2022-10-05 05:00:38 make -C thermal run_tests make: Entering directory '/lkp/benchmarks/pm-qa/thermal' ### ### thermal_00: ### list existing thermal-zones and cooling-devices in the system ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#thermal_00 ### Thermal Zone list ----------------- thermal_zone0 - acpitz thermal_zone1 - acpitz Cooling Device list ------------------- cooling_device0 - Fan cooling_device1 - Fan cooling_device10 - Processor cooling_device11 - Processor cooling_device12 - Processor cooling_device13 - intel_powerclamp cooling_device2 - Fan cooling_device3 - Fan cooling_device4 - Fan cooling_device5 - Processor ### ### thermal_01: ### test/verify the thermal zone files are present in the sysfs and check the validity of the mode field, bindings and trip temperatures ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/PmQaSpecification#thermal_01 ### thermal_01.0: checking 'mode' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.1: checking 'temp' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.2: checking 'type' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.4: checking 'thermal_zone0'/'temp' ='27800'... Ok thermal_01.0: checking 'mode' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.1: checking 'temp' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.2: checking 'type' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.4: checking 'thermal_zone1'/'temp' ='29800'... Ok thermal_01.0: checking thermal_zone0 cur_mode=enabled... Ok thermal_01.1: checking thermal_zone0 cur_mode=disabled... Ok thermal_01.0: checking thermal_zone1 cur_mode=enabled... Ok thermal_01.1: checking thermal_zone1 cur_mode=disabled... Ok thermal_01.2: checking 'trip_point_0_temp' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.3: checking 'trip_point_0_type' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.4: checking 'thermal_zone0'/'trip_point_0_temp' ='105000'... Ok thermal_01.5: checking 'trip_point_1_temp' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.6: checking 'trip_point_1_type' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.7: checking 'thermal_zone0'/'trip_point_1_temp' ='80000'... Ok thermal_01.8: checking 'trip_point_2_temp' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.9: checking 'trip_point_2_type' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.10: checking 'thermal_zone0'/'trip_point_2_temp' ='55000'... Ok thermal_01.11: checking 'trip_point_0_temp' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.12: checking 'trip_point_0_type' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.13: checking 'thermal_zone1'/'trip_point_0_temp' ='105000'... Ok thermal_01.14: checking 'trip_point_1_temp' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.15: checking 'trip_point_1_type' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.16: checking 'thermal_zone1'/'trip_point_1_temp' ='108000'... Ok thermal_01.17: checking 'cdev0_trip_point' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.18: checking 'thermal_zone0/cdev0_trip_point' valid binding... Err thermal_01.19: checking 'cdev4_trip_point' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.20: checking 'thermal_zone0/cdev4_trip_point' valid binding... Ok thermal_01.21: checking 'cdev4_trip_point' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.22: checking 'thermal_zone0/cdev4_trip_point' valid binding... Ok thermal_01.23: checking 'cdev4_trip_point' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.24: checking 'thermal_zone0/cdev4_trip_point' valid binding... Ok thermal_01.25: checking 'cdev4_trip_point' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.26: checking 'thermal_zone0/cdev4_trip_point' valid binding... Ok thermal_01.27: checking 