From: Dmitry Safonov <dima@arista.com>
To: linux-kernel@vger.kernel.org, David Ahern <dsahern@kernel.org>,
Eric Dumazet <edumazet@google.com>
Cc: Dmitry Safonov <dima@arista.com>,
Andy Lutomirski <luto@amacapital.net>,
Ard Biesheuvel <ardb@kernel.org>,
Bob Gilligan <gilligan@arista.com>,
Dan Carpenter <dan.carpenter@oracle.com>,
"David S. Miller" <davem@davemloft.net>,
Dmitry Safonov <0x7f454c46@gmail.com>,
Eric Biggers <ebiggers@kernel.org>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Francesco Ruggeri <fruggeri@arista.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
Ivan Delalande <colona@arista.com>,
Jakub Kicinski <kuba@kernel.org>,
Leonard Crestez <cdleonard@gmail.com>,
Paolo Abeni <pabeni@redhat.com>,
Salam Noureddine <noureddine@arista.com>,
Shuah Khan <shuah@kernel.org>,
netdev@vger.kernel.org, linux-crypto@vger.kernel.org
Subject: [PATCH v3 31/36] selftests/tcp-ao: Add TCP-AO + TCP-MD5 + no sign listen socket tests
Date: Thu, 27 Oct 2022 21:43:42 +0100 [thread overview]
Message-ID: <20221027204347.529913-32-dima@arista.com> (raw)
In-Reply-To: <20221027204347.529913-1-dima@arista.com>
The test plan was (most of tests have all 3 client types):
1. TCP-AO listen (INADDR_ANY)
2. TCP-MD5 listen (INADDR_ANY)
3. non-signed listen (INADDR_ANY)
4. TCP-AO + TCP-MD5 listen (prefix)
5. TCP-AO subprefix add failure [checked in setsockopt-closed.c]
6. TCP-AO out of prefix connect [checked in connect-deny.c]
7. TCP-AO + TCP-MD5 on connect()
8. TCP-AO intersect with TCP-MD5 failure
9. Established TCP-AO: add TCP-MD5 key
10. Established TCP-MD5: add TCP-AO key
11. Established non-signed: add TCP-AO key
Output produced:
1..42
TAP version 13
ok 1 AO server (INADDR_ANY): AO client: connected
ok 2 AO server (INADDR_ANY): AO client: counter TCPAOGood increased 0 => 2
ok 3 AO server (INADDR_ANY): MD5 client
ok 4 AO server (INADDR_ANY): MD5 client: counter TCPMD5Unexpected increased 0 => 1
ok 5 AO server (INADDR_ANY): no sign client: counter TCPAORequired increased 0 => 1
ok 6 AO server (INADDR_ANY): unsigned client
ok 7 MD5 server (INADDR_ANY): AO client: counter TCPAOKeyNotFound increased 0 => 1
ok 8 MD5 server (INADDR_ANY): AO client
ok 9 MD5 server (INADDR_ANY): MD5 client: connected
ok 10 MD5 server (INADDR_ANY): no sign client: counter TCPMD5NotFound increased 0 => 1
ok 11 MD5 server (INADDR_ANY): no sign client
ok 12 no sign server: AO client
ok 13 no sign server: AO client: counter TCPAOKeyNotFound increased 1 => 2
ok 14 no sign server: MD5 client
ok 15 no sign server: MD5 client: counter TCPMD5Unexpected increased 1 => 2
ok 16 no sign server: no sign client: connected
ok 17 no sign server: no sign client: counter CurrEstab increased 0 => 1
ok 18 AO+MD5 server: AO client (matching): connected
ok 19 AO+MD5 server: AO client (matching): counter TCPAOGood increased 4 => 6
ok 20 AO+MD5 server: AO client (misconfig, matching MD5)
