[PATCH v2 1/6] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H

[Gene Chen <gene.chen.richtek@gmail.com>]

From: Gene Chen <gene_chen@richtek.com>

Add binding for Richtek RT1711H

Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
 .../bindings/usb/richtek,rt1711h.yaml         | 100 ++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml

diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
new file mode 100644
index 000000000000..1999f614c89b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Richtek RT1711H Type-C Port Switch and Power Delivery controller
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  The RT1711H is a USB Type-C controller that complies with the latest
+  USB Type-C and PD standards. It does the USB Type-C detection including attach
+  and orientation. It integrates the physical layer of the USB BMC power
+  delivery protocol to allow up to 100W of power. The BMC PD block enables full
+  support for alternative interfaces of the Type-C specification.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt1711h
+      - richtek,rt1715
+    description:
+      RT1711H support PD20, RT1715 support PD30 except Fast Role Swap.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - connector
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt1711h@4e {
+        compatible = "richtek,rt1711h";
+        reg = <0x4e>;
+        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+          data-role = "dual";
+          power-role = "dual";
+          try-power-role = "sink";
+          source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          op-sink-microwatt = <10000000>;
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+              reg = <0>;
+              endpoint {
+                remote-endpoint = <&usb_hs>;
+              };
+            };
+            port@1 {
+              reg = <1>;
+              endpoint {
+                remote-endpoint = <&usb_ss>;
+              };
+            };
+            port@2 {
+              reg = <2>;
+              endpoint {
+                remote-endpoint = <&dp_aux>;
+              };
+            };
+          };
+        };
+      };
+    };
+...
-- 
2.25.1