'cdev0_trip_point' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.28: checking 'thermal_zone1/cdev0_trip_point' valid binding... Ok thermal_01.29: checking 'cdev3_trip_point' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.30: checking 'thermal_zone1/cdev3_trip_point' valid binding... Ok thermal_01.31: checking 'cdev3_trip_point' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.32: checking 'thermal_zone1/cdev3_trip_point' valid binding... Ok thermal_01.33: checking 'cdev3_trip_point' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.34: checking 'thermal_zone1/cdev3_trip_point' valid binding... Ok thermal_01.35: checking 'cdev3_trip_point' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.36: checking 'thermal_zone1/cdev3_trip_point' valid binding... Ok thermal_01.37: checking 'cdev3_trip_point' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.38: checking 'thermal_zone1/cdev3_trip_point' valid binding... Ok thermal_01: fail ### ### thermal_02: ### test/verify the cooling device files are present in the sysfs ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/PmQaSpecification#thermal_02 ### thermal_02.0: checking 'cur_state' exists in '/sys/devices/virtual/thermal/cooling_device0'... Ok thermal_02.1: checking 'max_state' exists in '/sys/devices/virtual/thermal/cooling_device0'... Ok thermal_02.2: checking 'type' exists in '/sys/devices/virtual/thermal/cooling_device0'... Ok thermal_02.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/cooling_device0'... Ok thermal_02.0: checking 'cur_state' exists in '/sys/devices/virtual/thermal/cooling_device1'... Ok thermal_02.1: checking 'max_state' exists in '/sys/devices/virtual/thermal/cooling_device1'... Ok thermal_02.2: checking 'type' exists in '/sys/devices/virtual/thermal/cooling_device1'... Ok thermal_02.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/cooling_device1'... Ok thermal_02.0: checking 'cur_state' exists in '/sys/devices/virtual/thermal/cooling_device10'... Ok thermal_02.1: checking 'max_state' exists in '/sys/devices/virtual/thermal/cooling_device10'... Ok thermal_02.2: checking 'type' exists in '/sys/devices/virtual/thermal/cooling_device10'... Ok thermal_02.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/cooling_device10'... Ok thermal_02.0: checking 'cur_state' exists in '/sys/devices/virtual/thermal/cooling_device11'... Ok thermal_02.1: checking 'max_state' exists in '/sys/devices/virtual/thermal/cooling_device11'... Ok thermal_02.2: checking 'type' exists in '/sys/devices/virtual/thermal/cooling_device11'... Ok thermal_02.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/cooling_device11'... Ok thermal_02.0: checking 'cur_state' exists in '/sys/devices/virtual/thermal/cooling_device12'... Ok thermal_02.1: checking 'max_state' exists in '/sys/devices/virtual/thermal/cooling_device12'... Ok thermal_02.2: checking 'type' exists in '/sys/devices/virtual/thermal/cooling_device12'... Ok thermal_02.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/cooling_device12'... Ok thermal_02.0: checking 'cur_state' exists in '/sys/devices/virtual/thermal/cooling_device13'... Ok thermal_02.1: checking 'max_state' exists in '/sys/devices/virtual/thermal/cooling_device13'... Ok thermal_02.2: checking 'type' exists in '/sys/devices/virtual/thermal/cooling_device13'... Ok thermal_02.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/cooling_device13'... Ok thermal_02.0: checking 'cur_state' exists in '/sys/devices/virtual/thermal/cooling_device2'... Ok thermal_02.1: checking 'max_state' exists in '/sys/devices/virtual/thermal/cooling_device2'... Ok thermal_02.2: checking 'type' exists in '/sys/devices/virtual/thermal/cooling_device2'... Ok thermal_02.