ok 21 AO+MD5 server: AO client (misconfig, matching MD5): counter TCPAOKeyNotFound increased 2 => 3
ok 22 AO+MD5 server: AO client (misconfig, non-matching): counter TCPAOKeyNotFound increased 3 => 4
ok 23 AO+MD5 server: AO client (misconfig, non-matching)
ok 24 AO+MD5 server: MD5 client (matching): connected
ok 25 AO+MD5 server: MD5 client (misconfig, matching AO)
ok 26 AO+MD5 server: MD5 client (misconfig, matching AO): counter TCPMD5Unexpected increased 2 => 3
ok 27 AO+MD5 server: MD5 client (misconfig, non-matching): counter TCPMD5Unexpected increased 3 => 4
ok 28 AO+MD5 server: MD5 client (misconfig, non-matching)
ok 29 AO+MD5 server: no sign client (unmatched): connected
ok 30 AO+MD5 server: no sign client (unmatched): counter CurrEstab increased 0 => 1
ok 31 AO+MD5 server: no sign client (misconfig, matching AO)
ok 32 AO+MD5 server: no sign client (misconfig, matching AO): counter TCPAORequired increased 1 => 2
ok 33 AO+MD5 server: no sign client (misconfig, matching MD5)
ok 34 AO+MD5 server: no sign client (misconfig, matching MD5): counter TCPMD5NotFound increased 1 => 2
ok 35 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: connect() was prevented
ok 36 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: connect() was prevented
ok 37 TCP-AO established: add TCP-MD5 key: postfailed as expected
ok 38 TCP-AO established: add TCP-MD5 key: counter TCPAOGood increased 7 => 9
ok 39 TCP-MD5 established: add TCP-AO key: postfailed as expected
ok 40 non-signed established: add TCP-AO key: postfailed as expected
ok 41 non-signed established: add TCP-AO key: counter CurrEstab increased 0 => 1
ok 42 TCP-AO key intersects with TCP-MD5 key: prefailed as expected
Signed-off-by: Dmitry Safonov <dima@arista.com>
---
tools/testing/selftests/net/tcp_ao/Makefile | 2 +-
.../selftests/net/tcp_ao/unsigned-md5.c | 524 ++++++++++++++++++
2 files changed, 525 insertions(+), 1 deletion(-)
create mode 100644 tools/testing/selftests/net/tcp_ao/unsigned-md5.c
diff --git a/tools/testing/selftests/net/tcp_ao/Makefile b/tools/testing/selftests/net/tcp_ao/Makefile
index a001dc2aed4e..da44966f3687 100644
--- a/tools/testing/selftests/net/tcp_ao/Makefile
+++ b/tools/testing/selftests/net/tcp_ao/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
TEST_BOTH_AF := connect icmps-discard icmps-accept connect-deny \
- setsockopt-closed
+ setsockopt-closed unsigned-md5
TEST_IPV4_PROGS := $(TEST_BOTH_AF:%=%_ipv4)
TEST_IPV6_PROGS := $(TEST_BOTH_AF:%=%_ipv6)
diff --git a/tools/testing/selftests/net/tcp_ao/unsigned-md5.c b/tools/testing/selftests/net/tcp_ao/unsigned-md5.c
new file mode 100644
index 000000000000..1fd24c010588
--- /dev/null
+++ b/tools/testing/selftests/net/tcp_ao/unsigned-md5.c
@@ -0,0 +1,524 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Dmitry Safonov <dima@arista.com> */
+#include <inttypes.h>
+#include "aolib.h"
+#include "../../../../include/linux/bits.h"
