, 4, 0x0040, 0x10, 25, 1),
- PIN_FIELD_BASE(141, 141, 4, 0x0040, 0x10, 4, 1),
- PIN_FIELD_BASE(142, 142, 4, 0x0040, 0x10, 22, 1),
- PIN_FIELD_BASE(160, 160, 7, 0x0030, 0x10, 1, 1),
- PIN_FIELD_BASE(161, 161, 7, 0x0030, 0x10, 4, 1),
- PIN_FIELD_BASE(200, 200, 8, 0x0010, 0x10, 4, 1),
- PIN_FIELD_BASE(201, 201, 8, 0x0010, 0x10, 10, 1),
- PIN_FIELD_BASE(202, 202, 5, 0x0020, 0x10, 1, 1),
- PIN_FIELD_BASE(203, 203, 5, 0x0020, 0x10, 4, 1),
- PIN_FIELD_BASE(204, 204, 8, 0x0010, 0x10, 1, 1),
- PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 7, 1),
+ PIN_FIELD_BASE(118, 118, 4, 0x0040, 0x10, 0, 3),
+ PIN_FIELD_BASE(119, 119, 4, 0x0040, 0x10, 18, 3),
+ PIN_FIELD_BASE(120, 120, 4, 0x0040, 0x10, 15, 3),
+ PIN_FIELD_BASE(121, 121, 4, 0x0050, 0x10, 3, 3),
+ PIN_FIELD_BASE(122, 122, 4, 0x0040, 0x10, 12, 3),
+ PIN_FIELD_BASE(123, 123, 4, 0x0050, 0x10, 0, 3),
+ PIN_FIELD_BASE(124, 124, 4, 0x0040, 0x10, 9, 3),
+ PIN_FIELD_BASE(125, 125, 4, 0x0040, 0x10, 27, 3),
+ PIN_FIELD_BASE(139, 139, 4, 0x0040, 0x10, 6, 3),
+ PIN_FIELD_BASE(140, 140, 4, 0x0040, 0x10, 24, 3),
+ PIN_FIELD_BASE(141, 141, 4, 0x0040, 0x10, 3, 3),
+ PIN_FIELD_BASE(142, 142, 4, 0x0040, 0x10, 21, 3),
+ PIN_FIELD_BASE(160, 160, 7, 0x0030, 0x10, 0, 3),
+ PIN_FIELD_BASE(161, 161, 7, 0x0030, 0x10, 3, 3),
+ PIN_FIELD_BASE(200, 200, 8, 0x0010, 0x10, 3, 3),
+ PIN_FIELD_BASE(201, 201, 8, 0x0010, 0x10, 9, 3),
+ PIN_FIELD_BASE(202, 202, 5, 0x0020, 0x10, 0, 3),
+ PIN_FIELD_BASE(203, 203, 5, 0x0020, 0x10, 3, 3),
+ PIN_FIELD_BASE(204, 204, 8, 0x0010, 0x10, 0, 3),
+ PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 6, 3),
};
-static const struct mtk_pin_field_calc mt8192_pin_e1_range[] = {
- PIN_FIELD_BASE(118, 118, 4, 0x0040, 0x10, 2, 1),
- PIN_FIELD_BASE(119, 119, 4, 0x0040, 0x10, 20, 1),
- PIN_FIELD_BASE(120, 120, 4, 0x0040, 0x10, 17, 1),
- PIN_FIELD_BASE(121, 121, 4, 0x0050, 0x10, 5, 1),
- PIN_FIELD_BASE(122, 122, 4, 0x0040, 0x10, 14, 1),
- PIN_FIELD_BASE(123, 123, 4, 0x0050, 0x10, 2, 1),
- PIN_FIELD_BASE(124, 124, 4, 0x0040, 0x10, 11, 1),
- PIN_FIELD_BASE(125, 125, 4, 0x0040, 0x10, 29, 1),
- PIN_FIELD_BASE(139, 139, 4, 0x0040, 0x10, 8, 1),
- PIN_FIELD_BASE(140, 140, 4, 0x0040, 0x10, 26, 1),
- PIN_FIELD_BASE(141, 141, 4, 0x0040, 0x10, 5, 1),
- PIN_FIELD_BASE(142, 142, 4, 0x0040, 0x10, 23, 1),
- PIN_FIELD_BASE(160, 160, 7, 0x0030, 0x10, 2, 1),
- PIN_FIELD_BASE(161, 161, 7, 0x0030, 0x10, 5, 1),
- PIN_FIELD_BASE(200, 200, 8, 0x0010, 0x10, 5, 1),
- PIN_FIELD_BASE(201, 201, 8, 0x0010, 0x10, 11, 1),
- PIN_FIELD_BASE(202, 202, 5, 0x0020, 0x10, 2, 1),
- PIN_FIELD_BASE(203, 203, 5, 0x0020, 0x10, 5, 1),
- PIN_FIELD_BASE(204, 204, 8, 0x0010, 0x10, 2, 1),
- PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 8, 1),
-};
static const char * const mt8192_pinctrl_register_base_names[] = {
@@ -1355,9 +1313,7 @@ static const struct mtk_pin_reg_calc mt8192_reg_cals[PINCTRL_PIN_REG_MAX] = {
[PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8192_pin_pupd_range),
[PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8192_pin_r0_range),
[PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8192_pin_r1_range),
- [PINCTRL_PIN_REG_DRV_EN] = MTK_RANGE(mt8192_pin_e1e0en_range),
- [PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8192_pin_e0_range),
- [PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8192_pin_e1_range),
+ [PINCTRL_PIN_REG_DRV_ADV] = MTK_RANGE(mt8192_pin_drv_adv_range),
};
static const struct mtk_pin_soc mt8192_data = {
@@ -1376,8 +1332,8 @@ static const struct mtk_pin_soc mt8192_data = {
.drive_get = mtk_pinconf_drive_get_rev1,
.adv_pull_get = mtk_pinconf_adv_pull_get,
.adv_pull_set = mtk_pinconf_adv_pull_set,
- .adv_drive_get = mtk_pinconf_adv_drive_get,
- .adv_drive_set = mtk_pinconf_adv_drive_set,
+ .adv_drive_get = mtk_pinconf_adv_drive_get_raw,
+ .adv_drive_set = mtk_pinconf_adv_drive_set_raw,
};
static const struct of_device_id mt8192_pinctrl_of_match[] = {
--
2.25.5
next prev parent reply other threads:[~2022-06-24 13:37 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-24 13:36 [PATCH v2 0/5] pinctrl: mediatek: add driver support driving and resistance property on mt8192 Guodong Liu
2022-06-24 13:36 ` [PATCH v2 1/5] pinctrl: mediatek: add generic driving setup " Guodong Liu
2022-06-24 15:52 ` Nícolas F. R. A. Prado
2022-06-26 4:45 ` Guodong Liu
2022-06-25 23:26 ` Linus Walleij
2022-06-24 13:36 ` Guodong Liu [this message]
2022-06-24 18:26 ` [PATCH v2 2/5] pinctrl: mediatek: add drive for I2C related pins " Nícolas F. R. A. Prado
2022-06-24 13:36 ` [PATCH v2 3/5] pinctrl: mediatek: add rsel setting " Guodong Liu
2022-06-24 15:29 ` Nícolas F. R. A. Prado
2022-06-26 4:48 ` Guodong Liu
2022-06-24 13:36 ` [PATCH v2 4/5] pinctrl: mediatek: dropping original advanced drive configuration function Guodong Liu
2022-06-24 16:08 ` Nícolas F. R. A. Prado
2022-06-26 4:44 ` Guodong Liu
2022-06-24 13:37 ` [PATCH v2 5/5] pinctrl: mediatek: fix the pinconf definition of some GPIO pins Guodong Liu
2022-06-24 16:10 ` Nícolas F. R. A. Prado
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220624133700.15487-3-guodong.liu@mediatek.com \
--to=guodong.liu@mediatek.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=nfraprado@collabora.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=zhiyong.tao@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).