From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 93091C54EE9 for ; Wed, 7 Sep 2022 11:17:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229560AbiIGLRR (ORCPT ); Wed, 7 Sep 2022 07:17:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:35202 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230256AbiIGLQp (ORCPT ); Wed, 7 Sep 2022 07:16:45 -0400 Received: from NAM12-BN8-obe.outbound.protection.outlook.com (mail-bn8nam12on20631.outbound.protection.outlook.com [IPv6:2a01:111:f400:fe5b::631]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B12B2A723A; Wed, 7 Sep 2022 04:16:37 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=N7ElhP5fWNV2s9+4z+v9ENr9Os1642R6w9ZPXew6PbyjVFZywGILbwOA8C9BXLntIo61b3VVJ48yeFxNpwfCZ+qNmdg1nRRKiqNtJqw0Gi7crIRs4/LmEfERacGCgXtMXUs6Kr0MUdih1K1NStRrY6n9KZftHkcWAPffyRhmxq2iGrz1+I51bzqJ9docoCZC42c0cJHXqPiPiRj5zJ3vj4tS4tvxt4MQHgkO2wvdNf1Gl78aPGJ1VmSBqxLrqRlND9nVSGk8EYOA4IlJJSACMtF3tQWarFTpVOswJjoyOjApwyOgjJvn7IB7vvsv5abqODAL+d/jFPOnJLZ4HAW/Zw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=7BVGDE4UA5oR2PAKTM0LcoFMCPFSa18JCXhLFpeEYVE=; b=asCk+fOrMvR9rUGiHQqnJf1ukWjBFvQuaWmM0nUAYJQs7Sm0GWODe/8KQL6uFzUCsz9tBeqAh9MLAUDBhc9woSPUxnowStyAkzJmUnmjzjA7QfNf+Whf14axFaDMrMiHLo+doUS4W+iaK6xf3UucBAUclFjYi5aeqU6RmG39bphjWx430qYSwGrEVhbEW3JUx0ZOjxv/XYsObSUzI4Z9W2n1VkEeEWRsSUr859QmTff0exGm0UIKJb4QzB57z5IfyJh0NHYyt76gI/N8P/l+FYZW2VKFQuQyP/cTZEgON1xZFkp6IiAHISkMsx+x1Xx/ffSVK4wdh5F3clyEElarkQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 165.204.84.17) smtp.rcpttodomain=kernel.org smtp.mailfrom=amd.com; dmarc=pass (p=quarantine sp=quarantine pct=100) action=none header.from=amd.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amd.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=7BVGDE4UA5oR2PAKTM0LcoFMCPFSa18JCXhLFpeEYVE=; b=0CE0d2K1Cs2ipqX6iLKJmaCuQ5wc7ceRQ2zRgFGjYAfeFOZNcJmwdngZYyqhqJp0gLPG1ILt367V0k7eHQo9p3tp8AFtZqLmDT6ak7Px/HMHszyTcgFgKasl4hy+O9K0vknfVVp9AjoxNTJBWQ9bcVrgTbYkmz+QW2LI7XR0x6s= Received: from DS7PR05CA0089.namprd05.prod.outlook.com (2603:10b6:8:56::6) by CH3PR12MB7524.namprd12.prod.outlook.com (2603:10b6:610:146::19) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5588.18; Wed, 7 Sep 2022 11:16:31 +0000 Received: from DS1PEPF0000B078.namprd05.prod.outlook.com (2603:10b6:8:56:cafe::a5) by DS7PR05CA0089.outlook.office365.com (2603:10b6:8:56::6) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5612.5 via Frontend Transport; Wed, 7 Sep 2022 11:16:31 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 165.204.84.17) smtp.mailfrom=amd.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=amd.com; Received-SPF: Pass (protection.outlook.com: domain of amd.com designates 165.204.84.17 as permitted sender) receiver=protection.outlook.com; client-ip=165.204.84.17; helo=SATLEXMB04.amd.com; pr=C Received: from SATLEXMB04.amd.com (165.204.84.17) by DS1PEPF0000B078.mail.protection.outlook.com (10.167.17.9) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.5612.11 via Frontend Transport; Wed, 7 Sep 2022 11:16:31 +0000 Received: from SATLEXMB04.amd.com (10.181.40.145) by SATLEXMB04.amd.com (10.181.40.145) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2375.28; Wed, 