+
+typedef uint8_t fault_t;
+#define F_TIMEOUT 1
+#define F_KEYREJECT 2
+#define F_PREINSTALL 3
+#define F_POSTINSTALL 4
+
+#define fault(type) (inj == type)
+
+static const char *md5_password = "Some evil genius, enemy to mankind, must have been the first contriver.";
+static const char *ao_password = "In this hour, I do not believe that any darkness will endure.";
+
+static union tcp_addr client2;
+static union tcp_addr client3;
+
+static int test_set_md5(int sk, const union tcp_addr in_addr, uint8_t prefix)
+{
+ size_t pwd_len = strlen(md5_password);
+ struct tcp_md5sig md5sig = {};
+#ifdef IPV6_TEST
+ struct sockaddr_in6 addr = {
+ .sin6_family = AF_INET6,
+ .sin6_port = 0,
+ .sin6_addr = in_addr.a6,
+ };
+#else
+ struct sockaddr_in addr = {
+ .sin_family = AF_INET,
+ .sin_port = 0,
+ .sin_addr = in_addr.a4,
+ };
+#endif
+
+ if (prefix > DEFAULT_TEST_PREFIX)
+ prefix = DEFAULT_TEST_PREFIX;
+
+ md5sig.tcpm_keylen = pwd_len;
+ memcpy(md5sig.tcpm_key, md5_password, pwd_len);
+ md5sig.tcpm_flags = TCP_MD5SIG_FLAG_PREFIX;
+ md5sig.tcpm_prefixlen = prefix;
+ memcpy(&md5sig.tcpm_addr, &addr, sizeof(addr));
+
+ return setsockopt(sk, IPPROTO_TCP, TCP_MD5SIG_EXT,
+ &md5sig, sizeof(md5sig));
+}
+
+static bool tcp_md5_enabled = true;
+static void check_tcp_md5_support(void)
+{
+ int sk;
+ union tcp_addr addr_any = {};
+
+ sk = socket(test_family, SOCK_STREAM, IPPROTO_TCP);
+ if (sk < 0)
+ test_error("socket()");
+
+ if (test_set_md5(sk, addr_any, 0)) {
+ if (errno == ENOPROTOOPT)
+ tcp_md5_enabled = false;
+ else
+ test_error("setsockopt(TCP_MD5SIG_EXT)");
+ }
+ close(sk);
+}
+
+static void try_accept(const char *tst_name, unsigned int port,
+ union tcp_addr *md5_addr, uint8_t md5_prefix,
+ union tcp_addr *ao_addr, uint8_t ao_prefix,
+ uint8_t sndid, uint8_t rcvid, const char *cnt_name,
+ bool needs_md5, fault_t inj)
+{
+ uint64_t before_cnt, after_cnt;
+ int lsk, err, sk = 0;
+ time_t timeout;
+
+ if (needs_md5 && !tcp_md5_enabled) {
+ test_skip("%s: setsockopt(TCP_MD5SIG_EXT) is not supported", tst_name);
+ return;
+ }
+
+ lsk = test_listen_socket(this_ip_addr, port, 1);
+
+ if (md5_addr && test_set_md5(lsk, *md5_addr, md5_prefix))
+ test_error("setsockopt(TCP_MD5SIG_EXT)");
+
+ if (ao_addr && test_set_ao(lsk, ao_password, 0, *ao_addr,
+ ao_prefix, sndid, rcvid))
+ test_error("setsockopt(TCP_AO)");
+
+ if (cnt_name)
+ before_cnt = netstat_get_one(cnt_name, NULL);
+
+ synchronize_threads(); /* preparations done */
+
+ timeout = fault(F_TIMEOUT) ? TEST_RETRANSMIT_SEC : TEST_TIMEOUT_SEC;
+ err = test_wait_fd(lsk, timeout, 0);
+ if (err < 0)
+ test_error("test_wait_fd()");
+ else if (!err) {
+ if (!fault(F_TIMEOUT))
+ test_fail("timeouted for accept()");
+ } else {
+ if (fault(F_TIMEOUT))
+ test_fail("ready to accept");
+
+ sk = accept(lsk, NULL, NULL);
+ if (sk < 0) {
+ test_error("accept()");
+ } else {
+ if (fault(F_TIMEOUT))
