Re: [PATCH 1/3] iio: temperature: ltc2983: allocate iio channels once

[Jonathan Cameron <Jonathan.Cameron@huawei.com>]

On Fri, 14 Oct 2022 15:37:22 +0300
Cosmin Tanislav <demonsingur@gmail.com> wrote:

> From: Cosmin Tanislav <cosmin.tanislav@analog.com>
> 
> Currently, every time the device wakes up from sleep, the
> iio_chan array is reallocated, leaking the previous one
> until the device is removed (basically never).
> 
> Move the allocation to the probe function to avoid this.
> 
> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Hi Cosmin,

Please give a fixes tag for this one as we'll definitely want to
backport it.

Reply to this patch is fine as b4 will pick it up like any other tag.

> ---
>  drivers/iio/temperature/ltc2983.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
> index b652d2b39bcf..a60ccf183687 100644
> --- a/drivers/iio/temperature/ltc2983.c
> +++ b/drivers/iio/temperature/ltc2983.c
> @@ -1385,13 +1385,6 @@ static int ltc2983_setup(struct ltc2983_data *st, bool assign_iio)
>  		return ret;
>  	}
>  
> -	st->iio_chan = devm_kzalloc(&st->spi->dev,
> -				    st->iio_channels * sizeof(*st->iio_chan),
> -				    GFP_KERNEL);
> -
> -	if (!st->iio_chan)
> -		return -ENOMEM;
> -
>  	ret = regmap_update_bits(st->regmap, LTC2983_GLOBAL_CONFIG_REG,
>  				 LTC2983_NOTCH_FREQ_MASK,
>  				 LTC2983_NOTCH_FREQ(st->filter_notch_freq));
> @@ -1514,6 +1507,12 @@ static int ltc2983_probe(struct spi_device *spi)
>  		gpiod_set_value_cansleep(gpio, 0);
>  	}
>  
> +	st->iio_chan = devm_kzalloc(&spi->dev,
> +				    st->iio_channels * sizeof(*st->iio_chan),
> +				    GFP_KERNEL);
> +	if (!st->iio_chan)
> +		return -ENOMEM;
> +
>  	ret = ltc2983_setup(st, true);
>  	if (ret)
>  		return ret;