7 Sep 2022 06:16:28 -0500 Received: from xhdlakshmis40.xilinx.com (10.180.168.240) by SATLEXMB04.amd.com (10.181.40.145) with Microsoft SMTP Server id 15.1.2375.28 via Frontend Transport; Wed, 7 Sep 2022 06:16:23 -0500 From: Sai Krishna Potthuri To: Rob Herring , Krzysztof Kozlowski , Michal Simek , Borislav Petkov , Mauro Carvalho Chehab , Tony Luck , James Morse , "Robert Richter" CC: , , , , , , Sai Krishna Potthuri , Shubhrajyoti Datta Subject: [PATCH v4 2/2] edac: zynqmp_ocm: Add EDAC support for ZynqMP OCM Date: Wed, 7 Sep 2022 16:45:31 +0530 Message-ID: <20220907111531.703-3-sai.krishna.potthuri@amd.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20220907111531.703-1-sai.krishna.potthuri@amd.com> References: <20220907111531.703-1-sai.krishna.potthuri@amd.com> MIME-Version: 1.0 Content-Type: text/plain X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: DS1PEPF0000B078:EE_|CH3PR12MB7524:EE_ X-MS-Office365-Filtering-Correlation-Id: 828f08ec-2b39-4651-1a3a-08da90c26af2 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:165.204.84.17;CTRY:US;LANG:en;SCL:1;SRV:;IPV:CAL;SFV:NSPM;H:SATLEXMB04.amd.com;PTR:InfoDomainNonexistent;CAT:NONE;SFS:(13230016)(4636009)(39860400002)(396003)(136003)(376002)(346002)(46966006)(36840700001)(40470700004)(26005)(86362001)(82310400005)(6666004)(356005)(41300700001)(478600001)(40480700001)(2616005)(40460700003)(81166007)(83380400001)(82740400003)(47076005)(336012)(186003)(426003)(316002)(36860700001)(2906002)(103116003)(110136005)(4326008)(8676002)(30864003)(70206006)(54906003)(70586007)(36756003)(7416002)(1076003)(5660300002)(8936002)(36900700001);DIR:OUT;SFP:1101; X-OriginatorOrg: amd.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 07 Sep 2022 11:16:31.7559 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 828f08ec-2b39-4651-1a3a-08da90c26af2 X-MS-Exchange-CrossTenant-Id: 3dd8961f-e488-4e60-8e11-a82d994e183d X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=3dd8961f-e488-4e60-8e11-a82d994e183d;Ip=[165.204.84.17];Helo=[SATLEXMB04.amd.com] X-MS-Exchange-CrossTenant-AuthSource: DS1PEPF0000B078.namprd05.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: CH3PR12MB7524 Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add EDAC support for Xilinx ZynqMP OCM Controller, this driver reports CE and UE errors based on the interrupts, and also creates ue/ce sysfs entries for error injection. Signed-off-by: Sai Krishna Potthuri Signed-off-by: Shubhrajyoti Datta --- MAINTAINERS | 7 + drivers/edac/Kconfig | 9 + drivers/edac/Makefile | 1 + drivers/edac/zynqmp_ocm_edac.c | 622 +++++++++++++++++++++++++++++++++ 4 files changed, 639 insertions(+) create mode 100644 drivers/edac/zynqmp_ocm_edac.c diff --git a/MAINTAINERS b/MAINTAINERS index edc96cdb85e8..cd4c6c90bca3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -21692,6 +21692,13 @@ F: Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml F: drivers/dma/xilinx/xilinx_dpdma.c F: include/dt-bindings/dma/xlnx-zynqmp-dpdma.h +XILINX ZYNQMP OCM EDAC DRIVER +M: Shubhrajyoti Datta +M: Sai Krishna Potthuri +S: Maintained +F: Documentation/devicetree/bindings/edac/xlnx,zynqmp-ocmc.yaml +F: drivers/edac/zynqmp_ocm_edac.c + XILINX ZYNQMP PSGTR PHY DRIVER M: Anurag Kumar Vulisha M: Laurent Pinchart diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 58ab63642e72..08adedfd42b5 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -539,4 +539,13 @@ config EDAC_DMC520 Support for error detection and correction on the SoCs with ARM DMC-520 DRAM controller. +config EDAC_ZYNQMP_OCM + tristate "Xilinx ZynqMP OCM Controller" + depends on ARCH_ZYNQMP || COMPILE_TEST + help + Support for error detection and correction on the xilinx ZynqMP OCM + controller. + This driver can also be built as a module. If so, the module + will be called zynqmp_ocm_edac. + endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index 2d1641a27a28..634c1cec1588 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -84,3 +84,4 @@ obj-$(CONFIG_EDAC_QCOM) += qcom_edac.o obj-$(CONFIG_EDAC_ASPEED) += aspeed_edac.o obj-$(CONFIG_EDAC_BLUEFIELD) += bluefield_edac.o obj-$(CONFIG_EDAC_DMC520) += dmc520_edac.o +obj-$(CONFIG_EDAC_ZYNQMP_OCM) += zynqmp_ocm_edac.o diff --git a/drivers/edac/zynqmp_ocm_edac.c b/drivers/edac/zynqmp_ocm_edac.c new file mode 100644 index 000000000000..a8da94f3e067 --- /dev/null +++ b/drivers/edac/zynqmp_ocm_edac.c @@ -0,0 +1,622 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Xilinx ZynqMP OCM ECC Driver + * + * Copyright (C) 2022 Advanced Micro Devices, Inc. + */ + +#include +#include +#include +#include +#include +#include + +#include "edac_module.h" + +#define ZYNQMP_OCM_EDAC_MSG_SIZE 256 + +#define ZYNQMP_OCM_EDAC_STRING "zynqmp_ocm" + +/* Controller registers */ +#define CTRL_OFST 0x0 +#define OCM_ISR_OFST 0x04 +#define OCM_IMR_OFST 0x08 +#define OCM_IEN_OFST 0x0C +#define OCM_IDS_OFST 0x10 + +/* ECC control register */ +#define ECC_CTRL_OFST 0x14 + +/* Correctable error info registers */ +#define CE_FFA_OFST 0x1C +#define CE_FFD0_OFST 0x20 +#define CE_FFD1_OFST 0x24 +#define CE_FFD2_OFST 0x28 +#define CE_FFD3_OFST 0x2C +#define CE_FFE_OFST 0x30 + +/* Uncorrectable error info registers */ +#define UE_FFA_OFST 0x34 +#define UE_FFD0_OFST 0x38 +#define UE_FFD1_OFST 0x3C +#define UE_FFD2_OFST 0x40 +#define UE_FFD3_OFST 0x44 +#define UE_FFE_OFST 0x48 + +/* ECC control register bit field definitions */ +#define ECC_CTRL_CLR_CE_ERR 0x40 +#define ECC_CTRL_CLR_UE_ERR 0x80 + +/* Fault injection data and count registers */ +#define OCM_FID0_OFST 0x4C +#define OCM_FID1_OFST 0x50 +#define OCM_FID2_OFST 0x54 +#define OCM_FID3_OFST 0x58 +#define OCM_FIC_OFST 0x74 + +#define UE_MAX_BITPOS_LOWER 31 +#define UE_MIN_BITPOS_UPPER 32 +#define UE_MAX_BITPOS_UPPER 63 + +/* Interrupt masks */ +#define OCM_CEINTR_MASK BIT(6) +#define OCM_UEINTR_MASK BIT(7) +#define OCM_ECC_ENABLE_MASK BIT(0) +#define OCM_CEUE_MASK GENMASK(7, 6) + +#define OCM_FICOUNT_MASK GENMASK(23, 0) +#define OCM_BASEVAL 0xFFFC0000 +#define EDAC_DEVICE "ZynqMP-OCM" + +/** + * struct ecc_error_info - ECC error log information + * @addr: Fault generated at this address + * @data0: Generated fault data + * @data1: Generated fault data + */ +struct ecc_error_info { + u32 addr; + u32 data0; + u32 data1; +}; + +/** + * struct zynqmp_ocm_ecc_status - ECC status information to report + * @ce_cnt: Correctable