[PATCH 0/2] Add DISPCC driver for SM6115

[PATCH 0/2] Add DISPCC driver for SM6115

[Adam Skladowski]

This patch series introduce support for SM6115 display clock controller,
this driver is based on QCM2290 one.

Adam Skladowski (2):
  dt-bindings: clock: add QCOM SM6115 display clock bindings
  clk: qcom: Add display clock controller driver for SM6115

 .../bindings/clock/qcom,dispcc-sm6115.yaml    |  88 +++
 drivers/clk/qcom/Kconfig                      |   9 +
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/dispcc-sm6115.c              | 615 ++++++++++++++++++
 .../dt-bindings/clock/qcom,dispcc-sm6115.h    |  36 +
 5 files changed, 749 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,dispcc-sm6115.yaml
 create mode 100644 drivers/clk/qcom/dispcc-sm6115.c
 create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm6115.h

-- 
2.25.1

[PATCH 1/2] dt-bindings: clock: add QCOM SM6115 display clock bindings

[Adam Skladowski]

Add device tree bindings for display clock controller for
Qualcomm Technology Inc's SM6115 SoC.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 .../bindings/clock/qcom,dispcc-sm6115.yaml    | 88 +++++++++++++++++++
 .../dt-bindings/clock/qcom,dispcc-sm6115.h    | 36 ++++++++
 2 files changed, 124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,dispcc-sm6115.yaml
 create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm6115.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6115.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6115.yaml
new file mode 100644
index 000000000000..2b9671112934
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6115.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller Binding for SM6115
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks and
+  power domains on SM6115.
+
+  See also:
+    dt-bindings/clock/qcom,dispcc-sm6115.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: GPLL0 clock from GCC
+      - description: GPLL0 div clock from GCC
+      - description: Board sleep clock
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6115-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "gcc_disp_gpll0_clk_src",
+                    "gcc_disp_gpll0_div_clk_src",
+                    "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/include/dt-bindings/clock/qcom,dispcc-sm6115.h b/include/dt-bindings/clock/qcom,dispcc-sm6115.h
new file mode 100644
index 000000000000..d1a6c45b5029
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,dispcc-sm6115.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6115_H
+#define _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6115_H
+
+/* DISP_CC clocks */
+#define DISP_CC_PLL0			0
+#define DISP_CC_PLL0_OUT_MAIN		1
+#define DISP_CC_MDSS_AHB_CLK		2
+#define DISP_CC_MDSS_AHB_CLK_SRC	3
+#define DISP_CC_MDSS_BYTE0_CLK		4
+#define DISP_CC_MDSS_BYTE0_CLK_SRC	5
+#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC	6
+#define DISP_CC_MDSS_BYTE0_INTF_CLK	7
+#define DISP_CC_MDSS_ESC0_CLK		8
+#define DISP_CC_MDSS_ESC0_CLK_SRC	9
+#define DISP_CC_MDSS_MDP_CLK		10
+#define DISP_CC_MDSS_MDP_CLK_SRC	11
+#define DISP_CC_MDSS_MDP_LUT_CLK	12
+#define DISP_CC_MDSS_NON_GDSC_AHB_CLK	13
+#define DISP_CC_MDSS_PCLK0_CLK		14
+#define DISP_CC_MDSS_PCLK0_CLK_SRC	15
+#define DISP_CC_MDSS_ROT_CLK		16
+#define DISP_CC_MDSS_ROT_CLK_SRC	17
+#define DISP_CC_MDSS_VSYNC_CLK		18
+#define DISP_CC_MDSS_VSYNC_CLK_SRC	19
+#define DISP_CC_SLEEP_CLK		20
+#define DISP_CC_SLEEP_CLK_SRC		21
+
+/* DISP_CC GDSCR */
+#define MDSS_GDSC			0
+
+#endif
-- 
2.25.1

[PATCH 2/2] clk: qcom: Add display clock controller driver for SM6115

[Adam Skladowski]

Add support for the display clock controller found in SM6115/SM4250
based devices. This clock controller feeds the Multimedia Display
SubSystem (MDSS).
This driver is based upon one submitted for QCM2290.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 drivers/clk/qcom/Kconfig         |   9 +
 drivers/clk/qcom/Makefile        |   1 +
 drivers/clk/qcom/dispcc-sm6115.c | 615 +++++++++++++++++++++++++++++++
 3 files changed, 625 insertions(+)
 create mode 100644 drivers/clk/qcom/dispcc-sm6115.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 1cf1ef70e347..852888a849ae 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -616,6 +616,15 @@ config SM_CAMCC_8450
 	  Support for the camera clock controller on SM8450 devices.
 	  Say Y if you want to support camera devices and camera functionality.
 