+ test_fail("%s: accepted", tst_name);
+ }
+ }
+
+ close(lsk);
+
+ if (!cnt_name)
+ goto out;
+
+ after_cnt = netstat_get_one(cnt_name, NULL);
+
+ if (after_cnt <= before_cnt) {
+ test_fail("%s: %s counter did not increase: %zu <= %zu",
+ tst_name, cnt_name, after_cnt, before_cnt);
+ } else {
+ test_ok("%s: counter %s increased %zu => %zu",
+ tst_name, cnt_name, before_cnt, after_cnt);
+ }
+
+out:
+ synchronize_threads(); /* close() */
+ if (sk > 0)
+ close(sk);
+}
+
+static void server_add_routes(void)
+{
+ int family = TEST_FAMILY;
+
+ check_tcp_md5_support();
+ synchronize_threads(); /* client_add_ips() */
+
+ if (ip_route_add(veth_name, family, this_ip_addr, client2))
+ test_error("Failed to add route");
+ if (ip_route_add(veth_name, family, this_ip_addr, client3))
+ test_error("Failed to add route");
+}
+
+static void server_add_fail_tests(unsigned int *port)
+{
+ union tcp_addr addr_any = {};
+
+ try_accept("TCP-AO established: add TCP-MD5 key", (*port)++, NULL, 0,
+ &addr_any, 0, 100, 100, "TCPAOGood", true, 0);
+ try_accept("TCP-MD5 established: add TCP-AO key", (*port)++, &addr_any, 0,
+ NULL, 0, 0, 0, NULL, true, 0);
+ try_accept("non-signed established: add TCP-AO key", (*port)++, NULL, 0,
+ NULL, 0, 0, 0, "CurrEstab", false, 0);
+}
+
+static void *server_fn(void *arg)
+{
+ unsigned int port = test_server_port;
+ union tcp_addr addr_any = {};
+
+ server_add_routes();
+
+ try_accept("AO server (INADDR_ANY): AO client", port++, NULL, 0,
+ &addr_any, 0, 100, 100, "TCPAOGood", false, 0);
+ try_accept("AO server (INADDR_ANY): MD5 client", port++, NULL, 0,
+ &addr_any, 0, 100, 100, "TCPMD5Unexpected", true, F_TIMEOUT);
+ try_accept("AO server (INADDR_ANY): no sign client", port++, NULL, 0,
+ &addr_any, 0, 100, 100, "TCPAORequired", false, F_TIMEOUT);
+
+ try_accept("MD5 server (INADDR_ANY): AO client", port++, &addr_any, 0,
+ NULL, 0, 0, 0, "TCPAOKeyNotFound", true, F_TIMEOUT);
+ try_accept("MD5 server (INADDR_ANY): MD5 client", port++, &addr_any, 0,
+ NULL, 0, 0, 0, NULL, true, 0);
+ try_accept("MD5 server (INADDR_ANY): no sign client", port++, &addr_any, 0,
+ NULL, 0, 0, 0, "TCPMD5NotFound", true, F_TIMEOUT);
+
+ try_accept("no sign server: AO client", port++, NULL, 0,
+ NULL, 0, 0, 0, "TCPAOKeyNotFound", false, F_TIMEOUT);
+ try_accept("no sign server: MD5 client", port++, NULL, 0,
+ NULL, 0, 0, 0, "TCPMD5Unexpected", true, F_TIMEOUT);
+ try_accept("no sign server: no sign client", port++, NULL, 0,
+ NULL, 0, 0, 0, "CurrEstab", false, 0);
+
+ try_accept("AO+MD5 server: AO client (matching)", port++,
+ &this_ip_dest, TEST_PREFIX, &client2, TEST_PREFIX,
+ 100, 100, "TCPAOGood", true, 0);
+ try_accept("AO+MD5 server: AO client (misconfig, matching MD5)", port++,
+ &this_ip_dest, TEST_PREFIX, &client2, TEST_PREFIX,
+ 100, 100, "TCPAOKeyNotFound", true, F_TIMEOUT);
+ try_accept("AO+MD5 server: AO client (misconfig, non-matching)", port++,
