From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@kernel.org>
X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
	aws-us-west-2-korg-lkml-1.web.codeaurora.org
Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
	by smtp.lore.kernel.org (Postfix) with ESMTP id 787E8C6FA82
	for <linux-kernel@archiver.kernel.org>; Sun, 18 Sep 2022 03:44:52 +0000 (UTC)
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S229676AbiIRDos (ORCPT <rfc822;linux-kernel@archiver.kernel.org>);
        Sat, 17 Sep 2022 23:44:48 -0400
Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56122 "EHLO
        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S229496AbiIRDof (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Sat, 17 Sep 2022 23:44:35 -0400
Received: from wout5-smtp.messagingengine.com (wout5-smtp.messagingengine.com [64.147.123.21])
        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5A9FDC04;
        Sat, 17 Sep 2022 20:44:33 -0700 (PDT)
Received: from compute3.internal (compute3.nyi.internal [10.202.2.43])
        by mailout.west.internal (Postfix) with ESMTP id 094DF32009A1;
        Sat, 17 Sep 2022 23:44:31 -0400 (EDT)
Received: from mailfrontend1 ([10.202.2.162])
  by compute3.internal (MEProxy); Sat, 17 Sep 2022 23:44:32 -0400
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=maxfierke.com;
         h=cc:cc:content-transfer-encoding:date:date:from:from
        :in-reply-to:in-reply-to:message-id:mime-version:references
        :reply-to:sender:subject:subject:to:to; s=fm2; t=1663472671; x=
        1663559071; bh=WJEEJfSNbdBAJEMqOdqwQyCDj6VXhdsd7pte4aCp22A=; b=4
        Y2CPAIK2lXngjg/ZgV/zWTSEXXmjQINUfL8ylCDIxiyMu9416AdHZYgt0zNo5omy
        HEc0iF1PgEC0uswyfOdtgLFWGPk5UQe+XxxyVphSLE2T18A/EC22zBITBFNU+LyI
        XmE8daTgYpYiNhkBP+sEjiajpQm4+RswrcLtfKnu+gWlN+JzH/y0+bLS/ctsdw2t
        MayUqien4E+kHZyuaJhfqZkmcM0qGD6RflOrw3k3pgimsHcTf8aWhvFAf1wfgCnp
        bdRaULTOLMuYazuP4CHFM2Ds3aWHFB4ycrXMdLhxN05GVwp/COjcOcqvvniYP2N1
        9QAM6KaVphpN8IJv+2qkw==
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=
        messagingengine.com; h=cc:cc:content-transfer-encoding:date:date
        :feedback-id:feedback-id:from:from:in-reply-to:in-reply-to
        :message-id:mime-version:references:reply-to:sender:subject
        :subject:to:to:x-me-proxy:x-me-proxy:x-me-sender:x-me-sender
        :x-sasl-enc; s=fm2; t=1663472671; x=1663559071; bh=WJEEJfSNbdBAJ
        EMqOdqwQyCDj6VXhdsd7pte4aCp22A=; b=1Zn7LoVVlPNrgHBY4dlhr6Q0EiNtF
        20VQafhRkfLaOmC7wrurYeHjg4K+enHe8S5GHVWYl6lG766KR5Ko5dKWiKA1X0Pc
        kA/4RFLSnWJOybvQSYsJcYmWrFbFE8PJ/V1hIcj12CU4JhzdlvUTcRwYLNPfbRnY
        Ghp+EE4KZFNTmfovmIO75li6YEsKb6Is6tMcypGxUhdqKZm+zQjFqTPQDD2EO0oA
        svTdpuoJ1WS8TZcj75GzCgTphpOuP5n5ipo/OggGC2h6JwFqX/pVAJ3JSbbtGPcT
        E3JX9tNwaoS0yp4E826zxueu1hGYF4gQyxR8isAnp+humm9w0jfeXrAaA==
X-ME-Sender: <xms:H5QmYwej-ZgnjEgoxaAUHOpBkY8Ead6B64wh5gJaglhpk0uSk_rSSA>
    <xme:H5QmYyPQLA_GmTsAKwO1fS3Px6Vre_FzHjjM6hmWZIVGOpAomSan1aujSEUHz0f-Y
    ZFOx73F5pJB75SBoBU>
X-ME-Received: <xmr:H5QmYxhpuOoZqPA4ITwctFMhzQFrnFeQQO97dZlnLicNdhl6BjUALfD-s5bZ5E601BRZJzKnzQeST8Ja-r6GIdqCX150sC4cUMpvjldKZZejB7cgfQ>
X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrfedvfedgjeehucetufdoteggodetrfdotf
    fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen
    uceurghilhhouhhtmecufedttdenucenucfjughrpefhvfevufffkffojghfggfgsedtke
