From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Pavel Machek <pavel@ucw.cz>
Subject: [PATCH v1 1/1] leds: bcm6328: Get rid of custom led_init_default_state_get()
Date: Wed, 3 Aug 2022 00:25:49 +0300 [thread overview]
Message-ID: <20220802212549.7184-1-andriy.shevchenko@linux.intel.com> (raw)
LED core provides a helper to parse default state from firmware node.
Use it instead of custom implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/leds/leds-bcm6328.c | 49 ++++++++++++++++++-------------------
1 file changed, 24 insertions(+), 25 deletions(-)
diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c
index 2d4d87957a30..246f1296ab09 100644
--- a/drivers/leds/leds-bcm6328.c
+++ b/drivers/leds/leds-bcm6328.c
@@ -330,7 +330,9 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
{
struct led_init_data init_data = {};
struct bcm6328_led *led;
- const char *state;
+ enum led_default_state state;
+ unsigned long val, shift;
+ void __iomem *mode;
int rc;
led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
@@ -346,31 +348,29 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
if (of_property_read_bool(nc, "active-low"))
led->active_low = true;
- if (!of_property_read_string(nc, "default-state", &state)) {
- if (!strcmp(state, "on")) {
+ init_data.fwnode = of_fwnode_handle(nc);
+
+ state = led_init_default_state_get(init_data.fwnode);
+ switch (state) {
+ case LEDS_DEFSTATE_ON:
+ led->cdev.brightness = LED_FULL;
+ break;
+ case LEDS_DEFSTATE_KEEP:
+ shift = bcm6328_pin2shift(led->pin);
+ if (shift / 16)
+ mode = mem + BCM6328_REG_MODE_HI;
+ else
+ mode = mem + BCM6328_REG_MODE_LO;
+
+ val = bcm6328_led_read(mode) >> BCM6328_LED_SHIFT(shift % 16);
+ val &= BCM6328_LED_MODE_MASK;
+ if ((led->active_low && val == BCM6328_LED_MODE_OFF) ||
+ (!led->active_low && val == BCM6328_LED_MODE_ON))
led->cdev.brightness = LED_FULL;
- } else if (!strcmp(state, "keep")) {
- void __iomem *mode;
- unsigned long val, shift;
-
- shift = bcm6328_pin2shift(led->pin);
- if (shift / 16)
- mode = mem + BCM6328_REG_MODE_HI;
- else
- mode = mem + BCM6328_REG_MODE_LO;
-
- val = bcm6328_led_read(mode) >>
- BCM6328_LED_SHIFT(shift % 16);
- val &= BCM6328_LED_MODE_MASK;
- if ((led->active_low && val == BCM6328_LED_MODE_OFF) ||
- (!led->active_low && val == BCM6328_LED_MODE_ON))
- led->cdev.brightness = LED_FULL;
- else
- led->cdev.brightness = LED_OFF;
- } else {
+ else
led->cdev.brightness = LED_OFF;
- }
- } else {
+ break;
+ default:
led->cdev.brightness = LED_OFF;
}
@@ -378,7 +378,6 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
led->cdev.brightness_set = bcm6328_led_set;
led->cdev.blink_set = bcm6328_blink_set;
- init_data.fwnode = of_fwnode_handle(nc);
rc = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
if (rc < 0)
--
2.35.1
next reply other threads:[~2022-08-02 21:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-02 21:25 Andy Shevchenko [this message]
2022-08-03 1:05 ` [PATCH v1 1/1] leds: bcm6328: Get rid of custom led_init_default_state_get() kernel test robot
2022-08-03 12:21 ` kernel test robot
2022-08-03 12:21 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220802212549.7184-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).