+ &this_ip_dest, TEST_PREFIX, &client2, TEST_PREFIX,
+ 100, 100, "TCPAOKeyNotFound", true, F_TIMEOUT);
+ try_accept("AO+MD5 server: MD5 client (matching)", port++,
+ &this_ip_dest, TEST_PREFIX, &client2, TEST_PREFIX,
+ 100, 100, NULL, true, 0);
+ try_accept("AO+MD5 server: MD5 client (misconfig, matching AO)", port++,
+ &this_ip_dest, TEST_PREFIX, &client2, TEST_PREFIX,
+ 100, 100, "TCPMD5Unexpected", true, F_TIMEOUT);
+ try_accept("AO+MD5 server: MD5 client (misconfig, non-matching)", port++,
+ &this_ip_dest, TEST_PREFIX, &client2, TEST_PREFIX,
+ 100, 100, "TCPMD5Unexpected", true, F_TIMEOUT);
+ try_accept("AO+MD5 server: no sign client (unmatched)", port++,
+ &this_ip_dest, TEST_PREFIX, &client2, TEST_PREFIX,
+ 100, 100, "CurrEstab", true, 0);
+ try_accept("AO+MD5 server: no sign client (misconfig, matching AO)",
+ port++, &this_ip_dest, TEST_PREFIX, &client2, TEST_PREFIX,
+ 100, 100, "TCPAORequired", true, F_TIMEOUT);
+ try_accept("AO+MD5 server: no sign client (misconfig, matching MD5)",
+ port++, &this_ip_dest, TEST_PREFIX, &client2, TEST_PREFIX,
+ 100, 100, "TCPMD5NotFound", true, F_TIMEOUT);
+
+ try_accept("AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys",
+ port++, &this_ip_dest, TEST_PREFIX, &client2, TEST_PREFIX,
+ 100, 100, NULL, true, F_TIMEOUT);
+ try_accept("AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys",
+ port++, &this_ip_dest, TEST_PREFIX, &client2, TEST_PREFIX,
+ 100, 100, NULL, true, F_TIMEOUT);
+
+ server_add_fail_tests(&port);
+
+ /* client exits */
+ synchronize_threads();
+ return NULL;
+}
+
+static int client_bind(int sk, union tcp_addr bind_addr)
+{
+#ifdef IPV6_TEST
+ struct sockaddr_in6 addr = {
+ .sin6_family = AF_INET6,
+ .sin6_port = 0,
+ .sin6_addr = bind_addr.a6,
+ };
+#else
+ struct sockaddr_in addr = {
+ .sin_family = AF_INET,
+ .sin_port = 0,
+ .sin_addr = bind_addr.a4,
+ };
+#endif
+ return bind(sk, &addr, sizeof(addr));
+}
+
+static void try_connect(const char *tst_name, unsigned int port,
+ union tcp_addr *md5_addr, uint8_t md5_prefix,
+ union tcp_addr *ao_addr, uint8_t ao_prefix,
+ uint8_t sndid, uint8_t rcvid, fault_t inj,
+ bool needs_md5, union tcp_addr *bind_addr)
+{
+ time_t timeout;
+ int sk, ret;
+
+ if (needs_md5 && !tcp_md5_enabled) {
+ test_skip("%s: setsockopt(TCP_MD5SIG_EXT) is not supported", tst_name);
+ return;
+ }
+
+ sk = socket(test_family, SOCK_STREAM, IPPROTO_TCP);
+ if (sk < 0)
+ test_error("socket()");
+
+ if (bind_addr && client_bind(sk, *bind_addr))
+ test_error("bind()");
+
+ if (md5_addr && test_set_md5(sk, *md5_addr, md5_prefix))
+ test_error("setsockopt(TCP_MD5SIG_EXT)");
+
+ if (ao_addr && test_set_ao(sk, ao_password, 0, *ao_addr,
+ ao_prefix, sndid, rcvid))
+ test_error("setsockopt(TCP_AO)");
+
+ synchronize_threads(); /* preparations done */
+
+ timeout = fault(F_TIMEOUT) ? TEST_RETRANSMIT_SEC : TEST_TIMEOUT_SEC;
+ ret = _test_connect_socket(sk, this_ip_dest, port, timeout);