+config SM_DISPCC_6115
+	tristate "SM6115 Display Clock Controller"
+	depends on SM_GCC_6115
+	help
+	  Support for the display clock controller on Qualcomm Technologies, Inc
+	  SM6115/SM4250 devices.
+	  Say Y if you want to support display devices and functionality such as
+	  splash screen
+
 config SM_DISPCC_6125
 	tristate "SM6125 Display Clock Controller"
 	depends on SM_GCC_6125
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index fbcf04073f07..a732ccb3b912 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_SDX_GCC_55) += gcc-sdx55.o
 obj-$(CONFIG_SDX_GCC_65) += gcc-sdx65.o
 obj-$(CONFIG_SM_CAMCC_8250) += camcc-sm8250.o
 obj-$(CONFIG_SM_CAMCC_8450) += camcc-sm8450.o
+obj-$(CONFIG_SM_DISPCC_6115) += dispcc-sm6115.o
 obj-$(CONFIG_SM_DISPCC_6125) += dispcc-sm6125.o
 obj-$(CONFIG_SM_DISPCC_6350) += dispcc-sm6350.o
 obj-$(CONFIG_SM_DISPCC_8250) += dispcc-sm8250.o
diff --git a/drivers/clk/qcom/dispcc-sm6115.c b/drivers/clk/qcom/dispcc-sm6115.c
new file mode 100644
index 000000000000..350d9c39d549
--- /dev/null
+++ b/drivers/clk/qcom/dispcc-sm6115.c
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on dispcc-qcm2290.c
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Linaro Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,dispcc-sm6115.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "common.h"
+#include "gdsc.h"
+
+enum {
+	P_BI_TCXO,
+	P_DISP_CC_PLL0_OUT_MAIN,
+	P_DSI0_PHY_PLL_OUT_BYTECLK,
+	P_DSI0_PHY_PLL_OUT_DSICLK,
+	P_DSI1_PHY_PLL_OUT_DSICLK,
+	P_GPLL0_OUT_MAIN,
+	P_SLEEP_CLK,
+};
+
+static const struct pll_vco spark_vco[] = {
+	{ 500000000, 1000000000, 2 },
+};
+
+/* 768MHz configuration */
+static const struct alpha_pll_config disp_cc_pll0_config = {
+	.l = 0x28,
+	.alpha = 0x0,
+	.alpha_en_mask = BIT(24),
+	.vco_val = 0x2 << 20,
+	.vco_mask = GENMASK(21, 20),
+	.main_output_mask = BIT(0),
+	.config_ctl_val = 0x4001055B,
+};
+
+static struct clk_alpha_pll disp_cc_pll0 = {
+	.offset = 0x0,
+	.vco_table = spark_vco,
+	.num_vco = ARRAY_SIZE(spark_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_pll0",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_ops,
+		},
+	},
+};
+
+static const struct clk_div_table post_div_table_disp_cc_pll0_out_main[] = {
+	{ 0x0, 1 },
+	{ }
+};
+static struct clk_alpha_pll_postdiv disp_cc_pll0_out_main = {
+	.offset = 0x0,
+	.post_div_shift = 8,
+	.post_div_table = post_div_table_disp_cc_pll0_out_main,
+	.num_post_div = ARRAY_SIZE(post_div_table_disp_cc_pll0_out_main),
+	.width = 4,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_pll0_out_main",
+		.parent_names = (const char *[]){ "disp_cc_pll0" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_alpha_pll_postdiv_ops,
+	},
+};
+
+
+static const struct parent_map disp_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_DSI0_PHY_PLL_OUT_BYTECLK, 1 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_0[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .fw_name = "dsi0_phy_pll_out_byteclk" },
+};
+
+static const struct parent_map disp_cc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_1[] = {
+	{ .fw_name = "bi_tcxo" },
+};
+
+static const struct parent_map disp_cc_parent_map_2[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 4 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_2[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .fw_name = "gcc_disp_gpll0_div_clk_src" },
+};
+
+static const struct parent_map disp_cc_parent_map_3[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_DISP_CC_PLL0_OUT_MAIN, 1 },
+	{ P_GPLL0_OUT_MAIN, 4 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_3[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &disp_cc_pll0_out_main.clkr.hw },
+	{ .fw_name = "gcc_disp_gpll0_clk_src" },
+};
+
+static const struct parent_map disp_cc_parent_map_4[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_DSI0_PHY_PLL_OUT_DSICLK, 1 },
+	{ P_DSI1_PHY_PLL_OUT_DSICLK, 2 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_4[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .fw_name = "dsi0_phy_pll_out_dsiclk" },
+	{ .fw_name = "dsi1_phy_pll_out_dsiclk" },
+};
+
+static const struct parent_map disp_cc_parent_map_5[] = {
+	{ P_SLEEP_CLK, 0 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_5[] = {
+	{ .fw_name = "sleep_clk" },
+};
+
+static struct clk_rcg2 disp_cc_mdss_byte0_clk_src = {
+	.cmd_rcgr = 0x20bc,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_0,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_byte0_clk_src",
+		.parent_data = disp_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_0),
+		/* For set_rate and set_parent to succeed, parent(s) must be enabled */
+		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE | CLK_GET_RATE_NOCACHE,
+		.ops = &clk_byte2_ops,
+	},
+};
+
+static struct clk_regmap_div disp_cc_mdss_byte0_div_clk_src = {
+	.reg = 0x20d4,
+	.shift = 0,
