linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Henning Schild <henning.schild@siemens.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>, Pavel Machek <pavel@ucw.cz>,
	Hans de Goede <hdegoede@redhat.com>,
	Mark Gross <markgross@kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Lee Jones <lee@kernel.org>, <linux-gpio@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-leds@vger.kernel.org>,
	<platform-driver-x86@vger.kernel.org>
Cc: Sheng-Yuan Huang <syhuang3@nuvoton.com>,
	Tasanakorn Phaipool <tasanakorn@gmail.com>,
	<simon.guinot@sequanux.org>
Subject: Re: [PATCH v3 1/4] gpio-f7188x: Add GPIO support for Nuvoton NCT6116
Date: Mon, 22 Aug 2022 16:58:29 +0200	[thread overview]
Message-ID: <20220822165829.1e4fbc5f@md1za8fc.ad001.siemens.net> (raw)
In-Reply-To: <20220811153908.31283-2-henning.schild@siemens.com>

Am Thu, 11 Aug 2022 17:39:05 +0200
schrieb Henning Schild <henning.schild@siemens.com>:

> Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO chips are
> very similar to the ones from Fintek. In other subsystems they also
> share drivers and are called a family of drivers.
> 
> For the GPIO subsystem the only difference is that the direction bit
> is reversed and that there is only one data bit per pin. On the
> SuperIO level the logical device is another one.
> 
> Signed-off-by: Henning Schild <henning.schild@siemens.com>
> ---
>  drivers/gpio/gpio-f7188x.c | 71
> +++++++++++++++++++++++++++----------- 1 file changed, 51
> insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
> index 18a3147f5a42..7b05ecc611e9 100644
> --- a/drivers/gpio/gpio-f7188x.c
> +++ b/drivers/gpio/gpio-f7188x.c
> @@ -1,6 +1,7 @@
>  // SPDX-License-Identifier: GPL-2.0-or-later
>  /*
>   * GPIO driver for Fintek Super-I/O F71869, F71869A, F71882, F71889
> and F81866
> + * and Nuvoton Super-I/O NCT6116D

That Kconfig item could also use an update, will include in next
version.