    ertdertddtnecuhfhrohhmpeforgigucfhihgvrhhkvgcuoehmrgigsehmrgigfhhivghr
    khgvrdgtohhmqeenucggtffrrghtthgvrhhnpeejleekledutdeigeehuddvtedujeeivd
    efveekueehvdeuuedufeeuteeffeevvdenucffohhmrghinhepghhithhhuhgsrdgtohhm
    necuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehmrghilhhfrhhomhepmhgrgi
    esmhgrgihfihgvrhhkvgdrtghomh
X-ME-Proxy: <xmx:H5QmY1-785WoyWkT7RQ2yAyYLU33-26voSesUfNKzgMwkXEe6OTu5g>
    <xmx:H5QmY8vl9SwtOR2Ife6HDX8zwkg3QEYu1youS9sLLlUYmQ-iNJ31Jg>
    <xmx:H5QmY8HVMXPrZeUq-t48wNoTUe3OkfhtQRLskhlJB2pvJgsAwOWyzQ>
    <xmx:H5QmY9ENyd1dhINilOGunSYVJ3iShx1dx_mw_5EU5359TNA8iqOFtA>
Feedback-ID: idee9475d:Fastmail
Received: by mail.messagingengine.com (Postfix) with ESMTPA; Sat,
 17 Sep 2022 23:44:30 -0400 (EDT)
From:   Max Fierke <max@maxfierke.com>
To:     thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie,
        daniel@ffwll.ch, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org
Cc:     dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Max Fierke <max@maxfierke.com>
Subject: [PATCH v3 3/4] drm: panel: Add driver for ClockworkPi cwd686 panel
Date:   Sat, 17 Sep 2022 22:44:14 -0500
Message-Id: <20220918034415.74641-4-max@maxfierke.com>
X-Mailer: git-send-email 2.37.2
In-Reply-To: <20220918034415.74641-1-max@maxfierke.com>
References: <20220918034415.74641-1-max@maxfierke.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

The ClockworkPi DevTerm (all models) uses a 6.86" IPS display
of unknown provenance, which uses the Chipone ICNL9707 IC driver.

The display panel I have has two model numbers: TXW686001 and WTL068601G,
but cannot find any manufacturer associated with either, so opting for the
ClockworkPi model number.

This driver is based on the GPL-licensed driver released by ClockworkPi,
authored by Pinfan Zhu, with some additional cleanup, rotation support,
and display sleep re-enabling done by me.

Original driver here for reference: https://github.com/clockworkpi/DevTerm/blob/main/Code/patch/armbian_build_a06/patch/kernel-004-panel.patch
Display IC datasheet provided here: https://github.com/clockworkpi/DevTerm/blob/main/Schematics/ICNL9707_Datasheet.pdf

Signed-off-by: Max Fierke <max@maxfierke.com>
---
Changes in v3:
 - no changes

Changes in v2: (Sam Ravnborg's suggestions)
 - remove some unused properties from definition (e.g. enable_gpio, supply)
 - add missing regulators
 - reorder includes
 - remove redundant ctx->backlight in favor of backlight through drm_panel_of_backlight
 - remove now-unneeded ctx->enabled and enable/disable hooks
 - replace ICNL9707_DCS macro with mipi_dsi_dcs_write_seq
 - use dev_err_probe instead of checking EPROBE_DEFER
 - fixed return type of cwd686_remove to be void following changes to mipi_dsi_driver

 drivers/gpu/drm/panel/Kconfig                 |  12 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-clockworkpi-cwd686.c  | 445 ++++++++++++++++++
 3 files changed, 458 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index a582ddd583c2..e6b3d4f091f9 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -68,6 +68,18 @@ config DRM_PANEL_BOE_TV101WUM_NL6
 	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
 	  45NA WUXGA PANEL DSI Video Mode panel
 
+config DRM_PANEL_CLOCKWORKPI_CWD686
+	tristate "ClockworkPi CWD686 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the ClockworkPi CWD686
+	  ICNL9707-based panel, e.g. as used within the ClockworkPi DevTerm.
