[PATCH 3/4] drm/bridge: anx7625: Fix NULL pointer crash when using edp-panel

[Hsin-Yi Wang <hsinyi@chromium.org>]

Move devm_of_dp_aux_populate_ep_devices() after pm runtime and i2c setup
to avoid NULL pointer crash.

edp-panel probe (generic_edp_panel_probe) calls pm_runtime_get_sync() to
read EDID. At this time, bridge should have pm runtime enabled and i2c
clients ready.

Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 drivers/gpu/drm/bridge/analogix/anx7625.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 478f5af381c7d..59ddeba33652b 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -2590,14 +2590,6 @@ static int anx7625_i2c_probe(struct i2c_client *client,
 	platform->aux.dev = dev;
 	platform->aux.transfer = anx7625_aux_transfer;
 	drm_dp_aux_init(&platform->aux);
-	devm_of_dp_aux_populate_ep_devices(&platform->aux);
-
-	ret = anx7625_parse_dt(dev, pdata);
-	if (ret) {
-		if (ret != -EPROBE_DEFER)
-			DRM_DEV_ERROR(dev, "fail to parse DT : %d\n", ret);
-		goto free_wq;
-	}
 
 	if (anx7625_register_i2c_dummy_clients(platform, client) != 0) {
 		ret = -ENOMEM;
@@ -2613,6 +2605,15 @@ static int anx7625_i2c_probe(struct i2c_client *client,
 	if (ret)
 		goto free_wq;
 
+	devm_of_dp_aux_populate_ep_devices(&platform->aux);
+
+	ret = anx7625_parse_dt(dev, pdata);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			DRM_DEV_ERROR(dev, "fail to parse DT : %d\n", ret);
+		goto free_wq;
+	}
+
 	if (!platform->pdata.low_power_mode) {
 		anx7625_disable_pd_protocol(platform);
 		pm_runtime_get_sync(dev);
-- 
2.37.0.rc0.161.g10f37bed90-goog