linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: "Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Jingoo Han" <jingoohan1@gmail.com>,
	"Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Serge Semin" <fancer.lancer@gmail.com>,
	"Alexey Malahov" <Alexey.Malahov@baikalelectronics.ru>,
	"Pavel Parkhomenko" <Pavel.Parkhomenko@baikalelectronics.ru>,
	"Frank Li" <Frank.Li@nxp.com>, "Rob Herring" <robh+dt@kernel.org>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND v4 12/15] PCI: dwc: Add iATU regions size detection procedure
Date: Mon, 1 Aug 2022 19:22:28 +0530	[thread overview]
Message-ID: <20220801135228.GL93763@thinkpad> (raw)
In-Reply-To: <20220624143947.8991-13-Sergey.Semin@baikalelectronics.ru>

On Fri, Jun 24, 2022 at 05:39:44PM +0300, Serge Semin wrote:
> Depending on the DWC PCIe RC/EP/DM IP-core configuration parameters the
> controllers can be equipped not only with various number of inbound and
> outbound iATU windows, but with varied regions settings like alignment
> (which is also the minimum window size), minimum and maximum sizes. So to
> speak if internal ATU is enabled for the denoted IP-cores then the former
> settings will be defined by the CX_ATU_MIN_REGION_SIZE parameter while the
> later one will be determined by the CX_ATU_MAX_REGION_SIZE configuration
> parameter. Anyway having these parameters used in the driver will help to
> verify whether the requested inbound or outbound memory mappings can be
> fully created. Currently the driver doesn't perform any corresponding
> checking.
> 
> Note 1. The extended iATU regions have been supported since DWC PCIe
> v4.60a. There is no need in testing the upper limit register availability
> for the older cores.
> 
> Note 2. The regions alignment is determined with using the fls() method
> since the lower four bits of the ATU Limit register can be occupied with
> the Circular Buffer Increment setting, which can be initialized with
> zeros.
> 
> The (dma-)ranges verification will be added a bit later in one of the next
> commits.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 33 +++++++++++++++++---
>  drivers/pci/controller/dwc/pcie-designware.h |  2 ++
>  2 files changed, 31 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index f2aa65d02a6c..776752891d11 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -8,9 +8,11 @@
>   * Author: Jingoo Han <jg1.han@samsung.com>
>   */
>  
> +#include <linux/bitops.h>
>  #include <linux/delay.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
> +#include <linux/sizes.h>
>  #include <linux/types.h>
>  
>  #include "../../pci.h"
> @@ -525,7 +527,8 @@ static bool dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
>  static void dw_pcie_iatu_detect_regions(struct dw_pcie *pci)
>  {
>  	int max_region, ob, ib;
> -	u32 val;
> +	u32 val, min, dir;
> +	u64 max;
>  
>  	if (pci->iatu_unroll_enabled) {
>  		max_region = min((int)pci->atu_size / 512, 256);
> @@ -548,8 +551,29 @@ static void dw_pcie_iatu_detect_regions(struct dw_pcie *pci)
>  			break;
>  	}
>  
> -	pci->num_ib_windows = ib;
> +	if (ob) {
> +		dir = PCIE_ATU_REGION_DIR_OB;
> +	} else if (ib) {
> +		dir = PCIE_ATU_REGION_DIR_IB;
> +	} else {
> +		dev_err(pci->dev, "No iATU regions found\n");
> +		return;
> +	}
> +
> +	dw_pcie_writel_atu(pci, dir, 0, PCIE_ATU_LIMIT, 0x0);
> +	min = dw_pcie_readl_atu(pci, dir, 0, PCIE_ATU_LIMIT);
> +
> +	if (dw_pcie_ver_is_ge(pci, 460A)) {
> +		dw_pcie_writel_atu(pci, dir, 0, PCIE_ATU_UPPER_LIMIT, 0xFFFFFFFF);
> +		max = dw_pcie_readl_atu(pci, dir, 0, PCIE_ATU_UPPER_LIMIT);
> +	} else {
> +		max = 0;
> +	}
> +
>  	pci->num_ob_windows = ob;
> +	pci->num_ib_windows = ib;
> +	pci->region_align = 1 << fls(min);
> +	pci->region_limit = (max << 32) | (SZ_4G - 1);
>  }
>  
>  void dw_pcie_iatu_detect(struct dw_pcie *pci)
> @@ -582,8 +606,9 @@ void dw_pcie_iatu_detect(struct dw_pcie *pci)
>  	dev_info(pci->dev, "iATU unroll: %s\n", pci->iatu_unroll_enabled ?