+	  The panel has a 480x1280 resolution and uses 24 bit RGB per pixel.
+
+	  To compile this driver as a module, choose M here.
+
 config DRM_PANEL_DSI_CM
 	tristate "Generic DSI command mode panels"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 34e717382dbb..6c3ed2acaa6b 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.
 obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
 obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
 obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
+obj-$(CONFIG_DRM_PANEL_CLOCKWORKPI_CWD686) += panel-clockworkpi-cwd686.o
 obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
diff --git a/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
new file mode 100644
index 000000000000..87d20d784596
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-clockworkpi-cwd686.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Clockwork Tech LLC
+ * Copyright (c) 2021-2022 Max Fierke <max@maxfierke.com>
+ *
+ * Based on Pinfan Zhu's work on panel-cwd686.c for ClockworkPi's 5.10 BSP
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_modes.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+struct cwd686 {
+	struct device *dev;
+	struct drm_panel panel;
+	struct regulator *vci;
+	struct regulator *iovcc;
+	struct gpio_desc *reset_gpio;
+	enum drm_panel_orientation orientation;
+	bool prepared;
+};
+
+static const struct drm_display_mode default_mode = {
+	.clock = 54465,
+	.hdisplay = 480,
+	.hsync_start = 480 + 150,
+	.hsync_end = 480 + 150 + 24,
+	.htotal = 480 + 150 + 24 + 40,
+	.vdisplay = 1280,
+	.vsync_start = 1280 + 12,
+	.vsync_end = 1280 + 12 + 6,
+	.vtotal = 1280 + 12 + 6 + 10,
+};
+
+static inline struct cwd686 *panel_to_cwd686(struct drm_panel *panel)
+{
+	return container_of(panel, struct cwd686, panel);
+}
+
+#define ICNL9707_CMD_CGOUTL 0xB3
+#define ICNL9707_CMD_CGOUTR 0xB4
+#define ICNL9707_P_CGOUT_VGL 0x00
+#define ICNL9707_P_CGOUT_VGH 0x01
+#define ICNL9707_P_CGOUT_HZ 0x02
+#define ICNL9707_P_CGOUT_GND 0x03
+#define ICNL9707_P_CGOUT_GSP1 0x04
+#define ICNL9707_P_CGOUT_GSP2 0x05
+#define ICNL9707_P_CGOUT_GSP3 0x06
+#define ICNL9707_P_CGOUT_GSP4 0x07
+#define ICNL9707_P_CGOUT_GSP5 0x08
+#define ICNL9707_P_CGOUT_GSP6 0x09
+#define ICNL9707_P_CGOUT_GSP7 0x0A
+#define ICNL9707_P_CGOUT_GSP8 0x0B
+#define ICNL9707_P_CGOUT_GCK1 0x0C
+#define ICNL9707_P_CGOUT_GCK2 0x0D
+#define ICNL9707_P_CGOUT_GCK3 0x0E
+#define ICNL9707_P_CGOUT_GCK4 0x0F
+#define ICNL9707_P_CGOUT_GCK5 0x10
+#define ICNL9707_P_CGOUT_GCK6 0x11
+#define ICNL9707_P_CGOUT_GCK7 0x12
+#define ICNL9707_P_CGOUT_GCK8 0x13
+#define ICNL9707_P_CGOUT_GCK9 0x14
+#define ICNL9707_P_CGOUT_GCK10 0x15
+#define ICNL9707_P_CGOUT_GCK11 0x16
+#define ICNL9707_P_CGOUT_GCK12 0x17
+#define ICNL9707_P_CGOUT_GCK13 0x18
+#define ICNL9707_P_CGOUT_GCK14 0x19
+#define ICNL9707_P_CGOUT_GCK15 0x1A
+#define ICNL9707_P_CGOUT_GCK16 0x1B
+#define ICNL9707_P_CGOUT_DIR 0x1C
+#define ICNL9707_P_CGOUT_DIRB 0x1D
+#define ICNL9707_P_CGOUT_ECLK_AC 0x1E
+#define ICNL9707_P_CGOUT_ECLK_ACB 0x1F
+#define ICNL9707_P_CGOUT_ECLK_AC2 0x20
+#define ICNL9707_P_CGOUT_ECLK_AC2B 0x21
+#define ICNL9707_P_CGOUT_GCH 0x22
+#define ICNL9707_P_CGOUT_GCL 0x23
+#define ICNL9707_P_CGOUT_XDON 0x24
+#define ICNL9707_P_CGOUT_XDONB 0x25
+
+#define ICNL9707_MADCTL_ML  0x10