Henning

>   *
>   * Copyright (C) 2010-2013 LaCie
>   *
> @@ -22,13 +23,12 @@
>  #define SIO_LDSEL		0x07	/* Logical device
> select */ #define SIO_DEVID		0x20	/* Device ID
> (2 bytes) */ #define SIO_DEVREV		0x22	/* Device
> revision */ -#define SIO_MANID		0x23	/* Fintek
> ID (2 bytes) */ 
> -#define SIO_LD_GPIO		0x06	/* GPIO logical
> device */ #define SIO_UNLOCK_KEY		0x87	/* Key to
> enable Super-I/O */ #define SIO_LOCK_KEY		0xAA
> /* Key to disable Super-I/O */ 
> -#define SIO_FINTEK_ID		0x1934	/* Manufacturer
> ID */ +#define SIO_LD_GPIO_FINTEK	0x06	/* GPIO logical
> device */ +#define SIO_LD_GPIO_NUVOTON	0x07	/* GPIO
> logical device */ #define SIO_F71869_ID		0x0814
> /* F71869 chipset ID */ #define SIO_F71869A_ID
> 0x1007	/* F71869A chipset ID */ #define SIO_F71882_ID
> 	0x0541	/* F71882 chipset ID */ @@ -37,7 +37,7 @@
>  #define SIO_F81866_ID		0x1010	/* F81866 chipset
> ID */ #define SIO_F81804_ID		0x1502  /* F81804 chipset
> ID, same for f81966 */ #define SIO_F81865_ID
> 0x0704	/* F81865 chipset ID */ -
> +#define SIO_NCT6116D_ID		0xD283  /* NCT6116D chipset
> ID */ 
>  enum chips {
>  	f71869,
> @@ -48,6 +48,7 @@ enum chips {
>  	f81866,
>  	f81804,
>  	f81865,
> +	nct6116d,
>  };
>  
>  static const char * const f7188x_names[] = {
> @@ -59,10 +60,12 @@ static const char * const f7188x_names[] = {
>  	"f81866",
>  	"f81804",
>  	"f81865",
> +	"nct6116d",
>  };
>  
>  struct f7188x_sio {
>  	int addr;
> +	int device;
>  	enum chips type;
>  };
>  
> @@ -170,6 +173,9 @@ static int f7188x_gpio_set_config(struct
> gpio_chip *chip, unsigned offset, /* Output mode register (0:open
> drain 1:push-pull). */ #define gpio_out_mode(base) (base + 3)
>  
> +#define gpio_dir_invert(type)	((type) == nct6116d)
> +#define gpio_data_single(type)	((type) == nct6116d)
> +
>  static struct f7188x_gpio_bank f71869_gpio_bank[] = {
>  	F7188X_GPIO_BANK(0, 6, 0xF0),
>  	F7188X_GPIO_BANK(10, 8, 0xE0),
> @@ -254,6 +260,17 @@ static struct f7188x_gpio_bank
> f81865_gpio_bank[] = { F7188X_GPIO_BANK(60, 5, 0x90),
>  };
>  
> +static struct f7188x_gpio_bank nct6116d_gpio_bank[] = {
> +	F7188X_GPIO_BANK(0, 8, 0xE0),
> +	F7188X_GPIO_BANK(10, 8, 0xE4),
> +	F7188X_GPIO_BANK(20, 8, 0xE8),
> +	F7188X_GPIO_BANK(30, 8, 0xEC),
> +	F7188X_GPIO_BANK(40, 8, 0xF0),
> +	F7188X_GPIO_BANK(50, 8, 0xF4),
> +	F7188X_GPIO_BANK(60, 8, 0xF8),
> +	F7188X_GPIO_BANK(70, 1, 0xFC),
> +};
> +
>  static int f7188x_gpio_get_direction(struct gpio_chip *chip,
> unsigned offset) {
>  	int err;
> @@ -264,13 +281,16 @@ static int f7188x_gpio_get_direction(struct
> gpio_chip *chip, unsigned offset) err = superio_enter(sio->addr);
>  	if (err)
>  		return err;
> -	superio_select(sio->addr, SIO_LD_GPIO);
> +	superio_select(sio->addr, sio->device);
>  
>  	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
>  
>  	superio_exit(sio->addr);
>  
> -	if (dir & 1 << offset)
> +	if (gpio_dir_invert(sio->type))
> +		dir = ~dir;
> +
> +	if (dir & BIT(offset))
>  		return GPIO_LINE_DIRECTION_OUT;
>  
>  	return GPIO_LINE_DIRECTION_IN;
> @@ -286,10 +306,14 @@ static int f7188x_gpio_direction_in(struct
> gpio_chip *chip, unsigned offset) err = superio_enter(sio->addr);
>  	if (err)
>  		return err;
> -	superio_select(sio->addr, SIO_LD_GPIO);
> +	superio_select(sio->addr, sio->device);
>  
>  	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
> -	dir &= ~BIT(offset);
> +
> +	if (gpio_dir_invert(sio->type))
> +		dir |= BIT(offset);
> +	else
> +		dir &= ~BIT(offset);
>  	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
>  
>  	superio_exit(sio->addr);
> @@ -307,11 +331,11 @@ static int f7188x_gpio_get(struct gpio_chip
> *chip, unsigned offset) err = superio_enter(sio->addr);
>  	if (err)
>  		return err;
> -	superio_select(sio->addr, SIO_LD_GPIO);
> +	superio_select(sio->addr, sio->device);
>  
>  	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
>  	dir = !!(dir & BIT(offset));
> -	if (dir)
> +	if (gpio_data_single(sio->type) || dir)
>  		data = superio_inb(sio->addr,
> gpio_data_out(bank->regbase)); else
>  		data = superio_inb(sio->addr,
> gpio_data_in(bank->regbase)); @@ -332,7 +356,7 @@ static int
> f7188x_gpio_direction_out(struct gpio_chip *chip, err =
> superio_enter(sio->addr); if (err)
>  		return err;
> -	superio_select(sio->addr, SIO_LD_GPIO);
> +	superio_select(sio->addr, sio->device);
>  
>  	data_out = superio_inb(sio->addr,
> gpio_data_out(bank->regbase)); if (value)
> @@ -342,7 +366,10 @@ static int f7188x_gpio_direction_out(struct
> gpio_chip *chip, superio_outb(sio->addr,
> gpio_data_out(bank->regbase), data_out); 
>  	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
> -	dir |= BIT(offset);
> +	if (gpio_dir_invert(sio->type))
> +		dir &= ~BIT(offset);
> +	else
> +		dir |= BIT(offset);
>  	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
>  
>  	superio_exit(sio->addr);
> @@ -360,7 +387,7 @@ static void f7188x_gpio_set(struct gpio_chip
> *chip, unsigned offset, int value) err = superio_enter(sio->addr);
>  	if (err)
>  		return;
> -	superio_select(sio->addr, SIO_LD_GPIO);
> +	superio_select(sio->addr, sio->device);
>  
>  	data_out = superio_inb(sio->addr,
> gpio_data_out(bank->regbase)); if (value)
> @@ -388,7 +415,7 @@ static int f7188x_gpio_set_config(struct
> gpio_chip *chip, unsigned offset, err = superio_enter(sio->addr);
>  	if (err)
>  		return err;
> -	superio_select(sio->addr, SIO_LD_GPIO);
> +	superio_select(sio->addr, sio->device);
>  
>  	data = superio_inb(sio->addr, gpio_out_mode(bank->regbase));
>  	if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
> @@ -449,6 +476,10 @@ static int f7188x_gpio_probe(struct
> platform_device *pdev) data->nr_bank = ARRAY_SIZE(f81865_gpio_bank);
>  		data->bank = f81865_gpio_bank;
>  		break;
> +	case nct6116d:
> +		data->nr_bank = ARRAY_SIZE(nct6116d_gpio_bank);
> +		data->bank = nct6116d_gpio_bank;
> +		break;
>  	default:
>  		return -ENODEV;
>  	}
> @@ -485,12 +516,8 @@ static int __init f7188x_find(int addr, struct
> f7188x_sio *sio) return err;
>  
>  	err = -ENODEV;
> -	devid = superio_inw(addr, SIO_MANID);
> -	if (devid != SIO_FINTEK_ID) {
> -		pr_debug(DRVNAME ": Not a Fintek device at
> 0x%08x\n", addr);
> -		goto err;
> -	}
>  
> +	sio->device = SIO_LD_GPIO_FINTEK;
>  	devid = superio_inw(addr, SIO_DEVID);
>  	switch (devid) {
>  	case SIO_F71869_ID:
> @@ -517,8 +544,12 @@ static int __init f7188x_find(int addr, struct
> f7188x_sio *sio) case SIO_F81865_ID:
>  		sio->type = f81865;
>  		break;
> +	case SIO_NCT6116D_ID:
> +		sio->device = SIO_LD_GPIO_NUVOTON;
> +		sio->type = nct6116d;
> +		break;
>  	default:
> -		pr_info(DRVNAME ": Unsupported Fintek device
> 0x%04x\n", devid);
> +		pr_info(DRVNAME ": Unsupported device 0x%04x\n",
> devid); goto err;
>  	}
>  	sio->addr = addr;


