linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Liu Shixin <liushixin2@huawei.com>
To: Seth Jennings <sjenning@redhat.com>,
	Dan Streetman <ddstreet@ieee.org>,
	Vitaly Wool <vitaly.wool@konsulko.com>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>, <linux-kernel@vger.kernel.org>,
	Liu Shixin <liushixin2@huawei.com>,
	Kefeng Wang <wangkefeng.wang@huawei.com>
Subject: [PATCH -next v2 2/3] mm/zswap: delay the initializaton of zswap until the first enablement
Date: Fri, 26 Aug 2022 15:34:31 +0800	[thread overview]
Message-ID: <20220826073432.4168976-3-liushixin2@huawei.com> (raw)
In-Reply-To: <20220826073432.4168976-1-liushixin2@huawei.com>

In the initialization of zswap, about 18MB memory will be allocated for
zswap_pool in my machine. Since not all users use zswap, the memory may be
wasted. Save the memory for these users by delaying the initialization of
zswap to first enablement.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
---
 mm/zswap.c | 50 ++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 40 insertions(+), 10 deletions(-)

diff --git a/mm/zswap.c b/mm/zswap.c
index 84e38300f571..4c476c463035 100644
--- a/mm/zswap.c
+++ b/mm/zswap.c
@@ -81,6 +81,8 @@ static bool zswap_pool_reached_full;
 
 #define ZSWAP_PARAM_UNSET ""
 
+static int zswap_setup(void);
+
 /* Enable/disable zswap */
 static bool zswap_enabled = IS_ENABLED(CONFIG_ZSWAP_DEFAULT_ON);
 static int zswap_enabled_param_set(const char *,
@@ -220,6 +222,8 @@ static atomic_t zswap_pools_count = ATOMIC_INIT(0);
 
 /* init state */
 static int zswap_init_state;
+/* used to ensure the integrity of initialization */
+static DEFINE_MUTEX(zswap_init_lock);
 
 /* init completed, but couldn't create the initial pool */
 static bool zswap_has_pool;
@@ -273,13 +277,13 @@ static void zswap_update_total_size(void)
 **********************************/
 static struct kmem_cache *zswap_entry_cache;
 
-static int __init zswap_entry_cache_create(void)
+static int zswap_entry_cache_create(void)
 {
 	zswap_entry_cache = KMEM_CACHE(zswap_entry, 0);
 	return zswap_entry_cache == NULL;
 }
 
-static void __init zswap_entry_cache_destroy(void)
+static void zswap_entry_cache_destroy(void)
 {
 	kmem_cache_destroy(zswap_entry_cache);
 }
@@ -664,7 +668,7 @@ static struct zswap_pool *zswap_pool_create(char *type, char *compressor)
 	return NULL;
 }
 
-static __init struct zswap_pool *__zswap_pool_create_fallback(void)
+static struct zswap_pool *__zswap_pool_create_fallback(void)
 {
 	bool has_comp, has_zpool;
 
@@ -782,11 +786,17 @@ static int __zswap_param_set(const char *val, const struct kernel_param *kp,
 	if (!strcmp(s, *(char **)kp->arg) && zswap_has_pool)
 		return 0;
 
-	/* if this is load-time (pre-init) param setting,
+	/*
+	 * if zswap has not been initialized,
 	 * don't create a pool; that's done during init.
 	 */
-	if (zswap_init_state == ZSWAP_UNINIT)
-		return param_set_charp(s, kp);
+	mutex_lock(&zswap_init_lock);
+	if (zswap_init_state == ZSWAP_UNINIT) {
+		ret = param_set_charp(s, kp);
+		mutex_unlock(&zswap_init_lock);
+		return ret;
+	}
+	mutex_unlock(&zswap_init_lock);
 
 	if (!type) {
 		if (!zpool_has_pool(s)) {
@@ -876,6 +886,14 @@ static int zswap_zpool_param_set(const char *val,
 static int zswap_enabled_param_set(const char *val,
 				   const struct kernel_param *kp)
 {
+	if (system_state == SYSTEM_RUNNING) {
+		mutex_lock(&zswap_init_lock);
+		if (zswap_setup()) {
+			mutex_unlock(&zswap_init_lock);
+			return -ENODEV;
+		}
+		mutex_unlock(&zswap_init_lock);
+	}
 	if (zswap_init_state == ZSWAP_INIT_FAILED) {
 		pr_err("can't enable, initialization failed\n");
 		return -ENODEV;
@@ -1432,7 +1450,7 @@ static const struct frontswap_ops zswap_frontswap_ops = {
 
 static struct dentry *zswap_debugfs_root;
 
-static int __init zswap_debugfs_init(void)
+static int zswap_debugfs_init(void)
 {
 	if (!debugfs_initialized())
 		return -ENODEV;
@@ -1463,7 +1481,7 @@ static int __init zswap_debugfs_init(void)
 	return 0;
 }
 #else
-static int __init zswap_debugfs_init(void)
+static int zswap_debugfs_init(void)
 {
 	return 0;
 }
@@ -1472,11 +1490,14 @@ static int __init zswap_debugfs_init(void)
 /*********************************
 * module init and exit
 **********************************/
-static int __init init_zswap(void)
+static int zswap_setup(void)
 {
 	struct zswap_pool *pool;
 	int ret;
 
+	if (zswap_init_state != ZSWAP_UNINIT)
+		return 0;
+
 	if (zswap_entry_cache_create()) {
 		pr_err("entry cache creation failed\n");
 		goto cache_fail;
@@ -1534,8 +1555,17 @@ static int __init init_zswap(void)
 	zswap_enabled = false;
 	return -ENOMEM;
 }
+
+static int __init zswap_init(void)
+{
+	/* skip init if zswap is disabled when system startup */
+	if (!zswap_enabled)
+		return 0;
+	return zswap_setup();
+}
+
 /* must be late so crypto has time to come up */
-late_initcall(init_zswap);
+late_initcall(zswap_init);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Seth Jennings <sjennings@variantweb.net>");
-- 
2.25.1


  parent reply	other threads:[~2022-08-26  7:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-26  7:34 [PATCH -next v2 0/3] Delay the initializaton of zswap Liu Shixin
2022-08-26  7:34 ` [PATCH -next v2 1/3] mm/zswap: replace zswap_init_{started/failed} with zswap_init_state Liu Shixin
2022-08-26  7:34 ` Liu Shixin [this message]
2022-08-26  7:34 ` [PATCH -next v2 3/3] mm/zswap: skip confusing print info Liu Shixin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220826073432.4168976-3-liushixin2@huawei.com \
    --to=liushixin2@huawei.com \
    --cc=akpm@linux-foundation.org \
    --cc=ddstreet@ieee.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=sjenning@redhat.com \
    --cc=vitaly.wool@konsulko.com \
    --cc=wangkefeng.wang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).