[RFC net-next 1/2] net: dsa: bcm_sf2: Introduce helper for port override offset

From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	linux-kernel@vger.kernel.org (open list)
Subject: [RFC net-next 1/2] net: dsa: bcm_sf2: Introduce helper for port override offset
Date: Mon, 25 Jul 2022 14:49:41 -0700	[thread overview]
Message-ID: <20220725214942.97207-2-f.fainelli@gmail.com> (raw)
In-Reply-To: <20220725214942.97207-1-f.fainelli@gmail.com>

Depending upon the generation of switches, we have different offsets for
configuring a given port's status override where link parameters are
applied. Introduce a helper function that we re-use throughout the code
in order to let phylink callbacks configure the IMP/CPU port(s) in
subsequent changes.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/bcm_sf2.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index be0edfa093d0..10de0cffa047 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -94,6 +94,24 @@ static u16 bcm_sf2_reg_led_base(struct bcm_sf2_priv *priv, int port)
 	return REG_SWITCH_STATUS;
 }
 
+static u32 bcm_sf2_port_override_offset(struct bcm_sf2_priv *priv, int port)
+{
+	switch (priv->type) {
+	case BCM4908_DEVICE_ID:
+	case BCM7445_DEVICE_ID:
+		return port == 8 ? CORE_STS_OVERRIDE_IMP :
+				   CORE_STS_OVERRIDE_GMIIP_PORT(port);
+	case BCM7278_DEVICE_ID:
+		return port == 8 ? CORE_STS_OVERRIDE_IMP2 :
+				   CORE_STS_OVERRIDE_GMIIP2_PORT(port);
+	default:
+		WARN_ONCE(1, "Unsupported device: %d\n", priv->type);
+	}
+
+	/* RO fallback register */
+	return REG_SWITCH_STATUS;
+}
+
 /* Return the number of active ports, not counting the IMP (CPU) port */
 static unsigned int bcm_sf2_num_active_ports(struct dsa_switch *ds)
 {
@@ -167,11 +185,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 	b53_brcm_hdr_setup(ds, port);
 
 	if (port == 8) {
-		if (priv->type == BCM4908_DEVICE_ID ||
-		    priv->type == BCM7445_DEVICE_ID)
-			offset = CORE_STS_OVERRIDE_IMP;
-		else
-			offset = CORE_STS_OVERRIDE_IMP2;
+		offset = bcm_sf2_port_override_offset(priv, port);
 
 		/* Force link status for IMP port */
 		reg = core_readl(priv, offset);
@@ -813,12 +827,7 @@ static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
 		return;
 
 	if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
-		if (priv->type == BCM4908_DEVICE_ID ||
-		    priv->type == BCM7445_DEVICE_ID)
-			offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
-		else
-			offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
-
+		offset = bcm_sf2_port_override_offset(priv, port);
 		reg = core_readl(priv, offset);
 		reg &= ~LINK_STS;
 		core_writel(priv, reg, offset);
@@ -843,11 +852,7 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
 		u32 reg_rgmii_ctrl = 0;
 		u32 reg, offset;
 
-		if (priv->type == BCM4908_DEVICE_ID ||
-		    priv->type == BCM7445_DEVICE_ID)
-			offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
-		else
-			offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
+		offset = bcm_sf2_port_override_offset(priv, port);
 
 		if (interface == PHY_INTERFACE_MODE_RGMII ||
 		    interface == PHY_INTERFACE_MODE_RGMII_TXID ||
-- 
2.25.1

