From: Sean Anderson <sean.anderson@seco.com>
To: Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
netdev@vger.kernel.org
Cc: Jakub Kicinski <kuba@kernel.org>,
Madalin Bucur <madalin.bucur@nxp.com>,
"David S . Miller" <davem@davemloft.net>,
Paolo Abeni <pabeni@redhat.com>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
linux-kernel@vger.kernel.org, Eric Dumazet <edumazet@google.com>,
Andrew Lunn <andrew@lunn.ch>,
Sean Anderson <sean.anderson@seco.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH net-next 7/9] arm64: dts: Add compatible strings for Lynx PCSs
Date: Mon, 11 Jul 2022 12:05:17 -0400 [thread overview]
Message-ID: <20220711160519.741990-8-sean.anderson@seco.com> (raw)
In-Reply-To: <20220711160519.741990-1-sean.anderson@seco.com>
This adds appropriate compatible strings for Lynx PCSs on arm64 QorIQ
platforms. This also changes the node name to avoid warnings from
ethernet-phy.yaml.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
This will break mEMACs. The DPAA driver needs at least something like
[1] before this is applied. This is because adding a non-phy compatible
string to something on an MDIO bus makes it a regular MDIO device and
not a phy. This will break the existing code, which expects a phy and
not an MDIO device.
[1] https://lore.kernel.org/netdev/20220628221404.1444200-1-sean.anderson@seco.com/T/#md2dee008cbb0962bc9e943426b2c02d2e64b6e3b
.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 30 +++++++----
.../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 48 +++++++++++------
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 54 ++++++++++++-------
.../dts/freescale/qoriq-fman3-0-10g-0.dtsi | 3 +-
.../dts/freescale/qoriq-fman3-0-10g-1.dtsi | 3 +-
.../dts/freescale/qoriq-fman3-0-1g-0.dtsi | 3 +-
.../dts/freescale/qoriq-fman3-0-1g-1.dtsi | 3 +-
.../dts/freescale/qoriq-fman3-0-1g-2.dtsi | 3 +-
.../dts/freescale/qoriq-fman3-0-1g-3.dtsi | 3 +-
.../dts/freescale/qoriq-fman3-0-1g-4.dtsi | 3 +-
.../dts/freescale/qoriq-fman3-0-1g-5.dtsi | 3 +-
11 files changed, 104 insertions(+), 52 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index f476b7d8b056..259ca8f3f44d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -791,7 +791,8 @@ pcs_mdio1: mdio@8c07000 {
#size-cells = <0>;
status = "disabled";
- pcs1: ethernet-phy@0 {
+ pcs1: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -804,7 +805,8 @@ pcs_mdio2: mdio@8c0b000 {
#size-cells = <0>;
status = "disabled";
- pcs2: ethernet-phy@0 {
+ pcs2: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -817,19 +819,23 @@ pcs_mdio3: mdio@8c0f000 {
#size-cells = <0>;
status = "disabled";
- pcs3_0: ethernet-phy@0 {
+ pcs3_0: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
- pcs3_1: ethernet-phy@1 {
+ pcs3_1: ethernet-pcs@1 {
+ compatible = "fsl,lynx-pcs";
reg = <1>;
};
- pcs3_2: ethernet-phy@2 {
+ pcs3_2: ethernet-pcs@2 {
+ compatible = "fsl,lynx-pcs";
reg = <2>;
};
- pcs3_3: ethernet-phy@3 {
+ pcs3_3: ethernet-pcs@3 {
+ compatible = "fsl,lynx-pcs";
reg = <3>;
};
};
@@ -842,19 +848,23 @@ pcs_mdio7: mdio@8c1f000 {
#size-cells = <0>;
status = "disabled";
- pcs7_0: ethernet-phy@0 {
+ pcs7_0: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
- pcs7_1: ethernet-phy@1 {
+ pcs7_1: ethernet-pcs@1 {
+ compatible = "fsl,lynx-pcs";
reg = <1>;
};
- pcs7_2: ethernet-phy@2 {
+ pcs7_2: ethernet-pcs@2 {
+ compatible = "fsl,lynx-pcs";
reg = <2>;
};
- pcs7_3: ethernet-phy@3 {
+ pcs7_3: ethernet-pcs@3 {
+ compatible = "fsl,lynx-pcs";
reg = <3>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 4ba1e0499dfd..130a96054ff9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -545,7 +545,8 @@ pcs_mdio1: mdio@8c07000 {
#size-cells = <0>;
status = "disabled";
