linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Gene Chen <gene.chen.richtek@gmail.com>
Cc: heikki.krogerus@linux.intel.com, gregkh@linuxfoundation.org,
	robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, gene_chen@richtek.com,
	cy_huang@richtek.com
Subject: Re: [PATCH v4 5/7] usb: typec: tcpci_rt1711h: Add compatible id with rt1715
Date: Fri, 5 Aug 2022 04:27:50 -0700	[thread overview]
Message-ID: <20220805112750.GC1011279@roeck-us.net> (raw)
In-Reply-To: <20220805071714.150882-6-gene.chen.richtek@gmail.com>

On Fri, Aug 05, 2022 at 03:17:11PM +0800, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
> 
> Add compatible id with rt1715, and add initial setting for
> specific support PD30 command.
> 
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  drivers/usb/typec/tcpm/tcpci_rt1711h.c | 43 +++++++++++++++++++++++++++-------
>  1 file changed, 34 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> index 5c51d04..ff7deae 100644
> --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> @@ -18,6 +18,8 @@
>  
>  #define RT1711H_VID		0x29CF
>  #define RT1711H_PID		0x1711
> +#define RT1711H_DID		0x2171
> +#define RT1715_DID		0x2173
>  
>  #define RT1711H_PHYCTRL1	0x80
>  #define RT1711H_PHYCTRL2	0x81
> @@ -29,6 +31,7 @@
>  			    (((ck300) << 7) | ((ship_off) << 5) | \
>  			    ((auto_idle) << 3) | ((tout) & 0x07))
>  #define RT1711H_AUTOIDLEEN	BIT(3)
> +#define RT1711H_ENEXTMSG	BIT(4)
>  
>  #define RT1711H_RTCTRL11	0x9E
>  
> @@ -47,6 +50,7 @@ struct rt1711h_chip {
>  	struct device *dev;
>  	struct regulator *vbus;
>  	bool src_en;
> +	u16 did;
>  };
>  
>  static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
> @@ -83,8 +87,9 @@ static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata)
>  
>  static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
>  {
> -	int ret;
>  	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
> +	struct regmap *regmap = chip->data.regmap;
> +	int ret;
>  
>  	/* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */
>  	ret = rt1711h_write8(chip, RT1711H_RTCTRL8,
> @@ -92,6 +97,14 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
>  	if (ret < 0)
>  		return ret;
>  
> +	/* Enable PD30 extended message for RT1715 */
> +	if (chip->did == RT1715_DID) {
> +		ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
> +					 RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
>  	/* I2C reset : (val + 1) * 12.5ms */
>  	ret = rt1711h_write8(chip, RT1711H_RTCTRL11,
>  			     RT1711H_RTCTRL11_SET(1, 0x0F));
> @@ -229,7 +242,7 @@ static int rt1711h_sw_reset(struct rt1711h_chip *chip)
>  	return 0;
>  }
>  
> -static int rt1711h_check_revision(struct i2c_client *i2c)
> +static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *chip)
>  {
>  	int ret;
>  
> @@ -247,7 +260,15 @@ static int rt1711h_check_revision(struct i2c_client *i2c)
>  		dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret);
>  		return -ENODEV;
>  	}
> -	return 0;
> +	ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
> +	if (ret < 0)
> +		return ret;
> +	if (ret != chip->did) {
> +		dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
> +		return -ENODEV;
> +	}
> +	dev_dbg(&i2c->dev, "did is 0x%04x\n", ret);
> +	return ret;
>  }
>  
>  static int rt1711h_probe(struct i2c_client *client,
> @@ -256,16 +277,18 @@ static int rt1711h_probe(struct i2c_client *client,
>  	int ret;
>  	struct rt1711h_chip *chip;
>  
> -	ret = rt1711h_check_revision(client);
> +	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
> +	if (!chip)
> +		return -ENOMEM;
> +
> +	chip->did = (size_t)device_get_match_data(&client->dev);
> +
> +	ret = rt1711h_check_revision(client, chip);
>  	if (ret < 0) {
>  		dev_err(&client->dev, "check vid/pid fail\n");
>  		return ret;
>  	}
>  
> -	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
> -	if (!chip)
> -		return -ENOMEM;
> -
>  	chip->data.regmap = devm_regmap_init_i2c(client,
>  						 &rt1711h_regmap_config);
>  	if (IS_ERR(chip->data.regmap))
> @@ -316,13 +339,15 @@ static int rt1711h_remove(struct i2c_client *client)
>  
>  static const struct i2c_device_id rt1711h_id[] = {
>  	{ "rt1711h", 0 },
> +	{ "rt1715", 0 },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(i2c, rt1711h_id);
>  
>  #ifdef CONFIG_OF
>  static const struct of_device_id rt1711h_of_match[] = {
> -	{ .compatible = "richtek,rt1711h", },
> +	{ .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
> +	{ .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, rt1711h_of_match);
> -- 
> 2.7.4
> 

  reply	other threads:[~2022-08-05 11:28 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-05  7:17 [PATCH v4 0/7] usb: typec: tcpci_rt1711h: Add compatible with rt1715 Gene Chen
2022-08-05  7:17 ` [PATCH v4 1/7] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H Gene Chen
2022-08-05  7:17 ` [PATCH v4 2/7] usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn Gene Chen
2022-08-05 11:24   ` Guenter Roeck
2022-08-08 10:36   ` Heikki Krogerus
2022-08-05  7:17 ` [PATCH v4 3/7] usb: typec: tcpci_rt1711h: Add regulator support when source vbus Gene Chen
2022-08-05 11:26   ` Guenter Roeck
2022-08-05  7:17 ` [PATCH v4 4/7] usb: typec: tcpci_rt1711h: Add initial phy setting Gene Chen
2022-08-08 10:38   ` Heikki Krogerus
2022-08-05  7:17 ` [PATCH v4 5/7] usb: typec: tcpci_rt1711h: Add compatible id with rt1715 Gene Chen
2022-08-05 11:27   ` Guenter Roeck [this message]
2022-08-05  7:17 ` [PATCH v4 6/7] usb: typec: tcpci: Move function "tcpci_to_typec_cc" to common Gene Chen
2022-08-05 11:32   ` Guenter Roeck
2022-08-05  7:17 ` [PATCH v4 7/7] usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level Gene Chen
2022-08-05 11:33   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220805112750.GC1011279@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=cy_huang@richtek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gene.chen.richtek@gmail.com \
    --cc=gene_chen@richtek.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).