linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Amelie Delaunay <amelie.delaunay@foss.st.com>
To: Jonathan Corbet <corbet@lwn.net>, Vinod Koul <vkoul@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: <linux-doc@vger.kernel.org>, <dmaengine@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, Marek Vasut <marex@denx.de>,
	Amelie Delaunay <amelie.delaunay@foss.st.com>
Subject: [PATCH v2 3/4] dmaengine: stm32-dma: add support to trigger STM32 MDMA
Date: Wed, 13 Jul 2022 16:21:47 +0200	[thread overview]
Message-ID: <20220713142148.239253-4-amelie.delaunay@foss.st.com> (raw)
In-Reply-To: <20220713142148.239253-1-amelie.delaunay@foss.st.com>

STM32 MDMA can be triggered by STM32 DMA channels transfer complete.
The "request line number" triggering STM32 MDMA is the STM32 DMAMUX channel
id set by stm32-dmamux driver in dma_spec->args[3].

stm32-dma driver fills the struct stm32_dma_mdma_config used to configure
the MDMA with struct dma_slave_config .peripheral_config/.peripheral_size.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
No changes in v2.
---
 drivers/dma/stm32-dma.c | 56 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index adb25a11c70f..3916295fe154 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -142,6 +142,8 @@
 #define STM32_DMA_DIRECT_MODE_GET(n)	(((n) & STM32_DMA_DIRECT_MODE_MASK) >> 2)
 #define STM32_DMA_ALT_ACK_MODE_MASK	BIT(4)
 #define STM32_DMA_ALT_ACK_MODE_GET(n)	(((n) & STM32_DMA_ALT_ACK_MODE_MASK) >> 4)
+#define STM32_DMA_MDMA_STREAM_ID_MASK	GENMASK(19, 16)
+#define STM32_DMA_MDMA_STREAM_ID_GET(n) (((n) & STM32_DMA_MDMA_STREAM_ID_MASK) >> 16)
 
 enum stm32_dma_width {
 	STM32_DMA_BYTE,
@@ -195,6 +197,19 @@ struct stm32_dma_desc {
 	struct stm32_dma_sg_req sg_req[];
 };
 
+/**
+ * struct stm32_dma_mdma_cfg - STM32 DMA MDMA configuration
+ * @stream_id: DMA request to trigger STM32 MDMA transfer
+ * @ifcr: DMA interrupt flag clear register address,
+ *        used by STM32 MDMA to clear DMA Transfer Complete flag
+ * @tcf: DMA Transfer Complete flag
+ */
+struct stm32_dma_mdma_config {
+	u32 stream_id;
+	u32 ifcr;
+	u32 tcf;
+};
+
 struct stm32_dma_chan {
 	struct virt_dma_chan vchan;
 	bool config_init;
@@ -209,6 +224,8 @@ struct stm32_dma_chan {
 	u32 mem_burst;
 	u32 mem_width;
 	enum dma_status status;
+	bool trig_mdma;
+	struct stm32_dma_mdma_config mdma_config;
 };
 
 struct stm32_dma_device {
@@ -388,6 +405,13 @@ static int stm32_dma_slave_config(struct dma_chan *c,
 
 	memcpy(&chan->dma_sconfig, config, sizeof(*config));
 
+	/* Check if user is requesting DMA to trigger STM32 MDMA */
+	if (config->peripheral_size) {
+		config->peripheral_config = &chan->mdma_config;
+		config->peripheral_size = sizeof(chan->mdma_config);
+		chan->trig_mdma = true;
+	}
+
 	chan->config_init = true;
 
 	return 0;
@@ -576,6 +600,10 @@ static void stm32_dma_start_transfer(struct stm32_dma_chan *chan)
 	sg_req = &chan->desc->sg_req[chan->next_sg];
 	reg = &sg_req->chan_reg;
 
+	/* When DMA triggers STM32 MDMA, DMA Transfer Complete is managed by STM32 MDMA */
+	if (chan->trig_mdma && chan->dma_sconfig.direction != DMA_MEM_TO_DEV)
+		reg->dma_scr &= ~STM32_DMA_SCR_TCIE;
+
 	reg->dma_scr &= ~STM32_DMA_SCR_EN;
 	stm32_dma_write(dmadev, STM32_DMA_SCR(chan->id), reg->dma_scr);
 	stm32_dma_write(dmadev, STM32_DMA_SPAR(chan->id), reg->dma_spar);
@@ -725,6 +753,8 @@ static void stm32_dma_handle_chan_done(struct stm32_dma_chan *chan, u32 scr)
 
 	if (chan->desc->cyclic) {
 		vchan_cyclic_callback(&chan->desc->vdesc);
+		if (chan->trig_mdma)
+			return;
 		stm32_dma_sg_inc(chan);
 		/* cyclic while CIRC/DBM disable => post resume reconfiguration needed */
 		if (!(scr & (STM32_DMA_SCR_CIRC | STM32_DMA_SCR_DBM)))
@@ -1099,6 +1129,10 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_slave_sg(
 	else
 		chan->chan_reg.dma_scr &= ~STM32_DMA_SCR_PFCTRL;
 