+#define ICNL9707_MADCTL_RGB 0x00
+#define ICNL9707_MADCTL_BGR 0x08
+#define ICNL9707_MADCTL_MH  0x04
+
+#define ICNL9707_CMD_PWRCON_VCOM 0xB6
+#define ICNL9707_P_PWRCON_VCOM_0495V 0x0D
+
+#define ICNL9707_CMD_PWRCON_SEQ 0xB7
+#define ICNL9707_CMD_PWRCON_CLK 0xB8
+#define ICNL9707_CMD_PWRCON_BTA 0xB9
+#define ICNL9707_CMD_PWRCON_MODE 0xBA
+#define ICNL9707_CMD_PWRCON_REG 0xBD
+
+#define ICNL9707_CMD_TCON 0xC1
+#define ICNL9707_CMD_TCON2 0xC2
+#define ICNL9707_CMD_TCON3 0xC3
+#define ICNL9707_CMD_SRC_TIM 0xC6
+#define ICNL9707_CMD_SRCCON 0xC7
+#define ICNL9707_CMD_SET_GAMMA 0xC8
+
+#define ICNL9707_CMD_ETC 0xD0
+
+#define ICNL9707_CMD_PASSWORD1 0xF0
+#define ICNL9707_P_PASSWORD1_DEFAULT 0xA5
+#define ICNL9707_P_PASSWORD1_ENABLE_LVL2 0x5A
+
+#define ICNL9707_CMD_PASSWORD2 0xF1
+#define ICNL9707_P_PASSWORD2_DEFAULT 0x5A
+#define ICNL9707_P_PASSWORD2_ENABLE_LVL2 0xA5
+
+static int cwd686_init_sequence(struct cwd686 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int err;
+
+	/* Enable access to Level 2 registers */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD1,
+		     ICNL9707_P_PASSWORD1_ENABLE_LVL2,
+		     ICNL9707_P_PASSWORD1_ENABLE_LVL2);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD2,
+		     ICNL9707_P_PASSWORD2_ENABLE_LVL2,
+		     ICNL9707_P_PASSWORD2_ENABLE_LVL2);
+
+	/* Set PWRCON_VCOM (-0.495V, -0.495V) */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_VCOM,
+		     ICNL9707_P_PWRCON_VCOM_0495V,
+		     ICNL9707_P_PWRCON_VCOM_0495V);
+
+	/* Map ASG output signals */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_CGOUTR,
+		     ICNL9707_P_CGOUT_GSP7, ICNL9707_P_CGOUT_GSP5,
+		     ICNL9707_P_CGOUT_GCK7, ICNL9707_P_CGOUT_GCK5,
+		     ICNL9707_P_CGOUT_GCK3, ICNL9707_P_CGOUT_GCK1,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GSP1, ICNL9707_P_CGOUT_GSP3);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_CGOUTL,
+		     ICNL9707_P_CGOUT_GSP8, ICNL9707_P_CGOUT_GSP6,
+		     ICNL9707_P_CGOUT_GCK8, ICNL9707_P_CGOUT_GCK6,
+		     ICNL9707_P_CGOUT_GCK4, ICNL9707_P_CGOUT_GCK2,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_VGL,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_VGL, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GND, ICNL9707_P_CGOUT_GND,
+		     ICNL9707_P_CGOUT_GSP2, ICNL9707_P_CGOUT_GSP4);
+
+	/* Undocumented commands provided by the vendor */
+	mipi_dsi_dcs_write_seq(dsi, 0xB0, 0x54, 0x32, 0x23, 0x45, 0x44, 0x44, 0x44, 0x44, 0x90, 0x01, 0x90, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0xB1, 0x32, 0x84, 0x02, 0x83, 0x30, 0x01, 0x6B, 0x01);
+	mipi_dsi_dcs_write_seq(dsi, 0xB2, 0x73);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_REG,
+		     0x4E, 0x0E, 0x50, 0x50, 0x26,
+		     0x1D, 0x00, 0x14, 0x42, 0x03);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_SEQ,
+		     0x01, 0x01, 0x09, 0x11, 0x0D, 0x55,
+		     0x19, 0x19, 0x21, 0x1D, 0x00, 0x00,
+		     0x00, 0x00, 0x02, 0xFF, 0x3C);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_CLK, 0x23, 0x01, 0x30, 0x34, 0x63);
+
+	/* Disable abnormal power-off flag */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_BTA, 0xA0, 0x22, 0x00, 0x44);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PWRCON_MODE, 0x12, 0x63);
+
+	/* Set VBP, VFP, VSW, HBP, HFP, HSW */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON, 0x0C, 0x16, 0x04, 0x0C, 0x10, 0x04);
