linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Cai Huoqing <cai.huoqing@linux.dev>
To: leonro@nvidia.com
Cc: caihuoqing <caihuoqing@baidu.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Qiao Ma <mqaio@linux.alibaba.com>,
	Zhengchao Shao <shaozhengchao@huawei.com>,
	Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
	"Gustavo A. R. Silva" <gustavoars@kernel.org>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] net: hinic: Update the range of MTU from 256 to 9600
Date: Wed, 12 Oct 2022 16:29:40 +0800	[thread overview]
Message-ID: <20221012082945.10353-1-cai.huoqing@linux.dev> (raw)

From: caihuoqing <caihuoqing@baidu.com>

Hinic hardware only support MTU from 256 to 9600, so set
the max_mtu and min_mtu.

And not need to add the validity judgment when set mtu,
because the judgment is made in net/core: dev_validate_mtu

Signed-off-by: caihuoqing <caihuoqing@baidu.com>
---
 drivers/net/ethernet/huawei/hinic/hinic_dev.h  |  3 +++
 drivers/net/ethernet/huawei/hinic/hinic_main.c |  3 ++-
 drivers/net/ethernet/huawei/hinic/hinic_port.c | 17 +----------------
 3 files changed, 6 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_dev.h
index a4fbf44f944c..2bbc94c0a9c1 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_dev.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_dev.h
@@ -22,6 +22,9 @@
 
 #define LP_PKT_CNT		64
 
+#define HINIC_MAX_MTU_SIZE		9600
+#define HINIC_MIN_MTU_SIZE		256
+
 enum hinic_flags {
 	HINIC_LINK_UP = BIT(0),
 	HINIC_INTF_UP = BIT(1),
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_main.c b/drivers/net/ethernet/huawei/hinic/hinic_main.c
index c23ee2ddbce3..41e52f775aae 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_main.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c
@@ -1189,7 +1189,8 @@ static int nic_dev_init(struct pci_dev *pdev)
 	else
 		netdev->netdev_ops = &hinicvf_netdev_ops;
 
-	netdev->max_mtu = ETH_MAX_MTU;
+	netdev->max_mtu = HINIC_MAX_MTU_SIZE;
+	netdev->min_mtu = HINIC_MIN_MTU_SIZE;
 
 	nic_dev = netdev_priv(netdev);
 	nic_dev->netdev = netdev;
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_port.c b/drivers/net/ethernet/huawei/hinic/hinic_port.c
index 28ae6f1201a8..0a39c3dffa9a 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_port.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_port.c
@@ -17,9 +17,6 @@
 #include "hinic_port.h"
 #include "hinic_dev.h"
 
-#define HINIC_MIN_MTU_SIZE              256
-#define HINIC_MAX_JUMBO_FRAME_SIZE      15872
-
 enum mac_op {
 	MAC_DEL,
 	MAC_SET,
@@ -147,24 +144,12 @@ int hinic_port_get_mac(struct hinic_dev *nic_dev, u8 *addr)
  **/
 int hinic_port_set_mtu(struct hinic_dev *nic_dev, int new_mtu)
 {
-	struct net_device *netdev = nic_dev->netdev;
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_port_mtu_cmd port_mtu_cmd;
 	struct hinic_hwif *hwif = hwdev->hwif;
 	u16 out_size = sizeof(port_mtu_cmd);
 	struct pci_dev *pdev = hwif->pdev;
-	int err, max_frame;
-
-	if (new_mtu < HINIC_MIN_MTU_SIZE) {
-		netif_err(nic_dev, drv, netdev, "mtu < MIN MTU size");
-		return -EINVAL;
-	}
-
-	max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
-	if (max_frame > HINIC_MAX_JUMBO_FRAME_SIZE) {
-		netif_err(nic_dev, drv, netdev, "mtu > MAX MTU size");
-		return -EINVAL;
-	}
+	int err;
 
 	port_mtu_cmd.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
 	port_mtu_cmd.mtu = new_mtu;
-- 
2.25.1


             reply	other threads:[~2022-10-12  8:30 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-12  8:29 Cai Huoqing [this message]
2022-10-12  9:25 ` [PATCH] net: hinic: Update the range of MTU from 256 to 9600 shaozhengchao
2022-10-12 10:32   ` Cai Huoqing
2022-10-12 15:49 ` Jakub Kicinski
2022-10-13  6:14   ` Cai Huoqing

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221012082945.10353-1-cai.huoqing@linux.dev \
    --to=cai.huoqing@linux.dev \
    --cc=caihuoqing@baidu.com \
    --cc=christophe.jaillet@wanadoo.fr \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=gustavoars@kernel.org \
    --cc=kuba@kernel.org \
    --cc=leonro@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mqaio@linux.alibaba.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=shaozhengchao@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).