[PATCH v2 3/3] clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs

[Rajendra Nayak <quic_rjendra@quicinc.com>]

The USB controllers on sc7280 do not retain the state when
the system goes into low power state and the GDSCs are
turned off. This results in the controllers reinitializing and
re-enumerating all the connected devices (resulting in additional
delay while coming out of suspend)
Fix this by updating the .pwrsts for the USB GDSCs so they only
transition to retention state in low power.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
v2:
*Updated the changelog
*Updated .pwrsts for gcc_usb30_sec_gdsc

 drivers/clk/qcom/gcc-sc7280.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
index 7ff64d4d5920..7b6e5a86c11f 100644
--- a/drivers/clk/qcom/gcc-sc7280.c
+++ b/drivers/clk/qcom/gcc-sc7280.c
@@ -3126,7 +3126,7 @@ static struct gdsc gcc_usb30_prim_gdsc = {
 	.pd = {
 		.name = "gcc_usb30_prim_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = VOTABLE,
 };
 
@@ -3135,7 +3135,7 @@ static struct gdsc gcc_usb30_sec_gdsc = {
 	.pd = {
 		.name = "gcc_usb30_sec_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = VOTABLE,
 };
 
-- 
2.17.1