+
+	/* Set resolution */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON2, 0x11, 0x41);
+
+	/* Set frame blanking */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_TCON3, 0x22, 0x31, 0x04);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SRCCON, 0x05, 0x23, 0x6B, 0x49, 0x00);
+
+	/* Another undocumented command */
+	mipi_dsi_dcs_write_seq(dsi, 0xC5, 0x00);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_ETC, 0x37, 0xFF, 0xFF);
+
+	/* Another set of undocumented commands */
+	mipi_dsi_dcs_write_seq(dsi, 0xD2, 0x63, 0x0B, 0x08, 0x88);
+	mipi_dsi_dcs_write_seq(dsi, 0xD3, 0x01, 0x00, 0x00, 0x01, 0x01, 0x37, 0x25, 0x38, 0x31, 0x06, 0x07);
+
+	/* Set Gamma to 2.2 */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SET_GAMMA,
+		     0x7C, 0x6A, 0x5D, 0x53, 0x53, 0x45, 0x4B,
+		     0x35, 0x4D, 0x4A, 0x49, 0x66, 0x53, 0x57,
+		     0x4A, 0x48, 0x3B, 0x2A, 0x06, 0x7C, 0x6A,
+		     0x5D, 0x53, 0x53, 0x45, 0x4B, 0x35, 0x4D,
+		     0x4A, 0x49, 0x66, 0x53, 0x57, 0x4A, 0x48,
+		     0x3B, 0x2A, 0x06);
+
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_SRC_TIM, 0x00, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0x00);
+
+	/* Another undocumented command */
+	mipi_dsi_dcs_write_seq(dsi, 0xF4, 0x08, 0x77);
+
+	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE,
+		     ICNL9707_MADCTL_RGB | ICNL9707_MADCTL_ML | ICNL9707_MADCTL_MH);
+
+	/* Enable tearing mode at VBLANK */
+	err = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	if (err) {
+		dev_err(ctx->dev, "failed to enable vblank TE (%d)\n", err);
+		return err;
+	}
+
+	/* Disable access to Level 2 registers */
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD2,
+		     ICNL9707_P_PASSWORD2_DEFAULT,
+		     ICNL9707_P_PASSWORD2_DEFAULT);
+	mipi_dsi_dcs_write_seq(dsi, ICNL9707_CMD_PASSWORD1,
+		     ICNL9707_P_PASSWORD1_DEFAULT,
+		     ICNL9707_P_PASSWORD1_DEFAULT);
+
+	return 0;
+}
+
+static int cwd686_unprepare(struct drm_panel *panel)
+{
+	struct cwd686 *ctx = panel_to_cwd686(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int err;
+
+	if (!ctx->prepared)
+		return 0;
+
+	err = mipi_dsi_dcs_set_display_off(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to turn display off (%d)\n", err);
+		return err;
+	}
+
+	err = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to enter sleep mode (%d)\n", err);
+		return err;
+	}
+
+	msleep(120);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+
+	regulator_disable(ctx->iovcc);
+	regulator_disable(ctx->vci);
+
+	ctx->prepared = false;
+
+	return 0;
+}
+
+static int cwd686_prepare(struct drm_panel *panel)
+{
+	struct cwd686 *ctx = panel_to_cwd686(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int err;
+
+	if (ctx->prepared)
+		return 0;
+
+	err = regulator_enable(ctx->vci);
+	if (err < 0) {
+		dev_err(ctx->dev, "failed to enable vci supply: %d\n", err);
+		return err;
+	}
+	err = regulator_enable(ctx->iovcc);
+	if (err < 0) {
+		dev_err(ctx->dev, "failed to enable iovcc supply: %d\n", err);
+		goto disable_vci;
+	}
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	/* T2 */
+	msleep(10);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	/* T3 */
+	msleep(20);
+
+	/* Exit sleep mode and power on */
+
+	err = cwd686_init_sequence(ctx);