+	.width = 2,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "disp_cc_mdss_byte0_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]){
+			&disp_cc_mdss_byte0_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.ops = &clk_regmap_div_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_ahb_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(37500000, P_GPLL0_OUT_MAIN, 8, 0, 0),
+	F(75000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_mdss_ahb_clk_src = {
+	.cmd_rcgr = 0x2154,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_2,
+	.freq_tbl = ftbl_disp_cc_mdss_ahb_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_ahb_clk_src",
+		.parent_data = disp_cc_parent_data_2,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_2),
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_esc0_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_mdss_esc0_clk_src = {
+	.cmd_rcgr = 0x20d8,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_0,
+	.freq_tbl = ftbl_disp_cc_mdss_esc0_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_esc0_clk_src",
+		.parent_data = disp_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_0),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_mdp_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(192000000, P_DISP_CC_PLL0_OUT_MAIN, 4, 0, 0),
+	F(256000000, P_DISP_CC_PLL0_OUT_MAIN, 3, 0, 0),
+	F(307200000, P_DISP_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
+	F(384000000, P_DISP_CC_PLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_mdss_mdp_clk_src = {
+	.cmd_rcgr = 0x2074,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_3,
+	.freq_tbl = ftbl_disp_cc_mdss_mdp_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_mdp_clk_src",
+		.parent_data = disp_cc_parent_data_3,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static struct clk_rcg2 disp_cc_mdss_pclk0_clk_src = {
+	.cmd_rcgr = 0x205c,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_4,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_pclk0_clk_src",
+		.parent_data = disp_cc_parent_data_4,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_4),
+		/* For set_rate and set_parent to succeed, parent(s) must be enabled */
+		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE | CLK_GET_RATE_NOCACHE,
+		.ops = &clk_pixel_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_rot_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(192000000, P_DISP_CC_PLL0_OUT_MAIN, 4, 0, 0),
+	F(256000000, P_DISP_CC_PLL0_OUT_MAIN, 3, 0, 0),
+	F(307200000, P_DISP_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_mdss_rot_clk_src = {
+	.cmd_rcgr = 0x208c,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_3,
+	.freq_tbl = ftbl_disp_cc_mdss_rot_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_rot_clk_src",
+		.parent_data = disp_cc_parent_data_3,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static struct clk_rcg2 disp_cc_mdss_vsync_clk_src = {
+	.cmd_rcgr = 0x20a4,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_1,
+	.freq_tbl = ftbl_disp_cc_mdss_esc0_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_vsync_clk_src",
+		.parent_data = disp_cc_parent_data_1,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_sleep_clk_src[] = {
+	F(32764, P_SLEEP_CLK, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_sleep_clk_src = {
+	.cmd_rcgr = 0x6050,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_5,
+	.freq_tbl = ftbl_disp_cc_sleep_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_sleep_clk_src",
+		.parent_data = disp_cc_parent_data_5,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_5),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_branch disp_cc_mdss_ahb_clk = {
+	.halt_reg = 0x2044,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2044,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_ahb_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_ahb_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_byte0_clk = {
+	.halt_reg = 0x2024,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2024,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_byte0_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_byte0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_byte0_intf_clk = {
+	.halt_reg = 0x2028,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2028,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_byte0_intf_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_byte0_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_esc0_clk = {
+	.halt_reg = 0x202c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x202c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_esc0_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_esc0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_mdp_clk = {
+	.halt_reg = 0x2008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_mdp_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_mdp_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_mdp_lut_clk = {