- pcs1: ethernet-phy@0 {
+ pcs1: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -558,7 +559,8 @@ pcs_mdio2: mdio@8c0b000 {
#size-cells = <0>;
status = "disabled";
- pcs2: ethernet-phy@0 {
+ pcs2: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -571,7 +573,8 @@ pcs_mdio3: mdio@8c0f000 {
#size-cells = <0>;
status = "disabled";
- pcs3: ethernet-phy@0 {
+ pcs3: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -584,7 +587,8 @@ pcs_mdio4: mdio@8c13000 {
#size-cells = <0>;
status = "disabled";
- pcs4: ethernet-phy@0 {
+ pcs4: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -597,7 +601,8 @@ pcs_mdio5: mdio@8c17000 {
#size-cells = <0>;
status = "disabled";
- pcs5: ethernet-phy@0 {
+ pcs5: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -610,7 +615,8 @@ pcs_mdio6: mdio@8c1b000 {
#size-cells = <0>;
status = "disabled";
- pcs6: ethernet-phy@0 {
+ pcs6: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -623,7 +629,8 @@ pcs_mdio7: mdio@8c1f000 {
#size-cells = <0>;
status = "disabled";
- pcs7: ethernet-phy@0 {
+ pcs7: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -636,7 +643,8 @@ pcs_mdio8: mdio@8c23000 {
#size-cells = <0>;
status = "disabled";
- pcs8: ethernet-phy@0 {
+ pcs8: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -649,7 +657,8 @@ pcs_mdio9: mdio@8c27000 {
#size-cells = <0>;
status = "disabled";
- pcs9: ethernet-phy@0 {
+ pcs9: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -662,7 +671,8 @@ pcs_mdio10: mdio@8c2b000 {
#size-cells = <0>;
status = "disabled";
- pcs10: ethernet-phy@0 {
+ pcs10: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -675,7 +685,8 @@ pcs_mdio11: mdio@8c2f000 {
#size-cells = <0>;
status = "disabled";
- pcs11: ethernet-phy@0 {
+ pcs11: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -688,7 +699,8 @@ pcs_mdio12: mdio@8c33000 {
#size-cells = <0>;
status = "disabled";
- pcs12: ethernet-phy@0 {
+ pcs12: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -701,7 +713,8 @@ pcs_mdio13: mdio@8c37000 {
#size-cells = <0>;
status = "disabled";
- pcs13: ethernet-phy@0 {
+ pcs13: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -714,7 +727,8 @@ pcs_mdio14: mdio@8c3b000 {
#size-cells = <0>;
status = "disabled";
- pcs14: ethernet-phy@0 {
+ pcs14: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -727,7 +741,8 @@ pcs_mdio15: mdio@8c3f000 {
#size-cells = <0>;
status = "disabled";
- pcs15: ethernet-phy@0 {
+ pcs15: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -740,7 +755,8 @@ pcs_mdio16: mdio@8c43000 {
#size-cells = <0>;
status = "disabled";
- pcs16: ethernet-phy@0 {
+ pcs16: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 47ea854720ce..b48b2d6acd3d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1398,7 +1398,8 @@ pcs_mdio1: mdio@8c07000 {
#size-cells = <0>;
status = "disabled";
- pcs1: ethernet-phy@0 {
+ pcs1: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1411,7 +1412,8 @@ pcs_mdio2: mdio@8c0b000 {
#size-cells = <0>;
status = "disabled";
- pcs2: ethernet-phy@0 {
+ pcs2: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1424,7 +1426,8 @@ pcs_mdio3: mdio@8c0f000 {
#size-cells = <0>;
status = "disabled";
- pcs3: ethernet-phy@0 {
+ pcs3: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1437,7 +1440,8 @@ pcs_mdio4: mdio@8c13000 {
#size-cells = <0>;
status = "disabled";
- pcs4: ethernet-phy@0 {
+ pcs4: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1450,7 +1454,8 @@ pcs_mdio5: mdio@8c17000 {
#size-cells = <0>;
status = "disabled";
- pcs5: ethernet-phy@0 {
+ pcs5: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1463,7 +1468,8 @@ pcs_mdio6: mdio@8c1b000 {
#size-cells = <0>;
status = "disabled";
- pcs6: ethernet-phy@0 {
+ pcs6: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1476,7 +1482,8 @@ pcs_mdio7: mdio@8c1f000 {