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/cooling_device2'... Ok thermal_02.0: checking 'cur_state' exists in '/sys/devices/virtual/thermal/cooling_device3'... Ok thermal_02.1: checking 'max_state' exists in '/sys/devices/virtual/thermal/cooling_device3'... Ok thermal_02.2: checking 'type' exists in '/sys/devices/virtual/thermal/cooling_device3'... Ok thermal_02.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/cooling_device3'... Ok thermal_02.0: checking 'cur_state' exists in '/sys/devices/virtual/thermal/cooling_device4'... Ok thermal_02.1: checking 'max_state' exists in '/sys/devices/virtual/thermal/cooling_device4'... Ok thermal_02.2: checking 'type' exists in '/sys/devices/virtual/thermal/cooling_device4'... Ok thermal_02.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/cooling_device4'... Ok thermal_02.0: checking 'cur_state' exists in '/sys/devices/virtual/thermal/cooling_device5'... Ok thermal_02.1: checking 'max_state' exists in '/sys/devices/virtual/thermal/cooling_device5'... Ok thermal_02.2: checking 'type' exists in '/sys/devices/virtual/thermal/cooling_device5'... Ok thermal_02.3: checking 'uevent' exists in '/sys/devices/virtual/thermal/cooling_device5'... Ok thermal_02.0: checking cooling_device0 cur_state=0... Ok thermal_02.1: checking cooling_device0 cur_state=1... Ok thermal_02.0: checking cooling_device1 cur_state=0... Ok thermal_02.1: checking cooling_device1 cur_state=1... Ok thermal_02.0: checking cooling_device10 cur_state=0... Ok thermal_02.1: checking cooling_device10 cur_state=1... Ok thermal_02.2: checking cooling_device10 cur_state=2... Ok thermal_02.3: checking cooling_device10 cur_state=3... Ok thermal_02.0: checking cooling_device11 cur_state=0... Ok thermal_02.1: checking cooling_device11 cur_state=1... Ok thermal_02.2: checking cooling_device11 cur_state=2... Ok thermal_02.3: checking cooling_device11 cur_state=3... Ok thermal_02.0: checking cooling_device12 cur_state=0... Ok thermal_02.1: checking cooling_device12 cur_state=1... Ok thermal_02.2: checking cooling_device12 cur_state=2... Ok thermal_02.3: checking cooling_device12 cur_state=3... Ok thermal_02.0: checking cooling_device13 cur_state=0... Err thermal_02.0: checking cooling_device2 cur_state=0... Ok thermal_02.1: checking cooling_device2 cur_state=1... Ok thermal_02.0: checking cooling_device3 cur_state=0... Ok thermal_02.1: checking cooling_device3 cur_state=1... Ok thermal_02.0: checking cooling_device4 cur_state=0... Ok thermal_02.1: checking cooling_device4 cur_state=1... Ok thermal_02.0: checking cooling_device5 cur_state=0... Ok thermal_02.1: checking cooling_device5 cur_state=1... Ok thermal_02.2: checking cooling_device5 cur_state=2... Ok thermal_02.3: checking cooling_device5 cur_state=3... Ok thermal_02: fail ### ### thermal_03: ### test/verify that temperature is increasing/decreasing as the load is increased/decreased ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/PmQaSpecification#thermal_03 ### thermal_03.0: checking start cpu heat binary... Ok start gpu heat binary 1264 ======================================================= glmark2 2021.12 ======================================================= OpenGL Information GL_VENDOR: Intel Open Source Technology Center GL_RENDERER: Mesa DRI Intel(R) HD Graphics 4600 (HSW GT2) GL_VERSION: 3.0 Mesa 20.3.5 Surface Config: buf=32 r=8 g=8 b=8 a=8 depth=24 stencil=8 Surface Size: 800x600 windowed ======================================================= [build] use-vbo=false: Set up failed [build] use-vbo=true: Set up failed [texture] texture-filter=nearest: Set up failed [texture] texture-filter=linear: Set up failed [texture] texture-filter=mipmap: Set up failed [shading] shading=gouraud: Set up failed [shading] shading=blinn-phong-inf: Set up failed [shading] shading=phong: Set up failed [shading] shading=cel: Set up failed [bump] bump-render=high-poly: Set up failed [bump] bump-render=normals: Set up failed [bump] bump-render=height: Set up failed [effect2d] kernel=0,1,0;1,-4,1;0,1,0;: Set up failed [effect2d] kernel=1,1,1,1,1;1,1,1,1,1;1,1,1,1,1;: Set up failed [pulsar] light=false:quads=5:texture=false: Set up failed [desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4:thermal_03.1: checking temperature variation with load... Err thermal_03.0: checking start cpu heat binary... Ok start gpu heat binary 1315 ======================================================= glmark2 2021.12 ======================================================= OpenGL Information GL_VENDOR: Intel Open Source Technology Center GL_RENDERER: Mesa DRI Intel(R) HD Graphics 4600 (HSW GT2) GL_VERSION: 3.0 Mesa 20.3.5 Surface Config: buf=32 r=8 g=8 b=8 a=8 depth=24 stencil=8 Surface Size: 800x600 windowed ======================================================= [build] use-vbo=false: Set up failed [build] use-vbo=true: Set up failed [texture] texture-filter=nearest: Set up failed [texture] texture-filter=linear: Set up failed [texture] texture-filter=mipmap: Set up failed [shading] shading=gouraud: Set up failed [shading] shading=blinn-phong-inf: Set up failed [shading] shading=phong: Set up failed [shading] shading=cel: Set up failed [bump] bump-render=high-poly: Set up failed [bump] bump-render=normals: Set up failed [bump] bump-render=height: Set up failed [effect2d] kernel=0,1,0;1,-4,1;0,1,0;: Set up failed [effect2d] kernel=1,1,1,1,1;1,1,1,1,1;1,1,1,1,1;: Set up failed [pulsar] light=false:quads=5:texture=false: Set up failed [desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4:thermal_03.1: checking temperature variation with load... Err thermal_03: fail ### ### thermal_04: ### test/verify the cooling device are lowering the temperature down ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/PmQaSpecification#thermal_04 ### thermal_04.0: checking cooling_device0:state=1 effective cool=0 ... Ok thermal_04.0: checking cooling_device1:state=1 effective cool=0 ... Ok thermal_04.0: checking cooling_device10:state=1 effective cool=0 ... Ok thermal_04.1: checking cooling_device10:state=2 effective cool=0 ... Ok thermal_04.2: checking cooling_device10:state=3 effective cool=0 ... Ok thermal_04.0: checking cooling_device11:state=1 effective cool=0 ... Ok thermal_04.1: checking cooling_device11:state=2 effective cool=0 ... Ok thermal_04.2: checking cooling_device11:state=3 effective cool=0 ... Ok thermal_04.0: checking cooling_device12:state=1 effective cool=0 ... Ok thermal_04.1: checking cooling_device12:state=2 effective cool=0 ... Ok thermal_04.2: checking cooling_device12:state=3 effective cool=0 ... Ok thermal_04.0: checking cooling_device13:state=1 effective cool=0 ... Ok thermal_04.1: checking cooling_device13:state=2 effective cool=0 ... Ok thermal_04.2: checking cooling_device13:state=3 effective cool=0 ... Ok thermal_04.3: checking cooling_device13:state=4 effective cool=0 ... Ok thermal_04.4: checking cooling_device13:state=5 effective cool=0 ... Ok thermal_04.5: checking cooling_device13:state=6 effective cool=0 ... Ok thermal_04.6: checking cooling_device13:state=7 effective cool=0 ... Ok thermal_04.7: checking cooling_device13:state=8 effective cool=0 ... Ok thermal_04.8: checking cooling_device13:state=9 effective cool=0 ... Ok thermal_04.9: checking cooling_device13:state=10 effective cool=0 ... Ok thermal_04.10: checking cooling_device13:state=11 effective cool=0 ... Ok thermal_04.11: checking cooling_device13:state=12 effective cool=0 ... Ok thermal_04.12: checking cooling_device13:state=13 effective cool=0 ... Ok thermal_04.13: checking cooling_device13:state=14 effective cool=0 ... Ok thermal_04.14: checking cooling_device13:state=15 effective