+	.halt_reg = 0x2018,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x2018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_mdp_lut_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_mdp_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_non_gdsc_ahb_clk = {
+	.halt_reg = 0x4004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x4004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_non_gdsc_ahb_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_ahb_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_pclk0_clk = {
+	.halt_reg = 0x2004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_pclk0_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_pclk0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_rot_clk = {
+	.halt_reg = 0x2010,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_rot_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_rot_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_vsync_clk = {
+	.halt_reg = 0x2020,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2020,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_vsync_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_vsync_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_sleep_clk = {
+	.halt_reg = 0x6068,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x6068,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_sleep_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_sleep_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc mdss_gdsc = {
+	.gdscr = 0x3000,
+	.pd = {
+		.name = "mdss_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = HW_CTRL,
+};
+
+static struct gdsc *disp_cc_sm6115_gdscs[] = {
+	[MDSS_GDSC] = &mdss_gdsc,
+};
+
+static struct clk_regmap *disp_cc_sm6115_clocks[] = {
+	[DISP_CC_PLL0] = &disp_cc_pll0.clkr,
+	[DISP_CC_PLL0_OUT_MAIN] = &disp_cc_pll0_out_main.clkr,
+	[DISP_CC_MDSS_AHB_CLK] = &disp_cc_mdss_ahb_clk.clkr,
+	[DISP_CC_MDSS_AHB_CLK_SRC] = &disp_cc_mdss_ahb_clk_src.clkr,
+	[DISP_CC_MDSS_BYTE0_CLK] = &disp_cc_mdss_byte0_clk.clkr,
+	[DISP_CC_MDSS_BYTE0_CLK_SRC] = &disp_cc_mdss_byte0_clk_src.clkr,
+	[DISP_CC_MDSS_BYTE0_DIV_CLK_SRC] = &disp_cc_mdss_byte0_div_clk_src.clkr,
+	[DISP_CC_MDSS_BYTE0_INTF_CLK] = &disp_cc_mdss_byte0_intf_clk.clkr,
+	[DISP_CC_MDSS_ESC0_CLK] = &disp_cc_mdss_esc0_clk.clkr,
+	[DISP_CC_MDSS_ESC0_CLK_SRC] = &disp_cc_mdss_esc0_clk_src.clkr,
+	[DISP_CC_MDSS_MDP_CLK] = &disp_cc_mdss_mdp_clk.clkr,
+	[DISP_CC_MDSS_MDP_CLK_SRC] = &disp_cc_mdss_mdp_clk_src.clkr,
+	[DISP_CC_MDSS_MDP_LUT_CLK] = &disp_cc_mdss_mdp_lut_clk.clkr,
+	[DISP_CC_MDSS_NON_GDSC_AHB_CLK] = &disp_cc_mdss_non_gdsc_ahb_clk.clkr,
+	[DISP_CC_MDSS_PCLK0_CLK] = &disp_cc_mdss_pclk0_clk.clkr,
+	[DISP_CC_MDSS_PCLK0_CLK_SRC] = &disp_cc_mdss_pclk0_clk_src.clkr,
+	[DISP_CC_MDSS_ROT_CLK] = &disp_cc_mdss_rot_clk.clkr,
+	[DISP_CC_MDSS_ROT_CLK_SRC] = &disp_cc_mdss_rot_clk_src.clkr,
+	[DISP_CC_MDSS_VSYNC_CLK] = &disp_cc_mdss_vsync_clk.clkr,
+	[DISP_CC_MDSS_VSYNC_CLK_SRC] = &disp_cc_mdss_vsync_clk_src.clkr,
+	[DISP_CC_SLEEP_CLK] = &disp_cc_sleep_clk.clkr,
+	[DISP_CC_SLEEP_CLK_SRC] = &disp_cc_sleep_clk_src.clkr,
+};
+
+static const struct regmap_config disp_cc_sm6115_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x10000,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc disp_cc_sm6115_desc = {
+	.config = &disp_cc_sm6115_regmap_config,
+	.clks = disp_cc_sm6115_clocks,
+	.num_clks = ARRAY_SIZE(disp_cc_sm6115_clocks),
+	.gdscs = disp_cc_sm6115_gdscs,
+	.num_gdscs = ARRAY_SIZE(disp_cc_sm6115_gdscs),
+};
+
+static const struct of_device_id disp_cc_sm6115_match_table[] = {
+	{ .compatible = "qcom,sm6115-dispcc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, disp_cc_sm6115_match_table);
+
+static int disp_cc_sm6115_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	int ret;
+
+	regmap = qcom_cc_map(pdev, &disp_cc_sm6115_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	clk_alpha_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
+
+	/* Keep DISP_CC_XO_CLK always-ON */
+	regmap_update_bits(regmap, 0x604c, BIT(0), BIT(0));
+
+	ret = qcom_cc_really_probe(pdev, &disp_cc_sm6115_desc, regmap);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register DISP CC clocks\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static struct platform_driver disp_cc_sm6115_driver = {
+	.probe = disp_cc_sm6115_probe,
+	.driver = {
+		.name = "dispcc-sm6115",
+		.of_match_table = disp_cc_sm6115_match_table,
+	},
+};
+
+static int __init disp_cc_sm6115_init(void)
+{
+	return platform_driver_register(&disp_cc_sm6115_driver);
+}
+subsys_initcall(disp_cc_sm6115_init);
+
+static void __exit disp_cc_sm6115_exit(void)
+{
+	platform_driver_unregister(&disp_cc_sm6115_driver);
+}
+module_exit(disp_cc_sm6115_exit);
+
+MODULE_DESCRIPTION("QTI DISP_CC sm6115 Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.25.1