#size-cells = <0>;
status = "disabled";
- pcs7: ethernet-phy@0 {
+ pcs7: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1489,7 +1496,8 @@ pcs_mdio8: mdio@8c23000 {
#size-cells = <0>;
status = "disabled";
- pcs8: ethernet-phy@0 {
+ pcs8: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1502,7 +1510,8 @@ pcs_mdio9: mdio@8c27000 {
#size-cells = <0>;
status = "disabled";
- pcs9: ethernet-phy@0 {
+ pcs9: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1515,7 +1524,8 @@ pcs_mdio10: mdio@8c2b000 {
#size-cells = <0>;
status = "disabled";
- pcs10: ethernet-phy@0 {
+ pcs10: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1528,7 +1538,8 @@ pcs_mdio11: mdio@8c2f000 {
#size-cells = <0>;
status = "disabled";
- pcs11: ethernet-phy@0 {
+ pcs11: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1541,7 +1552,8 @@ pcs_mdio12: mdio@8c33000 {
#size-cells = <0>;
status = "disabled";
- pcs12: ethernet-phy@0 {
+ pcs12: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1554,7 +1566,8 @@ pcs_mdio13: mdio@8c37000 {
#size-cells = <0>;
status = "disabled";
- pcs13: ethernet-phy@0 {
+ pcs13: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1567,7 +1580,8 @@ pcs_mdio14: mdio@8c3b000 {
#size-cells = <0>;
status = "disabled";
- pcs14: ethernet-phy@0 {
+ pcs14: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1580,7 +1594,8 @@ pcs_mdio15: mdio@8c3f000 {
#size-cells = <0>;
status = "disabled";
- pcs15: ethernet-phy@0 {
+ pcs15: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1593,7 +1608,8 @@ pcs_mdio16: mdio@8c43000 {
#size-cells = <0>;
status = "disabled";
- pcs16: ethernet-phy@0 {
+ pcs16: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1606,7 +1622,8 @@ pcs_mdio17: mdio@8c47000 {
#size-cells = <0>;
status = "disabled";
- pcs17: ethernet-phy@0 {
+ pcs17: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
@@ -1619,7 +1636,8 @@ pcs_mdio18: mdio@8c4b000 {
#size-cells = <0>;
status = "disabled";
- pcs18: ethernet-phy@0 {
+ pcs18: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
index dbd2fc3ba790..4cf65e40126f 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -35,7 +35,8 @@ mdio@f1000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xf1000 0x1000>;
- pcsphy6: ethernet-phy@0 {
+ pcsphy6: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0x0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
index 6fc5d2560057..de483c7e9ae0 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -35,7 +35,8 @@ mdio@f3000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xf3000 0x1000>;
- pcsphy7: ethernet-phy@0 {
+ pcsphy7: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0x0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
index 4e02276fcf99..9c31b3b2292d 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -34,7 +34,8 @@ mdio@e1000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe1000 0x1000>;
- pcsphy0: ethernet-phy@0 {
+ pcsphy0: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0x0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
index 0312fa43fa77..72dbb26c7fd4 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -34,7 +34,8 @@ mdio@e3000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe3000 0x1000>;
- pcsphy1: ethernet-phy@0 {
+ pcsphy1: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0x0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
index af2df07971dd..e7aa07964d1c 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -34,7 +34,8 @@ mdio@e5000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe5000 0x1000>;
- pcsphy2: ethernet-phy@0 {
+ pcsphy2: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0x0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