+	if (err) {
+		dev_err(ctx->dev, "failed to initialize display (%d)\n", err);
+		goto disable_iovcc;
+	}
+
+	err = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to exit sleep mode (%d)\n", err);
+		goto disable_iovcc;
+	}
+	/* T6 */
+	msleep(120);
+
+	err = mipi_dsi_dcs_set_display_on(dsi);
+	if (err) {
+		dev_err(ctx->dev, "failed to turn display on (%d)\n", err);
+		goto disable_iovcc;
+	}
+	msleep(20);
+
+	ctx->prepared = true;
+
+	return 0;
+disable_iovcc:
+	regulator_disable(ctx->iovcc);
+disable_vci:
+	regulator_disable(ctx->vci);
+	return err;
+}
+
+static int cwd686_get_modes(struct drm_panel *panel, struct drm_connector *connector)
+{
+	struct cwd686 *ctx = panel_to_cwd686(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &default_mode);
+	if (!mode) {
+		dev_err(panel->dev, "bad mode or failed to add mode\n");
+		return -EINVAL;
+	}
+	drm_mode_set_name(mode);
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+	/* Set up connector's "panel orientation" property */
+	drm_connector_set_panel_orientation(connector, ctx->orientation);
+
+	drm_mode_probed_add(connector, mode);
+
+	return 1; /* Number of modes */
+}
+
+static const struct drm_panel_funcs cwd686_drm_funcs = {
+	.unprepare = cwd686_unprepare,
+	.prepare = cwd686_prepare,
+	.get_modes = cwd686_get_modes,
+};
+
+static int cwd686_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct cwd686 *ctx;
+	int err;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+			  MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio)) {
+		err = PTR_ERR(ctx->reset_gpio);
+		return dev_err_probe(dev, err, "Failed to request GPIO (%d)\n", err);
+	}
+
+	ctx->vci = devm_regulator_get(dev, "vci");
+	if (IS_ERR(ctx->vci)) {
+		err = PTR_ERR(ctx->vci);
+		return dev_err_probe(dev, err, "Failed to request vci regulator: %d\n", err);
+	}
+
+	ctx->iovcc = devm_regulator_get(dev, "iovcc");
+	if (IS_ERR(ctx->iovcc)) {
+		err = PTR_ERR(ctx->iovcc);
+		return dev_err_probe(dev, err, "Failed to request iovcc regulator: %d\n", err);
+	}
+
+	err = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
+	if (err) {
+		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err);
+		return err;
+	}
+
+	drm_panel_init(&ctx->panel, dev, &cwd686_drm_funcs, DRM_MODE_CONNECTOR_DSI);
+
+	err = drm_panel_of_backlight(&ctx->panel);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to get backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	err = mipi_dsi_attach(dsi);
+	if (err < 0) {
+		dev_err(dev, "mipi_dsi_attach() failed: %d\n", err);
+		drm_panel_remove(&ctx->panel);
+		return err;
+	}
+
+	return 0;
+}
+
+static void cwd686_remove(struct mipi_dsi_device *dsi)
+{
+	struct cwd686 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id cwd686_of_match[] = {
+	{ .compatible = "clockworkpi,cwd686" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cwd686_of_match);
+
+static struct mipi_dsi_driver cwd686_driver = {
+	.probe = cwd686_probe,
+	.remove = cwd686_remove,
+	.driver = {
+		.name = "panel-clockworkpi-cwd686",
+		.of_match_table = cwd686_of_match,
+	},
+};
+module_mipi_dsi_driver(cwd686_driver);
+
+MODULE_AUTHOR("Pinfan Zhu <zhu@clockworkpi.com>");
+MODULE_AUTHOR("Max Fierke <max@maxfierke.com>");
+MODULE_DESCRIPTION("ClockworkPi CWD686 panel driver");
+MODULE_LICENSE("GPL");
-- 
2.37.2