[PATCH v1 22/30] pinctrl: Create subdirectory for StarFive drivers

[Hal Feng <hal.feng@linux.starfivetech.com>]

From: Jianlong Huang <jianlong.huang@starfivetech.com>

Move the StarFive JH7100 pinctrl driver to a new subdirectory
in preparation for adding more StarFive pinctrl drivers. No
functional change.

Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@linux.starfivetech.com>
---
 drivers/pinctrl/Kconfig                       | 18 +-----------------
 drivers/pinctrl/Makefile                      |  2 +-
 drivers/pinctrl/starfive/Kconfig              | 19 +++++++++++++++++++
 drivers/pinctrl/starfive/Makefile             |  3 +++
 .../pinctrl/{ => starfive}/pinctrl-starfive.c |  8 ++++----
 5 files changed, 28 insertions(+), 22 deletions(-)
 create mode 100644 drivers/pinctrl/starfive/Kconfig
 create mode 100644 drivers/pinctrl/starfive/Makefile
 rename drivers/pinctrl/{ => starfive}/pinctrl-starfive.c (99%)

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 1cf74b0c42e5..5abf1961f4d4 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -412,23 +412,6 @@ config PINCTRL_ST
 	select PINCONF
 	select GPIOLIB_IRQCHIP
 
-config PINCTRL_STARFIVE
-	tristate "Pinctrl and GPIO driver for the StarFive JH7100 SoC"
-	depends on SOC_STARFIVE || COMPILE_TEST
-	depends on OF
-	default SOC_STARFIVE
-	select GENERIC_PINCTRL_GROUPS
-	select GENERIC_PINMUX_FUNCTIONS
-	select GENERIC_PINCONF
-	select GPIOLIB
-	select GPIOLIB_IRQCHIP
-	select OF_GPIO
-	help
-	  Say yes here to support pin control on the StarFive JH7100 SoC.
-	  This also provides an interface to the GPIO pins not used by other
-	  peripherals supporting inputs, outputs, configuring pull-up/pull-down
-	  and interrupts on input changes.
-
 config PINCTRL_STMFX
 	tristate "STMicroelectronics STMFX GPIO expander pinctrl driver"
 	depends on I2C
@@ -526,6 +509,7 @@ source "drivers/pinctrl/renesas/Kconfig"
 source "drivers/pinctrl/samsung/Kconfig"
 source "drivers/pinctrl/spear/Kconfig"
 source "drivers/pinctrl/sprd/Kconfig"
+source "drivers/pinctrl/starfive/Kconfig"
 source "drivers/pinctrl/stm32/Kconfig"
 source "drivers/pinctrl/sunplus/Kconfig"
 source "drivers/pinctrl/sunxi/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index e76f5cdc64b0..eccd4d568a3d 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -43,7 +43,6 @@ obj-$(CONFIG_PINCTRL_RK805)	+= pinctrl-rk805.o
 obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
-obj-$(CONFIG_PINCTRL_STARFIVE)	+= pinctrl-starfive.o
 obj-$(CONFIG_PINCTRL_STMFX) 	+= pinctrl-stmfx.o
 obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
@@ -70,6 +69,7 @@ obj-$(CONFIG_PINCTRL_RENESAS)	+= renesas/
 obj-$(CONFIG_PINCTRL_SAMSUNG)	+= samsung/
 obj-$(CONFIG_PINCTRL_SPEAR)	+= spear/
 obj-y				+= sprd/
+obj-$(CONFIG_SOC_STARFIVE)	+= starfive/
 obj-$(CONFIG_PINCTRL_STM32)	+= stm32/
 obj-y				+= sunplus/
 obj-$(CONFIG_PINCTRL_SUNXI)	+= sunxi/
diff --git a/drivers/pinctrl/starfive/Kconfig b/drivers/pinctrl/starfive/Kconfig
new file mode 100644
index 000000000000..ed8c6a920886
--- /dev/null
+++ b/drivers/pinctrl/starfive/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config PINCTRL_STARFIVE
+	tristate "Pinctrl and GPIO driver for the StarFive JH7100 SoC"
+	depends on SOC_STARFIVE || COMPILE_TEST
+	depends on OF
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select GENERIC_PINCONF
+	select GPIOLIB
+	select GPIOLIB_IRQCHIP
+	select OF_GPIO
+	default SOC_STARFIVE
+	help
+	  Say yes here to support pin control on the StarFive JH7100 SoC.
+	  This also provides an interface to the GPIO pins not used by other
+	  peripherals supporting inputs, outputs, configuring pull-up/pull-down
+	  and interrupts on input changes.
+
diff --git a/drivers/pinctrl/starfive/Makefile b/drivers/pinctrl/starfive/Makefile
new file mode 100644
index 000000000000..4c96e2f86292
--- /dev/null
+++ b/drivers/pinctrl/starfive/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_PINCTRL_STARFIVE)	+= pinctrl-starfive.o
diff --git a/drivers/pinctrl/pinctrl-starfive.c b/drivers/pinctrl/starfive/pinctrl-starfive.c
similarity index 99%
rename from drivers/pinctrl/pinctrl-starfive.c
rename to drivers/pinctrl/starfive/pinctrl-starfive.c
index 3eb40e230d98..74a084740e8c 100644
--- a/drivers/pinctrl/pinctrl-starfive.c
+++ b/drivers/pinctrl/starfive/pinctrl-starfive.c
@@ -22,10 +22,10 @@
 
 #include <dt-bindings/pinctrl/pinctrl-starfive.h>
 
-#include "core.h"
-#include "pinctrl-utils.h"
-#include "pinmux.h"
-#include "pinconf.h"
+#include "../core.h"
+#include "../pinctrl-utils.h"
+#include "../pinmux.h"
+#include "../pinconf.h"
 
 #define DRIVER_NAME "pinctrl-starfive"
 
-- 
2.17.1