[PATCH v5 3/3] net: ethernet: ti: am65-cpsw: Move phy_set_mode_ext() to correct location

[Siddharth Vadapalli <s-vadapalli@ti.com>]

In TI's J7200 SoC CPSW5G ports, each of the 4 ports can be configured
as a QSGMII main or QSGMII-SUB port. This configuration is performed
by phy-gmii-sel driver on invoking the phy_set_mode_ext() function.

It is necessary for the QSGMII main port to be configured before any of
the QSGMII-SUB interfaces are brought up. Currently, the QSGMII-SUB
interfaces come up before the QSGMII main port is configured.

Fix this by moving the call to phy_set_mode_ext() from
am65_cpsw_nuss_ndo_slave_open() to am65_cpsw_nuss_init_slave_ports(),
thereby ensuring that the QSGMII main port is configured before any of
the QSGMII-SUB ports are brought up.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index 033b40649308..7ef5d8208a4e 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -593,11 +593,6 @@ static int am65_cpsw_nuss_ndo_slave_open(struct net_device *ndev)
 	/* mac_sl should be configured via phy-link interface */
 	am65_cpsw_sl_ctl_reset(port);
 
-	ret = phy_set_mode_ext(port->slave.ifphy, PHY_MODE_ETHERNET,
-			       port->slave.phy_if);
-	if (ret)
-		goto error_cleanup;
-
 	ret = phylink_of_phy_connect(port->slave.phylink, port->slave.phy_node, 0);
 	if (ret)
 		goto error_cleanup;
@@ -1898,6 +1893,10 @@ static int am65_cpsw_nuss_init_slave_ports(struct am65_cpsw_common *common)
 			goto of_node_put;
 		}
 
+		ret = phy_set_mode_ext(port->slave.ifphy, PHY_MODE_ETHERNET, port->slave.phy_if);
+		if (ret)
+			goto of_node_put;
+
 		ret = of_get_mac_address(port_np, port->slave.mac_addr);
 		if (ret) {
 			am65_cpsw_am654_get_efuse_macid(port_np,
-- 
2.25.1