  parent reply	other threads:[~2022-08-22 14:58 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-11 15:39 [PATCH v3 0/4] add support for another simatic board Henning Schild
2022-08-11 15:39 ` [PATCH v3 1/4] gpio-f7188x: Add GPIO support for Nuvoton NCT6116 Henning Schild
2022-08-12  8:43   ` simon.guinot
2022-08-12 10:23     ` Henning Schild
2022-08-12 11:22       ` simon.guinot
2022-08-23  9:26         ` Henning Schild
2022-08-22 16:01     ` Henning Schild
     [not found]   ` <CAHp75VdgKHh+ma34pY=PzS6MB6NWNtzBAADqQmaJgT+couN1Dg@mail.gmail.com>
2022-08-22 13:26     ` Henning Schild
2022-08-22 14:58   ` Henning Schild [this message]
2022-08-11 15:39 ` [PATCH v3 2/4] gpio-f7188x: use unique labels for banks/chips Henning Schild
     [not found]   ` <CAHp75VdWdzsT9wc9BNNKTJ3-eBn3uWdCFXqE2TT+CiJnoTOQYw@mail.gmail.com>
2022-08-22 13:21     ` Henning Schild
2022-08-22 21:36       ` Andy Shevchenko
2022-08-26  8:31         ` Linus Walleij
2022-08-11 15:39 ` [PATCH v3 3/4] leds: simatic-ipc-leds-gpio: add new model 227G Henning Schild
2022-08-11 18:53   ` Hans de Goede
2022-08-11 15:39 ` [PATCH v3 4/4] platform/x86: simatic-ipc: enable watchdog for 227G Henning Schild
2022-08-11 18:53   ` Hans de Goede
2022-08-11 18:34 ` [PATCH v3 0/4] add support for another simatic board Henning Schild

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220822165829.1e4fbc5f@md1za8fc.ad001.siemens.net \
    --to=henning.schild@siemens.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=brgl@bgdev.pl \
    --cc=hdegoede@redhat.com \
    --cc=lee@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=markgross@kernel.org \
    --cc=pavel@ucw.cz \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=simon.guinot@sequanux.org \
    --cc=syhuang3@nuvoton.com \
    --cc=tasanakorn@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).