Re: [PATCH 1/2] dt-bindings: clock: add QCOM SM6115 display clock bindings

[Krzysztof Kozlowski]

On 18/08/2022 18:18, Adam Skladowski wrote:
> Add device tree bindings for display clock controller for
> Qualcomm Technology Inc's SM6115 SoC.
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> ---
>  .../bindings/clock/qcom,dispcc-sm6115.yaml    | 88 +++++++++++++++++++
>  .../dt-bindings/clock/qcom,dispcc-sm6115.h    | 36 ++++++++
>  2 files changed, 124 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,dispcc-sm6115.yaml
>  create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm6115.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6115.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6115.yaml
> new file mode 100644
> index 000000000000..2b9671112934
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6115.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6115.yaml#

Filename based on compatible, so:
qcom,sm6115-dispcc.yaml

I know it creates irregularity, but that's the naming convention for all.

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display Clock Controller Binding for SM6115
> +
> +maintainers:
> +  - Taniya Das <tdas@codeaurora.org>

I don't think the email is correct. Please use Bjorn's (and optionally
you can add yourself if you want to maintain this binding).

> +
> +description: |
> +  Qualcomm display clock control module which supports the clocks and
> +  power domains on SM6115.
> +
> +  See also:
> +    dt-bindings/clock/qcom,dispcc-sm6115.h
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sm6115-dispcc
> +
> +  clocks:
> +    items:
> +      - description: Board XO source
> +      - description: Byte clock from DSI PHY0
> +      - description: Pixel clock from DSI PHY0
> +      - description: GPLL0 clock from GCC
> +      - description: GPLL0 div clock from GCC
> +      - description: Board sleep clock
> +
> +  clock-names:
> +    items:
> +      - const: bi_tcxo
> +      - const: dsi0_phy_pll_out_byteclk
> +      - const: dsi0_phy_pll_out_dsiclk
> +      - const: gcc_disp_gpll0_clk_src
> +      - const: gcc_disp_gpll0_div_clk_src
> +      - const: sleep_clk
> +
> +  '#clock-cells':
> +    const: 1
> +
> +  '#reset-cells':
> +    const: 1
> +
> +  '#power-domain-cells':
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - '#clock-cells'
> +  - '#reset-cells'
> +  - '#power-domain-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,rpmcc.h>
> +    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
> +    clock-controller@5f00000 {
> +      compatible = "qcom,sm6115-dispcc";
> +      reg = <0x5f00000 0x20000>;
> +      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
> +               <&dsi0_phy 0>,
> +               <&dsi0_phy 1>,
> +               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
> +               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
> +               <&sleep_clk>;
> +      clock-names = "bi_tcxo",
> +                    "dsi0_phy_pll_out_byteclk",
> +                    "dsi0_phy_pll_out_dsiclk",
> +                    "gcc_disp_gpll0_clk_src",
> +                    "gcc_disp_gpll0_div_clk_src",
> +                    "sleep_clk";
> +      #clock-cells = <1>;
> +      #reset-cells = <1>;
> +      #power-domain-cells = <1>;
> +    };
> +...
> diff --git a/include/dt-bindings/clock/qcom,dispcc-sm6115.h b/include/dt-bindings/clock/qcom,dispcc-sm6115.h
> new file mode 100644
> index 000000000000..d1a6c45b5029
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,dispcc-sm6115.h

Filename based on compatible.

> @@ -0,0 +1,36 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6115_H
> +#define _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6115_H
> +


Best regards,
Krzysztof