cool=0 ... Ok thermal_04.15: checking cooling_device13:state=16 effective cool=0 ... Ok thermal_04.16: checking cooling_device13:state=17 effective cool=0 ... Ok thermal_04.17: checking cooling_device13:state=18 effective cool=0 ... Ok thermal_04.18: checking cooling_device13:state=19 effective cool=0 ... Ok thermal_04.19: checking cooling_device13:state=20 effective cool=0 ... Ok thermal_04.20: checking cooling_device13:state=21 effective cool=0 ... Ok thermal_04.21: checking cooling_device13:state=22 effective cool=0 ... Ok thermal_04.22: checking cooling_device13:state=23 effective cool=0 ... Ok thermal_04.23: checking cooling_device13:state=24 effective cool=0 ... Ok thermal_04.24: checking cooling_device13:state=25 effective cool=0 ... Ok thermal_04.25: checking cooling_device13:state=26 effective cool=0 ... Ok thermal_04.26: checking cooling_device13:state=27 effective cool=0 ... Ok thermal_04.27: checking cooling_device13:state=28 effective cool=0 ... Ok thermal_04.28: checking cooling_device13:state=29 effective cool=0 ... Ok thermal_04.29: checking cooling_device13:state=30 effective cool=0 ... Ok thermal_04.30: checking cooling_device13:state=31 effective cool=0 ... Ok thermal_04.31: checking cooling_device13:state=32 effective cool=0 ... Ok thermal_04.32: checking cooling_device13:state=33 effective cool=0 ... Ok thermal_04.33: checking cooling_device13:state=34 effective cool=0 ... Ok thermal_04.34: checking cooling_device13:state=35 effective cool=0 ... Ok thermal_04.35: checking cooling_device13:state=36 effective cool=0 ... Ok thermal_04.36: checking cooling_device13:state=37 effective cool=0 ... Ok thermal_04.37: checking cooling_device13:state=38 effective cool=0 ... Ok thermal_04.38: checking cooling_device13:state=39 effective cool=0 ... Ok thermal_04.39: checking cooling_device13:state=40 effective cool=0 ... Ok thermal_04.40: checking cooling_device13:state=41 effective cool=0 ... Ok thermal_04.41: checking cooling_device13:state=42 effective cool=0 ... Ok thermal_04.42: checking cooling_device13:state=43 effective cool=0 ... Ok thermal_04.43: checking cooling_device13:state=44 effective cool=0 ... Ok thermal_04.44: checking cooling_device13:state=45 effective cool=0 ... Ok thermal_04.45: checking cooling_device13:state=46 effective cool=0 ... Ok thermal_04.46: checking cooling_device13:state=47 effective cool=0 ... Ok thermal_04.47: checking cooling_device13:state=48 effective cool=0 ... Ok thermal_04.48: checking cooling_device13:state=49 effective cool=0 ... Ok thermal_04.49: checking cooling_device13:state=50 effective cool=0 ... Ok thermal_04.0: checking cooling_device2:state=1 effective cool=0 ... Ok thermal_04.0: checking cooling_device3:state=1 effective cool=0 ... Ok thermal_04.0: checking cooling_device4:state=1 effective cool=0 ... Ok thermal_04.0: checking cooling_device5:state=1 effective cool=0 ... Ok thermal_04.1: checking cooling_device5:state=2 effective cool=0 ... Ok thermal_04.2: checking cooling_device5:state=3 effective cool=0 ... Ok thermal_04: pass ### ### thermal_05: ### test/verify the cpufreq cooling device are clipping the frequencies ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/PmQaSpecification#thermal_05 ### thermal_05.0: Cannot find cpufreq in cooling_device0...... skip thermal_05.0: Cannot find cpufreq in cooling_device1...... skip thermal_05.0: Cannot find cpufreq in cooling_device10...... skip thermal_05.0: Cannot find cpufreq in cooling_device11...... skip thermal_05.0: Cannot find cpufreq in cooling_device12...... skip thermal_05.0: Cannot find cpufreq in cooling_device13...... skip thermal_05.0: Cannot find cpufreq in cooling_device2...... skip thermal_05.0: Cannot find cpufreq in cooling_device3...... skip thermal_05.0: Cannot find cpufreq