From: Horatiu Vultur <horatiu.vultur@microchip.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <UNGLinuxDriver@microchip.com>,
Horatiu Vultur <horatiu.vultur@microchip.com>
Subject: [PATCH net 2/3] net: lan966x: Adjust maximum frame size when vlan is enabled/disabled
Date: Sun, 23 Oct 2022 20:48:37 +0200 [thread overview]
Message-ID: <20221023184838.4128061-3-horatiu.vultur@microchip.com> (raw)
In-Reply-To: <20221023184838.4128061-1-horatiu.vultur@microchip.com>
When vlan filtering is enabled/disabled, it is required to adjust the
maximum received frame size that it can received. When vlan filtering is
enabled, it would all to receive extra 4 bytes, that are the vlan tag.
So the maximum frame size would be 1522 with a vlan tag. If vlan
filtering is disabled then the maximum frame size would be 1518
regardless if there is or not a vlan tag.
Fixes: 6d2c186afa5d ("net: lan966x: Add vlan support.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
.../net/ethernet/microchip/lan966x/lan966x_regs.h | 15 +++++++++++++++
.../net/ethernet/microchip/lan966x/lan966x_vlan.c | 6 ++++++
2 files changed, 21 insertions(+)
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_regs.h b/drivers/net/ethernet/microchip/lan966x/lan966x_regs.h
index 1d90b93dd417a..fb5087fef22e1 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_regs.h
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_regs.h
@@ -585,6 +585,21 @@ enum lan966x_target {
#define DEV_MAC_MAXLEN_CFG_MAX_LEN_GET(x)\
FIELD_GET(DEV_MAC_MAXLEN_CFG_MAX_LEN, x)
+/* DEV:MAC_CFG_STATUS:MAC_TAGS_CFG */
+#define DEV_MAC_TAGS_CFG(t) __REG(TARGET_DEV, t, 8, 28, 0, 1, 44, 12, 0, 1, 4)
+
+#define DEV_MAC_TAGS_CFG_VLAN_DBL_AWR_ENA BIT(1)
+#define DEV_MAC_TAGS_CFG_VLAN_DBL_AWR_ENA_SET(x)\
+ FIELD_PREP(DEV_MAC_TAGS_CFG_VLAN_DBL_AWR_ENA, x)
+#define DEV_MAC_TAGS_CFG_VLAN_DBL_AWR_ENA_GET(x)\
+ FIELD_GET(DEV_MAC_TAGS_CFG_VLAN_DBL_AWR_ENA, x)
+
+#define DEV_MAC_TAGS_CFG_VLAN_AWR_ENA BIT(0)
+#define DEV_MAC_TAGS_CFG_VLAN_AWR_ENA_SET(x)\
+ FIELD_PREP(DEV_MAC_TAGS_CFG_VLAN_AWR_ENA, x)
+#define DEV_MAC_TAGS_CFG_VLAN_AWR_ENA_GET(x)\
+ FIELD_GET(DEV_MAC_TAGS_CFG_VLAN_AWR_ENA, x)
+
/* DEV:MAC_CFG_STATUS:MAC_IFG_CFG */
#define DEV_MAC_IFG_CFG(t) __REG(TARGET_DEV, t, 8, 28, 0, 1, 44, 20, 0, 1, 4)
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_vlan.c b/drivers/net/ethernet/microchip/lan966x/lan966x_vlan.c
index 8d7260cd7da9c..3c44660128dae 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_vlan.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_vlan.c
@@ -169,6 +169,12 @@ void lan966x_vlan_port_apply(struct lan966x_port *port)
ANA_VLAN_CFG_VLAN_POP_CNT,
lan966x, ANA_VLAN_CFG(port->chip_port));
+ lan_rmw(DEV_MAC_TAGS_CFG_VLAN_AWR_ENA_SET(port->vlan_aware) |
+ DEV_MAC_TAGS_CFG_VLAN_DBL_AWR_ENA_SET(port->vlan_aware),
+ DEV_MAC_TAGS_CFG_VLAN_AWR_ENA |
+ DEV_MAC_TAGS_CFG_VLAN_DBL_AWR_ENA,
+ lan966x, DEV_MAC_TAGS_CFG(port->chip_port));
+
/* Drop frames with multicast source address */
val = ANA_DROP_CFG_DROP_MC_SMAC_ENA_SET(1);
if (port->vlan_aware && !pvid)
--
2.38.0
next prev parent reply other threads:[~2022-10-23 18:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-23 18:48 [PATCH net 0/3] net: lan966x: Fixes for when MTU is changed Horatiu Vultur
2022-10-23 18:48 ` [PATCH net 1/3] net: lan966x: Fix the MTU calculation Horatiu Vultur
2022-10-23 18:48 ` Horatiu Vultur [this message]
2022-10-23 18:48 ` [PATCH net 3/3] net: lan966x: Fix FDMA when MTU is changed Horatiu Vultur
2022-10-26 2:34 ` Jakub Kicinski
2022-10-26 18:35 ` Horatiu Vultur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221023184838.4128061-3-horatiu.vultur@microchip.com \
--to=horatiu.vultur@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).