>  		"enabled" : "disabled");
>  
> -	dev_info(pci->dev, "Detected iATU regions: %u outbound, %u inbound\n",
> -		 pci->num_ob_windows, pci->num_ib_windows);
> +	dev_info(pci->dev, "iATU regions: %u ob, %u ib, align %uK, limit %lluG\n",
> +		 pci->num_ob_windows, pci->num_ib_windows,
> +		 pci->region_align / SZ_1K, (pci->region_limit + 1) / SZ_1G);
>  }
>  
>  void dw_pcie_setup(struct dw_pcie *pci)
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index c18f0db09b31..25c86771c810 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -272,6 +272,8 @@ struct dw_pcie {
>  	size_t			atu_size;
>  	u32			num_ib_windows;
>  	u32			num_ob_windows;
> +	u32			region_align;
> +	u64			region_limit;
>  	struct dw_pcie_rp	pp;
>  	struct dw_pcie_ep	ep;
>  	const struct dw_pcie_ops *ops;
> -- 
> 2.35.1
> 

-- 
மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2022-08-01 13:52 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-24 14:39 [PATCH RESEND v4 00/15] PCI: dwc: Add hw version and dma-ranges support Serge Semin
2022-06-24 14:39 ` [PATCH RESEND v4 01/15] PCI: dwc: Add more verbose link-up message Serge Semin
2022-08-01 12:59   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 02/15] PCI: dwc: Detect iATU settings after getting "addr_space" resource Serge Semin
2022-07-28 14:38   ` Bjorn Helgaas
2022-08-01 13:01   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 03/15] PCI: dwc: Convert to using native IP-core versions representation Serge Semin
2022-07-28 15:24   ` Bjorn Helgaas
2022-07-28 15:31     ` Ben Dooks
2022-07-28 16:34       ` Bjorn Helgaas
2022-07-28 18:53     ` Serge Semin
2022-08-01 13:07   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 04/15] PCI: dwc: Add IP-core version detection procedure Serge Semin
2022-08-01 13:12   ` Manivannan Sadhasivam
2022-08-01 20:06     ` Bjorn Helgaas
2022-08-02  7:31       ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 05/15] PCI: dwc: Introduce Synopsys IP-core versions/types interface Serge Semin
2022-08-01 13:21   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 06/15] PCI: intel-gw: Drop manual DW PCIe controller version setup Serge Semin
2022-08-01 13:28   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 07/15] PCI: tegra194: " Serge Semin
2022-06-27  7:59   ` Vidya Sagar
2022-06-27 22:31     ` Serge Semin
2022-08-01 13:29   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 08/15] PCI: dwc: Add host de-initialization callback Serge Semin
2022-08-01 13:33   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 09/15] PCI: dwc: Drop inbound iATU types enumeration - dw_pcie_as_type Serge Semin
2022-08-01 13:36   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 10/15] PCI: dwc: Drop iATU regions enumeration - dw_pcie_region_type Serge Semin
2022-08-01 13:37   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 11/15] PCI: dwc: Simplify in/outbound iATU setup methods Serge Semin
2022-08-01 13:50   ` Manivannan Sadhasivam
2022-08-01 20:11     ` Bjorn Helgaas
2022-06-24 14:39 ` [PATCH RESEND v4 12/15] PCI: dwc: Add iATU regions size detection procedure Serge Semin
2022-08-01 13:52   ` Manivannan Sadhasivam [this message]
2022-06-24 14:39 ` [PATCH RESEND v4 13/15] PCI: dwc: Verify in/out regions against iATU constraints Serge Semin
2022-08-01 13:53   ` Manivannan Sadhasivam
2022-06-24 14:39 ` [PATCH RESEND v4 14/15] PCI: dwc: Check iATU in/outbound ranges setup methods status Serge Semin
2022-08-01 13:54   ` Manivannan Sadhasivam
2022-08-01 20:17     ` Bjorn Helgaas
2022-06-24 14:39 ` [PATCH RESEND v4 15/15] PCI: dwc: Introduce dma-ranges property support for RC-host Serge Semin
2022-07-28 22:11   ` Bjorn Helgaas
2022-07-29  4:52     ` Serge Semin
2022-07-29 11:33       ` Bjorn Helgaas
2022-07-29 14:38         ` Serge Semin
2022-08-01 14:00   ` Manivannan Sadhasivam
2022-08-09 20:07     ` Serge Semin
2022-07-11 18:48 ` [PATCH RESEND v4 00/15] PCI: dwc: Add hw version and dma-ranges support Serge Semin
2022-07-27 22:49 ` Bjorn Helgaas
2022-07-28 12:21   ` Serge Semin
2022-07-29  2:36 ` Bjorn Helgaas
2022-09-28  8:10   ` Lorenzo Pieralisi
2022-09-28 10:53     ` Serge Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220801135228.GL93763@thinkpad \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Frank.Li@nxp.com \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=Sergey.Semin@baikalelectronics.ru \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=lpieralisi@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).