+	/* Activate Double Buffer Mode if DMA triggers STM32 MDMA and more than 1 sg */
+	if (chan->trig_mdma && sg_len > 1)
+		chan->chan_reg.dma_scr |= STM32_DMA_SCR_DBM;
+
 	for_each_sg(sgl, sg, sg_len, i) {
 		ret = stm32_dma_set_xfer_param(chan, direction, &buswidth,
 					       sg_dma_len(sg),
@@ -1120,6 +1154,8 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_slave_sg(
 		desc->sg_req[i].chan_reg.dma_spar = chan->chan_reg.dma_spar;
 		desc->sg_req[i].chan_reg.dma_sm0ar = sg_dma_address(sg);
 		desc->sg_req[i].chan_reg.dma_sm1ar = sg_dma_address(sg);
+		if (chan->trig_mdma)
+			desc->sg_req[i].chan_reg.dma_sm1ar += sg_dma_len(sg);
 		desc->sg_req[i].chan_reg.dma_sndtr = nb_data_items;
 	}
 
@@ -1207,8 +1243,11 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_dma_cyclic(
 		desc->sg_req[i].chan_reg.dma_spar = chan->chan_reg.dma_spar;
 		desc->sg_req[i].chan_reg.dma_sm0ar = buf_addr;
 		desc->sg_req[i].chan_reg.dma_sm1ar = buf_addr;
+		if (chan->trig_mdma)
+			desc->sg_req[i].chan_reg.dma_sm1ar += period_len;
 		desc->sg_req[i].chan_reg.dma_sndtr = nb_data_items;
-		buf_addr += period_len;
+		if (!chan->trig_mdma)
+			buf_addr += period_len;
 	}
 
 	desc->num_sgs = num_periods;
@@ -1491,6 +1530,7 @@ static void stm32_dma_set_config(struct stm32_dma_chan *chan,
 		chan->threshold = STM32_DMA_FIFO_THRESHOLD_NONE;
 	if (STM32_DMA_ALT_ACK_MODE_GET(cfg->features))
 		chan->chan_reg.dma_scr |= STM32_DMA_SCR_TRBUFF;
+	chan->mdma_config.stream_id = STM32_DMA_MDMA_STREAM_ID_GET(cfg->features);
 }
 
 static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec,
@@ -1630,6 +1670,20 @@ static int stm32_dma_probe(struct platform_device *pdev)
 		chan->id = i;
 		chan->vchan.desc_free = stm32_dma_desc_free;
 		vchan_init(&chan->vchan, dd);
+
+		chan->mdma_config.ifcr = res->start;
+		chan->mdma_config.ifcr += (chan->id & 4) ? STM32_DMA_HIFCR : STM32_DMA_LIFCR;
+
+		chan->mdma_config.tcf = STM32_DMA_TCI;
+		/*
+		 * bit0 of chan->id represents the need to left shift by 6
+		 * bit1 of chan->id represents the need to extra left shift by 16
+		 * TCIF0, chan->id = b0000; TCIF4, chan->id = b0100: left shift by 0*6 + 0*16
+		 * TCIF1, chan->id = b0001; TCIF5, chan->id = b0101: left shift by 1*6 + 0*16
+		 * TCIF2, chan->id = b0010; TCIF6, chan->id = b0110: left shift by 0*6 + 1*16
+		 * TCIF3, chan->id = b0011; TCIF7, chan->id = b0111: left shift by 1*6 + 1*16
+		 */
+		chan->mdma_config.tcf <<= (6 * (chan->id & 0x1) + 16 * ((chan->id & 0x2) >> 1));
 	}
 
 	ret = dma_async_device_register(dd);
-- 
2.25.1


  parent reply	other threads:[~2022-07-13 14:22 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-13 14:21 [PATCH v2 0/4] STM32 DMA-MDMA chaining feature Amelie Delaunay
2022-07-13 14:21 ` [PATCH v2 1/4] docs: arm: stm32: introduce " Amelie Delaunay
2022-07-13 14:21 ` [PATCH v2 2/4] dmaengine: stm32-dmamux: set dmamux channel id in dma features bitfield Amelie Delaunay
2022-07-13 14:21 ` Amelie Delaunay [this message]
2022-07-14 19:02   ` [PATCH v2 3/4] dmaengine: stm32-dma: add support to trigger STM32 MDMA Marek Vasut
2022-07-19 15:30     ` Amelie Delaunay
2022-07-15 18:01   ` kernel test robot
2022-07-13 14:21 ` [PATCH v2 4/4] dmaengine: stm32-mdma: add support to be triggered by STM32 DMA Amelie Delaunay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220713142148.239253-4-amelie.delaunay@foss.st.com \
    --to=amelie.delaunay@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=corbet@lwn.net \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=marex@denx.de \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).