index 4ac98dc8b227..fb6b8d4eb786 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -34,7 +34,8 @@ mdio@e7000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe7000 0x1000>;
- pcsphy3: ethernet-phy@0 {
+ pcsphy3: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0x0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
index bd932d8b0160..1d9cc79bf7e2 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -34,7 +34,8 @@ mdio@e9000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe9000 0x1000>;
- pcsphy4: ethernet-phy@0 {
+ pcsphy4: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0x0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
index 7de1c5203f3e..b6151d6f6859 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -34,7 +34,8 @@ mdio@eb000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xeb000 0x1000>;
- pcsphy5: ethernet-phy@0 {
+ pcsphy5: ethernet-pcs@0 {
+ compatible = "fsl,lynx-pcs";
reg = <0x0>;
};
};
--
2.35.1.1320.gc452695387.dirty
next prev parent reply other threads:[~2022-07-11 16:06 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-11 16:05 [RFC PATCH net-next 0/9] net: pcs: Add support for devices probed in the "usual" manner Sean Anderson
2022-07-11 16:05 ` [RFC PATCH net-next 1/9] dt-bindings: net: Add lynx PCS Sean Anderson
2022-07-12 8:47 ` Krzysztof Kozlowski
2022-07-12 14:57 ` Sean Anderson
2022-07-12 15:00 ` Krzysztof Kozlowski
2022-07-12 15:06 ` Sean Anderson
2022-07-11 16:05 ` [RFC PATCH net-next 2/9] dt-bindings: net: Expand pcs-handle to an array Sean Anderson
2022-07-12 8:51 ` Krzysztof Kozlowski
2022-07-12 15:06 ` Sean Anderson
2022-07-12 15:18 ` Krzysztof Kozlowski
2022-07-12 15:23 ` Sean Anderson
2022-07-12 15:59 ` Russell King (Oracle)
2022-07-14 10:45 ` Krzysztof Kozlowski
2022-07-18 19:46 ` Rob Herring
2022-07-11 16:05 ` [RFC PATCH net-next 3/9] net: pcs: Add helpers for registering and finding PCSs Sean Anderson
2022-07-11 19:42 ` Saravana Kannan
2022-07-11 19:53 ` Sean Anderson
2022-07-11 20:59 ` Russell King (Oracle)
2022-07-11 21:47 ` Sean Anderson
2022-07-11 21:55 ` Sean Anderson
2022-07-12 15:51 ` Russell King (Oracle)
2022-07-12 23:15 ` Sean Anderson
2022-07-11 16:05 ` [RFC PATCH net-next 4/9] net: pcs: lynx: Convert to an mdio driver Sean Anderson
2022-07-19 16:01 ` Vladimir Oltean
2022-07-19 16:16 ` Sean Anderson
2022-07-19 16:20 ` Vladimir Oltean
2022-07-11 16:05 ` [RFC PATCH net-next 5/9] net: pcs: lynx: Use pcs_get_by_provider to get PCS Sean Anderson
2022-07-19 17:26 ` Vladimir Oltean
2022-07-19 19:41 ` Sean Anderson
2022-07-11 16:05 ` [RFC PATCH net-next 6/9] net: pcs: lynx: Remove lynx_get_mdio_device and lynx_pcs_destroy Sean Anderson
2022-07-11 16:05 ` Sean Anderson [this message]
2022-07-11 16:05 ` [RFC PATCH net-next 8/9] powerpc: dts: Add compatible strings for Lynx PCSs Sean Anderson
2022-07-11 16:05 ` [RFC PATCH net-next 9/9] net: pcs: lynx: Remove remaining users of lynx_pcs_create Sean Anderson
2022-07-18 19:44 ` Rob Herring
2022-07-19 15:25 ` [RFC PATCH net-next 0/9] net: pcs: Add support for devices probed in the "usual" manner Vladimir Oltean
2022-07-19 15:28 ` Sean Anderson
2022-07-19 15:38 ` Vladimir Oltean
2022-07-19 15:46 ` Sean Anderson
2022-07-19 18:11 ` Vladimir Oltean
2022-07-19 19:34 ` Sean Anderson
2022-07-20 13:53 ` Vladimir Oltean
2022-07-21 21:42 ` Sean Anderson
[not found] ` <8622e12e-66c9-e338-27a1-07e53390881e@seco.com>
2022-07-29 22:15 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220711160519.741990-8-sean.anderson@seco.com \
--to=sean.anderson@seco.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=ioana.ciornei@nxp.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=madalin.bucur@nxp.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).