linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: soc@kernel.org, Arnd Bergmann <arnd@arndb.de>,
	Olof Johansson <olof@lixom.net>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Masami Hiramatsu <mhiramat@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH v3 04/10] arm64: dts: uniphier: Rename gpio-hog nodes
Date: Tue, 13 Sep 2022 13:23:15 +0900	[thread overview]
Message-ID: <20220913042321.4817-5-hayashi.kunihiko@socionext.com> (raw)
In-Reply-To: <20220913042321.4817-1-hayashi.kunihiko@socionext.com>

According to gpio-hog schema, should add the suffix "-hog" to the node
names including gpio-hog to fix the following warning.

  uniphier-ld11-ref.dtb: gpio@55000000: 'xirq0' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+'
      From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml

This applies to the devicetre for LD11, LD20 and PXs3 SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts     | 2 +-
 arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts | 4 ++--
 arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts     | 2 +-
 arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts     | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
index 617d2b1e9b1e..41b47f5d2ed7 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -51,7 +51,7 @@ &serial0 {
 };
 
 &gpio {
-	xirq0 {
+	xirq0-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
 		input;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
index aa159a11292c..b55b70ded015 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
@@ -168,12 +168,12 @@ &pcie {
 
 &gpio {
 	/* IRQs for Max3421 */
-	xirq0 {
+	xirq0-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(0) 1>;
 		input;
 	};
-	xirq10 {
+	xirq10-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(10) 1>;
 		input;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index 39ee279a1eb9..8c111588c9a1 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -51,7 +51,7 @@ &serial0 {
 };
 
 &gpio {
-	xirq0 {
+	xirq0-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
 		input;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
index 086040306fb3..feb070f934e9 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -68,7 +68,7 @@ &serial3 {
 };
 
 &gpio {
-	xirq4 {
+	xirq4-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
 		input;
-- 
2.25.1


  parent reply	other threads:[~2022-09-13  4:28 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-13  4:23 [PATCH v3 00/10] Update UniPhier armv8 devicetree Kunihiko Hayashi
2022-09-13  4:23 ` [PATCH v3 01/10] arm64: dts: uniphier: Rename pvtctl node to thermal-sensor Kunihiko Hayashi
2022-09-13  4:23 ` [PATCH v3 02/10] arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller Kunihiko Hayashi
2022-09-13  4:23 ` [PATCH v3 03/10] arm64: dts: uniphier: Rename usb-glue node for USB3 " Kunihiko Hayashi
2022-09-13  4:23 ` Kunihiko Hayashi [this message]
2022-09-13  4:23 ` [PATCH v3 05/10] arm64: dts: uniphier: Use GIC interrupt definitions Kunihiko Hayashi
2022-09-13  4:23 ` [PATCH v3 06/10] arm64: dts: uniphier: Add ahci controller nodes for PXs3 Kunihiko Hayashi
2022-09-13  4:23 ` [PATCH v3 07/10] arm64: dts: uniphier: Add USB-device support for PXs3 reference board Kunihiko Hayashi
2022-09-13  4:23 ` [PATCH v3 08/10] arm64: dts: uniphier: Fix opp-table node name for LD20 Kunihiko Hayashi
2022-09-13  4:23 ` [PATCH v3 09/10] arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node Kunihiko Hayashi
2022-09-13  4:23 ` [PATCH v3 10/10] arm64: dts: uniphier: Add L2 cache node Kunihiko Hayashi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220913042321.4817-5-hayashi.kunihiko@socionext.com \
    --to=hayashi.kunihiko@socionext.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mhiramat@kernel.org \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).