From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: "Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH] ARM: dts: ti: correct indentation
Date: Sun, 2 Oct 2022 11:20:10 +0200 [thread overview]
Message-ID: <20221002092010.69030-1-krzysztof.kozlowski@linaro.org> (raw)
Do not use spaces for indentation.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../arm/boot/dts/am335x-moxa-uc-2100-common.dtsi | 10 +++++-----
.../arm/boot/dts/am335x-moxa-uc-8100-common.dtsi | 10 +++++-----
arch/arm/boot/dts/am335x-pepper.dts | 4 ++--
arch/arm/boot/dts/am3517-evm.dts | 16 ++++++++--------
4 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 7b40ca9483ca..49e280b42442 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -16,11 +16,11 @@ vbat: vbat-regulator {
/* Power supply provides a fixed 3.3V @3A */
vmmcsd_fixed: vmmcsd-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vmmcsd_fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
};
buttons: push_button {
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index e0364adb8393..7d00e8b20f18 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -21,11 +21,11 @@ vbat: vbat-regulator {
/* Power supply provides a fixed 3.3V @3A */
vmmcsd_fixed: vmmcsd-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vmmcsd_fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
};
buttons: push_button {
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 8691eec33b61..a4509e9e1056 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -555,11 +555,11 @@ &usb {
};
&usb0 {
- dr_mode = "host";
+ dr_mode = "host";
};
&usb1 {
- dr_mode = "host";
+ dr_mode = "host";
};
&am33xx_pinmux {
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 35b653014f2b..18c85c112a3e 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -26,12 +26,12 @@ memory@80000000 {
reg = <0x80000000 0x10000000>; /* 256 MB */
};
- vmmc_fixed: vmmc {
- compatible = "regulator-fixed";
- regulator-name = "vmmc_fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
+ vmmc_fixed: vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
gpio-keys {
compatible = "gpio-keys-polled";
@@ -176,7 +176,7 @@ &davinci_emac {
};
&davinci_mdio {
- status = "okay";
+ status = "okay";
};
&dss {
@@ -227,7 +227,7 @@ &mmc1 {
};
&mmc3 {
- status = "disabled";
+ status = "disabled";
};
&usbhshost {
--
2.34.1
next reply other threads:[~2022-10-02 9:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-02 9:20 Krzysztof Kozlowski [this message]
2022-10-26 16:57 ` [PATCH] ARM: dts: ti: correct indentation Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221002092010.69030-1-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).