From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DE841C433EF for ; Thu, 7 Jul 2022 06:25:39 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234923AbiGGGZi (ORCPT ); Thu, 7 Jul 2022 02:25:38 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:57404 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234846AbiGGGZ2 (ORCPT ); Thu, 7 Jul 2022 02:25:28 -0400 Received: from fllv0015.ext.ti.com (fllv0015.ext.ti.com [198.47.19.141]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 94E212A964; Wed, 6 Jul 2022 23:25:25 -0700 (PDT) Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 2676PMc8027406; Thu, 7 Jul 2022 01:25:22 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1657175122; bh=VAflBJuCcU62/ArqheoABMhl2sg0hYzkfyl+//WYhNA=; h=From:To:Subject:Date:In-Reply-To:References; b=mXiOGmQcYrF6J8xdEoQFURLKsTy3b2gokcS74p0pN/Qg18OaBY2ArF6D61RO5tkmf u3tTY0lx2QyvXDaQl+VYqCxFpdqXGQIvuhNiCIuehpk8r1olaSwauLV5mAQh08EA1e o6vrGbIudh0U1leeQEBj0PBWTTFjxCYBqJ0sl9JE= Received: from DLEE102.ent.ti.com (dlee102.ent.ti.com [157.170.170.32]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 2676PMv0012122 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Thu, 7 Jul 2022 01:25:22 -0500 Received: from DLEE100.ent.ti.com (157.170.170.30) by DLEE102.ent.ti.com (157.170.170.32) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2308.14; Thu, 7 Jul 2022 01:25:22 -0500 Received: from lelv0327.itg.ti.com (10.180.67.183) by DLEE100.ent.ti.com (157.170.170.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2308.14 via Frontend Transport; Thu, 7 Jul 2022 01:25:22 -0500 Received: from ubuntu.ent.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0327.itg.ti.com (8.15.2/8.15.2) with ESMTP id 2676P51X106842; Thu, 7 Jul 2022 01:25:20 -0500 From: Matt Ranostay To: , , Subject: [PATCH RESEND 6/6] arm64: dts: k3-j721s2: Add support for OSPI Flashes Date: Wed, 6 Jul 2022 23:25:03 -0700 Message-ID: <20220707062503.295663-7-mranostay@ti.com> X-Mailer: git-send-email 2.36.1 In-Reply-To: <20220707062503.295663-1-mranostay@ti.com> References: <20220707062503.295663-1-mranostay@ti.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Aswath Govindraju J721S2 has an OSPI NOR flash on its SOM connected the OSPI0 instance and a QSPI NOR flash on the common processor board connected to the OSPI1 instance. Add support for the same Acked-by: Matt Ranostay Signed-off-by: Aswath Govindraju --- .../dts/ti/k3-j721s2-common-proc-board.dts | 34 +++++++++++++++ arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 42 +++++++++++++++++++ 2 files changed, 76 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index aa75dc541842..cb99a97af426 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -206,6 +206,20 @@ mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-pins-default { J721S2_WKUP_IOPAD(0x0c8, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */ >; }; + + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x040, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */ + J721S2_WKUP_IOPAD(0x05c, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */ + J721S2_WKUP_IOPAD(0x060, PIN_OUTPUT, 0) /* (C21) MCU_OSPI1_CSn1 */ + J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */ + J721S2_WKUP_IOPAD(0x050, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */ + J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */ + J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */ + J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */ + >; + }; }; &main_gpio2 { @@ -394,6 +408,26 @@ &usb0 { maximum-speed = "high-speed"; }; +&ospi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + &mcu_mcan0 { pinctrl-names = "default"; pinctrl-0 = <&mcu_mcan0_pins_default>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index 76f0ceacb6d4..a05c17dd69b6 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -39,6 +39,28 @@ transceiver0: can-phy0 { }; }; +&wkup_pmx0 { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */ + J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */ + J721S2_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (G17) MCU_OSPI0_CSn1 */ + J721S2_WKUP_IOPAD(0x038, PIN_OUTPUT, 0) /* (F14) MCU_OSPI0_CSn2 */ + J721S2_WKUP_IOPAD(0x03c, PIN_OUTPUT, 0) /* (F17) MCU_OSPI0_CSn3 */ + J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */ + J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */ + J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */ + J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E20) MCU_OSPI0_LBCLKO */ + >; + }; +}; + &main_pmx0 { main_i2c0_pins_default: main-i2c0-pins-default { pinctrl-single,pins = < @@ -78,6 +100,26 @@ &main_mcan16 { phys = <&transceiver0>; }; +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + &mailbox0_cluster0 { status = "disabled"; }; -- 2.36.1