in cooling_device4...... skip thermal_05.0: Cannot find cpufreq in cooling_device5...... skip thermal_05: skip ### ### thermal_06: ### test/verify that different trip points are crossed when load is maximum ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/PmQaSpecification#thermal_06 ### thermal_06.0: checking start cpu heat binary... Ok start gpu heat binary 4457 ======================================================= glmark2 2021.12 ======================================================= OpenGL Information GL_VENDOR: Intel Open Source Technology Center GL_RENDERER: Mesa DRI Intel(R) HD Graphics 4600 (HSW GT2) GL_VERSION: 3.0 Mesa 20.3.5 Surface Config: buf=32 r=8 g=8 b=8 a=8 depth=24 stencil=8 Surface Size: 800x600 windowed ======================================================= [build] use-vbo=false: Set up failed [build] use-vbo=true: Set up failed [texture] texture-filter=nearest: Set up failed [texture] texture-filter=linear: Set up failed [texture] texture-filter=mipmap: Set up failed [shading] shading=gouraud: Set up failed [shading] shading=blinn-phong-inf: Set up failed [shading] shading=phong: Set up failed [shading] shading=cel: Set up failed [bump] bump-render=high-poly: Set up failed [bump] bump-render=normals: Set up failed [bump] bump-render=height: Set up failed [effect2d] kernel=0,1,0;1,-4,1;0,1,0;: Set up failed [effect2d] kernel=1,1,1,1,1;1,1,1,1,1;1,1,1,1,1;: Set up failed [pulsar] light=false:quads=5:texture=false: Set up failed [desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4: FPS: 149 FrameTime: 6.711 ms [desktop] effect=shadow:windows=4: FPS: 748 FrameTime: 1.337 ms [buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 278 FrameTime: 3.597 ms [buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=subdata: FPS: 273 FrameTime: 3.663 ms [buffer] columns=200:interleave=true:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 336 FrameTime: 2.976 ms [ideas] speed=duration: Set up failed [jellyfish] : Set up failed [terrain] :thermal_06.0: checking start cpu heat binary... Ok start gpu heat binary 5015 ======================================================= glmark2 2021.12 ======================================================= OpenGL Information GL_VENDOR: Intel Open Source Technology Center GL_RENDERER: Mesa DRI Intel(R) HD Graphics 4600 (HSW GT2) GL_VERSION: 3.0 Mesa 20.3.5 Surface Config: buf=32 r=8 g=8 b=8 a=8 depth=24 stencil=8 Surface Size: 800x600 windowed ======================================================= [build] use-vbo=false: Set up failed [build] use-vbo=true: Set up failed [texture] texture-filter=nearest: Set up failed [texture] texture-filter=linear: Set up failed [texture] texture-filter=mipmap: Set up failed [shading] shading=gouraud: Set up failed [shading] shading=blinn-phong-inf: Set up failed [shading] shading=phong: Set up failed [shading] shading=cel: Set up failed [bump] bump-render=high-poly: Set up failed [bump] bump-render=normals: Set up failed [bump] bump-render=height: Set up failed [effect2d] kernel=0,1,0;1,-4,1;0,1,0;: Set up failed [effect2d] kernel=1,1,1,1,1;1,1,1,1,1;1,1,1,1,1;: Set up failed [pulsar] light=false:quads=5:texture=false: Set up failed [desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4: FPS: 144 FrameTime: 6.944 ms [desktop] effect=shadow:windows=4: FPS: 748 FrameTime: 1.337 ms [buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 272 FrameTime: 3.676 ms [buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=subdata: FPS: 265 FrameTime: 3.774 ms [buffer] columns=200:interleave=true:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 325 FrameTime: 3.077 ms [ideas] speed=duration: Set up failed [jellyfish] : Set up failed [terrain] : thermal_06: pass make: Leaving directory '/lkp/benchmarks/pm-qa/thermal'