[PATCH v5 1/3] arm64: dts: qcom: split beryllium dts into common dtsi and tianma dts

[Joel Selvaraj <joelselvaraj.oss@gmail.com>]

There are two panel variants of Xiaomi Poco F1. Tianma and EBBG panel.
The previous beryllium dts supported the Tianma variant. In order to
add support for EBBG variant, the common nodes from beryllium dts are
moved to a new common dtsi and to make the variants distinguishable,
sdm845-xiaomi-beryllium.dts is now named as
sdm845-xiaomi-beryllium-tianma.dts. The model property is updated to
distinguish between the variants. The compatibility property is
moved to the tianma variant, but it is not updated to avoid any
further conflict with other projects/users that might depend on it.

Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/Makefile                 |  2 +-
 ...um.dts => sdm845-xiaomi-beryllium-common.dtsi} | 11 +++++------
 .../dts/qcom/sdm845-xiaomi-beryllium-tianma.dts   | 15 +++++++++++++++
 3 files changed, 21 insertions(+), 7 deletions(-)
 rename arch/arm64/boot/dts/qcom/{sdm845-xiaomi-beryllium.dts => sdm845-xiaomi-beryllium-common.dtsi} (98%)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1d86a33de528..d0bba59d2a8c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -128,7 +128,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-oneplus-fajita.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-akari.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-akatsuki.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-apollo.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium-tianma.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-polaris.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
similarity index 98%
rename from arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
rename to arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 82c27f90d300..940ac9cd0aba 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -26,8 +26,6 @@
 /delete-node/ &rmtfs_mem;
 
 / {
-	model = "Xiaomi Pocophone F1";
-	compatible = "xiaomi,beryllium", "qcom,sdm845";
 	chassis-type = "handset";
 
 	/* required for bootloader to select correct board */
@@ -221,8 +219,7 @@ &dsi0 {
 	status = "okay";
 	vdda-supply = <&vreg_l26a_1p2>;
 
-	panel@0 {
-		compatible = "tianma,fhd-video";
+	display_panel: panel@0 {
 		reg = <0>;
 		vddio-supply = <&vreg_l14a_1p8>;
 		vddpos-supply = <&lab>;
@@ -234,8 +231,10 @@ panel@0 {
 		backlight = <&pmi8998_wled>;
 		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
 
+		status = "disabled";
+
 		port {
-			tianma_nt36672a_in_0: endpoint {
+			panel_in_0: endpoint {
 				remote-endpoint = <&dsi0_out>;
 			};
 		};
@@ -243,7 +242,7 @@ tianma_nt36672a_in_0: endpoint {
 };
 
 &dsi0_out {
-	remote-endpoint = <&tianma_nt36672a_in_0>;
+	remote-endpoint = <&panel_in_0>;
 	data-lanes = <0 1 2 3>;
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
new file mode 100644
index 000000000000..8e176111e599
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "sdm845-xiaomi-beryllium-common.dtsi"
+
+/ {
+	model = "Xiaomi Pocophone F1 (Tianma)";
+	compatible = "xiaomi,beryllium", "qcom,sdm845";
+};
+
+&display_panel {
+	compatible = "tianma,fhd-video";
+	status = "okay";
+};
-- 
2.37.3