error count + * @ue_cnt: Uncorrectable error count + * @ceinfo: Correctable error log information + * @ueinfo: Uncorrectable error log information + */ +struct zynqmp_ocm_ecc_status { + u32 ce_cnt; + u32 ue_cnt; + struct ecc_error_info ceinfo; + struct ecc_error_info ueinfo; +}; + +/** + * struct zynqmp_ocm_edac_priv - DDR memory controller private instance data + * @baseaddr: Base address of the DDR controller + * @message: Buffer for framing the event specific info + * @stat: ECC status information + * @p_data: Pointer to platform data + * @ce_cnt: Correctable Error count + * @ue_cnt: Uncorrectable Error count + * @ce_bitpos: Bit position for Correctable Error + * @ue_bitpos0: First bit position for Uncorrectable Error + * @ue_bitpos1: Second bit position for Uncorrectable Error + */ +struct zynqmp_ocm_edac_priv { + void __iomem *baseaddr; + char message[ZYNQMP_OCM_EDAC_MSG_SIZE]; + struct zynqmp_ocm_ecc_status stat; + const struct zynqmp_ocm_platform_data *p_data; + u32 ce_cnt; + u32 ue_cnt; + u8 ce_bitpos; + u8 ue_bitpos0; + u8 ue_bitpos1; +}; + +/** + * zynqmp_ocm_edac_geterror_info - Get the current ecc error info + * @base: Pointer to the base address of the ddr memory controller + * @p: Pointer to the ocm ecc status structure + * @mask: Status register mask value + * + * Determines there is any ecc error or not + * + */ +static void zynqmp_ocm_edac_geterror_info(void __iomem *base, + struct zynqmp_ocm_ecc_status *p, int mask) +{ + if (mask & OCM_CEINTR_MASK) { + p->ce_cnt++; + p->ceinfo.data0 = readl(base + CE_FFD0_OFST); + p->ceinfo.data1 = readl(base + CE_FFD1_OFST); + p->ceinfo.addr = (OCM_BASEVAL | readl(base + CE_FFA_OFST)); + writel(ECC_CTRL_CLR_CE_ERR, base + OCM_ISR_OFST); + } else if (mask & OCM_UEINTR_MASK) { + p->ue_cnt++; + p->ueinfo.data0 = readl(base + UE_FFD0_OFST); + p->ueinfo.data1 = readl(base + UE_FFD1_OFST); + p->ueinfo.addr = (OCM_BASEVAL | readl(base + UE_FFA_OFST)); + writel(ECC_CTRL_CLR_UE_ERR, base + OCM_ISR_OFST); + } +} + +/** + * zynqmp_ocm_edac_handle_error - Handle controller error types CE and UE + * @dci: Pointer to the edac device controller instance + * @p: Pointer to the ocm ecc status structure + * + * Handles the controller ECC correctable and uncorrectable error. + */ +static void zynqmp_ocm_edac_handle_error(struct edac_device_ctl_info *dci, + struct zynqmp_ocm_ecc_status *p) +{ + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info; + struct ecc_error_info *pinf; + + if (p->ce_cnt) { + pinf = &p->ceinfo; + snprintf(priv->message, ZYNQMP_OCM_EDAC_MSG_SIZE, + "\nOCM ECC error type :%s\n" + "Addr: [0x%X]\nFault Data[31:0]: [0x%X]\n" + "Fault Data[63:32]: [0x%X]", + "CE", pinf->addr, pinf->data0, pinf->data1); + edac_device_handle_ce(dci, 0, 0, priv->message); + } + + if (p->ue_cnt) { + pinf = &p->ueinfo; + snprintf(priv->message, ZYNQMP_OCM_EDAC_MSG_SIZE, + "\nOCM ECC error type :%s\n" + "Addr: [0x%X]\nFault Data[31:0]: [0x%X]\n" + "Fault Data[63:32]: [0x%X]", + "UE", pinf->addr, pinf->data0, pinf->data1); + edac_device_handle_ue(dci, 0, 0, priv->message); + } + + memset(p, 0, sizeof(*p)); +} + +/** + * zynqmp_ocm_edac_intr_handler - isr routine + * @irq: irq number + * @dev_id: device id pointer + * + * This is the ISR routine called by edac core interrupt thread. + * Used to check and post ECC errors. + * + * Return: IRQ_NONE, if interrupt not set or IRQ_HANDLED otherwise + */ +static irqreturn_t zynqmp_ocm_edac_intr_handler(int irq, void *dev_id) +{ + struct edac_device_ctl_info *dci = dev_id; + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info; + int regval; + + regval = readl(priv->baseaddr + OCM_ISR_OFST); + if (!(regval & OCM_CEUE_MASK)) + return IRQ_NONE; + + zynqmp_ocm_edac_geterror_info(priv->baseaddr, + &priv->stat, regval); + + priv->ce_cnt += priv->stat.ce_cnt; + priv->ue_cnt += priv->stat.ue_cnt; + zynqmp_ocm_edac_handle_error(dci, &priv->stat); + + return IRQ_HANDLED; +} + +/** + * zynqmp_ocm_edac_get_eccstate - Return the controller ecc status + * @base: Pointer to the ddr memory controller base address + * + * Get the ECC enable/disable status for the controller + * + * Return: ecc status 0/1. + */ +static bool zynqmp_ocm_edac_get_eccstate(void __iomem *base) +{ + return readl(base + ECC_CTRL_OFST) & OCM_ECC_ENABLE_MASK; +} + +/** + * zynqmp_ocm_edac_inject_fault_count_show - Shows fault injection count + * @dci: Pointer to the edac device struct + * @data: Pointer to user data + * + * Shows the fault injection count, once the counter reaches + * zero, it injects errors + * Return: Number of bytes copied on success else error code. + */ +static ssize_t zynqmp_ocm_edac_inject_fault_count_show(struct edac_device_ctl_info *dci, + char *data) +{ + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info; + + return sprintf(data, "FIC: 0x%x\n", + readl(priv->baseaddr + OCM_FIC_OFST)); +} + +/** + * zynqmp_ocm_edac_inject_fault_count_store - write fi count + * @dci: Pointer to the edac device struct + * @data: Pointer to user data + * @count: read the size bytes from buffer + * + * Update the fault injection count register, once the counter reaches + * zero, it injects errors + * Return: Number of bytes copied on success else error code. + */ +static ssize_t zynqmp_ocm_edac_inject_fault_count_store(struct edac_device_ctl_info *dci, + const char *data, size_t count) +{ + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info; + u32 ficount; + + if (!data) + return -EFAULT; + + if (kstrtouint(data, 0, &ficount)) + return -EINVAL; + + ficount &= OCM_FICOUNT_MASK; + writel(ficount, priv->baseaddr + OCM_FIC_OFST); + + return count; +} + +/** + * zynqmp_ocm_edac_inject_cebitpos_show - Shows CE bit position + * @dci: Pointer to the edac device struct + * @data: Pointer to user data + * + * Shows the Correctable error bit position, + * Return: Number of bytes copied on success else error code. + */ +static ssize_t zynqmp_ocm_edac_inject_cebitpos_show(struct edac_device_ctl_info + *dci, char *data) +{ + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info; + + if (priv->ce_bitpos <= UE_MAX_BITPOS_LOWER) + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n", + ((readl(priv->baseaddr + OCM_FID0_OFST)))); + + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n", + ((readl(priv->baseaddr + OCM_FID1_OFST)))); +} + +/** + * zynqmp_ocm_edac_inject_cebitpos_store - Set CE bit position + * @dci: Pointer to the edac device struct + * @data: Pointer to user data + * @count: read the size bytes from buffer + * + * Set any one bit to inject CE error + * Return: Number of bytes copied on success else error code. + */ +static ssize_t zynqmp_ocm_edac_inject_cebitpos_store(struct edac_device_ctl_info *dci, + const char *data, size_t count) +{ + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info; + + if (!data) + return -EFAULT; + + if (kstrtou8(data, 0, &priv->ce_bitpos)) + return -EINVAL; + + if (priv->ce_bitpos <= UE_MAX_BITPOS_LOWER) { + writel(1 << priv->ce_bitpos, priv->baseaddr + OCM_FID0_OFST); + writel(0, priv->baseaddr + OCM_FID1_OFST); + } else if (priv->ce_bitpos <= UE_MAX_BITPOS_UPPER) { + writel(1 << (priv->ce_bitpos - UE_MIN_BITPOS_UPPER), + priv->baseaddr + OCM_FID1_OFST); + writel(0, priv->baseaddr + OCM_FID0_OFST); + } else { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Bit number > 64 is not valid\n"); + } + + return count; +} + +/** + * zynqmp_ocm_edac_inject_uebitpos0_show - Shows UE bit postion0 + * @dci: Pointer to the edac device struct + * @data: Pointer to user data + * + * Shows the one of bit position for UE error + * Return: Number of bytes copied on success else error code. + */ +static ssize_t zynqmp_ocm_edac_inject_uebitpos0_show(struct edac_device_ctl_info *dci, + char *data) +{ + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info; + + if (priv->ue_bitpos0 <= UE_MAX_BITPOS_LOWER) + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n", + ((readl(priv->baseaddr + OCM_FID0_OFST)))); + + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n", + ((readl(priv->baseaddr + OCM_FID1_OFST)))); +} + +/** + * zynqmp_ocm_edac_inject_uebitpos0_store - set UE bit position0 + * @dci: Pointer to the edac device struct + * @data: Pointer to user data + * @count: read the size bytes from buffer + * + * Set the first bit position for UE Error generation,we need to configure + * any two bit positions to inject UE Error + * Return: Number of bytes copied on success else error code. + */ +static ssize_t zynqmp_ocm_edac_inject_uebitpos0_store(struct edac_device_ctl_info *dci, + const char *data, size_t count) +{ + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info; + + if (!data) + return -EFAULT; + + if (kstrtou8(data, 0, &priv->ue_bitpos0)) + return -EINVAL; + + if (priv->ue_bitpos0 <= UE_MAX_BITPOS_LOWER) + writel(1 << priv->ue_bitpos0, priv->baseaddr + OCM_FID0_OFST); + else if (priv->ue_bitpos0 <= UE_MAX_BITPOS_UPPER) + writel(1 << (priv->ue_bitpos0 - UE_MIN_BITPOS_UPPER), + priv->baseaddr + OCM_FID1_OFST); + else + edac_printk(KERN_ERR, EDAC_DEVICE, + "Bit position > 64 is not valid\n"); + edac_printk(KERN_INFO, EDAC_DEVICE, + "Set another bit position for UE\n"); + + return count; +} + +/** + * zynqmp_ocm_edac_inject_uebitpos1_show - Shows UE bit postion1 + * @dci: Pointer to the edac device struct + * @data: Pointer to user data + * + * Shows the second bit position configured for UE error + * Return: Number of bytes copied on success else error code. + */ +static ssize_t zynqmp_ocm_edac_inject_uebitpos1_show(struct edac_device_ctl_info *dci, + char *data) +{ + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info; + + if (priv->ue_bitpos1 <= UE_MAX_BITPOS_LOWER) + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n", + ((readl(priv->baseaddr + OCM_FID0_OFST)))); + + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n", + ((readl(priv->baseaddr + OCM_FID1_OFST)))); +} + +/** + * zynqmp_ocm_edac_inject_uebitpos1_store - Set UE second bit position + * @dci: Pointer to the edac device struct + * @data: Pointer to user data + * @count: read the size bytes from buffer + * + * Set the second bit position for UE Error generation,we need to configure + * any two bit positions to inject UE Error + * Return: Number of bytes copied on success else error code. + */ +static ssize_t zynqmp_ocm_edac_inject_uebitpos1_store(struct edac_device_ctl_info *dci, + const char *data, size_t count) +{ + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info; + u32 mask; + + if (!data) + return -EFAULT; + + if (kstrtou8(data, 0, &priv->ue_bitpos1)) + return -EINVAL; + + if (priv->ue_bitpos0 == priv->ue_bitpos1) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Bit positions should not be equal\n"); + return -EINVAL; + } + + /* + * If both bit positions are referring to 32 bit data, then configure + * only FID0 register or if it is 64 bit data, then configure only + * FID1 register. + */ + if (priv->ue_bitpos0 <= UE_MAX_BITPOS_LOWER && + priv->ue_bitpos1 <= UE_MAX_BITPOS_LOWER) { + mask = (1 << priv->ue_bitpos0); + mask |= (1 << priv->ue_bitpos1); + writel(mask, priv->baseaddr + OCM_FID0_OFST); + writel(0, priv->baseaddr + OCM_FID1_OFST); + } else if ((priv->ue_bitpos0 >= UE_MIN_BITPOS_UPPER && + priv->ue_bitpos0 <= UE_MAX_BITPOS_UPPER) && + (priv->ue_bitpos1 >= UE_MIN_BITPOS_UPPER && + priv->ue_bitpos1 <= UE_MAX_BITPOS_UPPER)) { + mask = (1 << (priv->ue_bitpos0 - UE_MIN_BITPOS_UPPER)); + mask |= (1 << (priv->ue_bitpos1 - UE_MIN_BITPOS_UPPER)); + writel(mask, priv->baseaddr + OCM_FID1_OFST); + writel(0, priv->baseaddr + OCM_FID0_OFST); + } + + /* + * If one bit position is referring a bit in 32 bit data and other in + * 64 bit data, just configure FID0/FID1 based on uebitpos1. + */ + if (priv->ue_bitpos0 <= UE_MAX_BITPOS_LOWER && + (priv->ue_bitpos1 >= UE_MIN_BITPOS_UPPER && + priv->ue_bitpos1 <= UE_MAX_BITPOS_UPPER)) { + writel(1 << (priv->ue_bitpos1 - UE_MIN_BITPOS_UPPER), + priv->baseaddr + OCM_FID1_OFST); + } else if ((priv->ue_bitpos0 >= UE_MIN_BITPOS_UPPER && + priv->ue_bitpos0 <= UE_MAX_BITPOS_UPPER) && + (priv->ue_bitpos1 <= UE_MAX_BITPOS_LOWER)) { + writel(1 << priv->ue_bitpos1, + priv->baseaddr + OCM_FID0_OFST); + } else { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Bit position > 64 is not valid, Valid bits:[63:0]\n"); + } + + edac_printk(KERN_INFO, EDAC_DEVICE, + "UE at Bit Position0: %d Bit Position1: %d\n", + priv->ue_bitpos0, priv->ue_bitpos1); + + return count; +} + +static struct edac_dev_sysfs_attribute zynqmp_ocm_edac_sysfs_attributes[] = { + { + .attr = { + .name = "inject_cebitpos", + .mode = (0644) + }, + .show = zynqmp_ocm_edac_inject_cebitpos_show, + .store = zynqmp_ocm_edac_inject_cebitpos_store}, + { + .attr = { + .name = "inject_uebitpos0", + .mode = (0644) + }, + .show = zynqmp_ocm_edac_inject_uebitpos0_show, + .store = zynqmp_ocm_edac_inject_uebitpos0_store}, + { + .attr = { + .name = "inject_uebitpos1", + .mode = (0644) + }, + .show = zynqmp_ocm_edac_inject_uebitpos1_show, + .store = zynqmp_ocm_edac_inject_uebitpos1_store}, + { + .attr = { + .name = "inject_fault_count", + .mode = (0644) + }, + .show = zynqmp_ocm_edac_inject_fault_count_show, + .store = zynqmp_ocm_edac_inject_fault_count_store}, + /* End of list */ + { + .attr = {.name = NULL} + } +}; + +/** + * zynqmp_set_ocm_edac_sysfs_attributes - create sysfs attributes + * @edac_dev: Pointer to the edac device struct + * + * Creates sysfs entries for error injection + */ +static void zynqmp_set_ocm_edac_sysfs_attributes(struct edac_device_ctl_info + *edac_dev) +{ + edac_dev->sysfs_attributes = zynqmp_ocm_edac_sysfs_attributes; +} + +static int zynqmp_ocm_edac_probe(struct platform_device *pdev) +{ + struct zynqmp_ocm_edac_priv *priv; + struct edac_device_ctl_info *dci; + void __iomem *baseaddr; + struct resource *res; + int irq, ret; + + baseaddr = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(baseaddr)) + return PTR_ERR(baseaddr); + + if (!zynqmp_ocm_edac_get_eccstate(baseaddr)) { + edac_printk(KERN_INFO, EDAC_DEVICE, + "ECC not enabled\n"); + return -ENXIO; + } + + dci = edac_device_alloc_ctl_info(sizeof(*priv), ZYNQMP_OCM_EDAC_STRING, + 1, ZYNQMP_OCM_EDAC_STRING, 1, 0, NULL, 0, + edac_device_alloc_index()); + if (!dci) + return -ENOMEM; + + priv = dci->pvt_info; + platform_set_drvdata(pdev, dci); + dci->dev = &pdev->dev; + priv->baseaddr = baseaddr; + dci->mod_name = pdev->dev.driver->name; + dci->ctl_name = ZYNQMP_OCM_EDAC_STRING; + dci->dev_name = dev_name(&pdev->dev); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto free_dev_ctl; + } + + ret = devm_request_irq(&pdev->dev, irq, + zynqmp_ocm_edac_intr_handler, + 0, dev_name(&pdev->dev), dci); + if (ret) { + edac_printk(KERN_ERR, EDAC_DEVICE, "Failed to request Irq\n"); + goto free_dev_ctl; + } + + writel(OCM_CEUE_MASK, priv->baseaddr + OCM_IEN_OFST); + + zynqmp_set_ocm_edac_sysfs_attributes(dci); + ret = edac_device_add_device(dci); + if (ret) + goto free_dev_ctl; + + return 0; + +free_dev_ctl: + edac_device_free_ctl_info(dci); + + return ret; +} + +static int zynqmp_ocm_edac_remove(struct platform_device *pdev) +{ + struct edac_device_ctl_info *dci = platform_get_drvdata(pdev); + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info; + + writel(OCM_CEUE_MASK, priv->baseaddr + OCM_IDS_OFST); + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(dci); + + return 0; +} + +static const struct of_device_id zynqmp_ocm_edac_match[] = { + { .compatible = "xlnx,zynqmp-ocmc-1.0"}, + { /* end of table */ } +}; + +MODULE_DEVICE_TABLE(of, zynqmp_ocm_edac_match); + +static struct platform_driver zynqmp_ocm_edac_driver = { + .driver = { + .name = "zynqmp-ocm-edac", + .of_match_table = zynqmp_ocm_edac_match, + }, + .probe = zynqmp_ocm_edac_probe, + .remove = zynqmp_ocm_edac_remove, +}; + +module_platform_driver(zynqmp_ocm_edac_driver); + +MODULE_AUTHOR("Advanced Micro Devices, Inc"); +MODULE_DESCRIPTION("Xilinx ZynqMP OCM ECC driver"); +MODULE_LICENSE("GPL"); -- 2.17.1