+
+ if (ret < 0) {
+ if (fault(F_KEYREJECT) && ret == -EKEYREJECTED) {
+ test_ok("%s: connect() was prevented", tst_name);
+ goto out;
+ } else if (ret == -ECONNREFUSED &&
+ (fault(F_TIMEOUT) || fault(F_KEYREJECT))) {
+ test_ok("%s: refused to connect", tst_name);
+ goto out;
+ } else {
+ test_error("%s: connect() returned %d", tst_name, ret);
+ }
+ }
+
+ if (ret == 0) {
+ if (fault(F_TIMEOUT))
+ test_ok("%s", tst_name);
+ else
+ test_fail("%s: failed to connect()", tst_name);
+ } else {
+ if (fault(F_TIMEOUT) || fault(F_KEYREJECT))
+ test_fail("%s: connected", tst_name);
+ else
+ test_ok("%s: connected", tst_name);
+ }
+
+out:
+ synchronize_threads(); /* close() */
+ /* _test_connect_socket() cleans up on failure */
+ if (ret > 0)
+ close(sk);
+}
+
+#define PREINSTALL_MD5 BIT(1)
+#define POSTINSTALL_MD5 BIT(2)
+#define PREINSTALL_AO BIT(3)
+#define POSTINSTALL_AO BIT(4)
+
+static void try_to_add(const char *tst_name, unsigned int port,
+ unsigned int strategy,
+ union tcp_addr md5_addr, uint8_t md5_prefix,
+ union tcp_addr ao_addr, uint8_t ao_prefix,
+ uint8_t sndid, uint8_t rcvid,
+ bool needs_md5, fault_t inj)
+{
+ time_t timeout;
+ int sk, ret;
+
+ if (needs_md5 && !tcp_md5_enabled) {
+ test_skip("%s: setsockopt(TCP_MD5SIG_EXT) is not supported", tst_name);
+ return;
+ }
+
+ sk = socket(test_family, SOCK_STREAM, IPPROTO_TCP);
+ if (sk < 0)
+ test_error("socket()");
+
+ if (client_bind(sk, this_ip_addr))
+ test_error("bind()");
+
+ if (strategy & PREINSTALL_MD5) {
+ if (test_set_md5(sk, md5_addr, md5_prefix))
+ test_error("setsockopt(TCP_MD5SIG_EXT)");
+ }
+
+ if (strategy & PREINSTALL_AO) {
+ if (test_set_ao(sk, ao_password, 0, ao_addr,
+ ao_prefix, sndid, rcvid)) {
+ if (fault(F_PREINSTALL)) {
+ test_ok("%s: prefailed as expected", tst_name);
+ goto out_no_sync;
+ } else {
+ test_error("setsockopt(TCP_AO)");
+ }
+ } else if (fault(F_PREINSTALL)) {
+ test_fail("%s: setsockopt()s were expected to fail", tst_name);
+ goto out_no_sync;
+ }
+ }
+
+ synchronize_threads(); /* preparations done */
+
+ timeout = fault(F_TIMEOUT) ? TEST_RETRANSMIT_SEC : TEST_TIMEOUT_SEC;
+ ret = _test_connect_socket(sk, this_ip_dest, port, timeout);
+
+ if (ret <= 0) {
+ test_error("%s: connect() returned %d", tst_name, ret);
+ goto out;
+ }
+
+ if (strategy & POSTINSTALL_MD5) {
+ if (test_set_md5(sk, md5_addr, md5_prefix)) {
+ if (fault(F_POSTINSTALL)) {
+ test_ok("%s: postfailed as expected", tst_name);
+ goto out;
+ } else {
+ test_error("setsockopt(TCP_MD5SIG_EXT)");
+ }
+ } else if (fault(F_POSTINSTALL)) {
+ test_fail("%s: post setsockopt() was expected to fail", tst_name);
+ goto out;
+ }
+ }
+
+ if (strategy & POSTINSTALL_AO) {
+ if (test_set_ao(sk, ao_password, 0, ao_addr,
+ ao_prefix, sndid, rcvid)) {
+ if (fault(F_POSTINSTALL)) {
+ test_ok("%s: postfailed as expected", tst_name);
+ goto out;
+ } else {
+ test_error("setsockopt(TCP_AO)");
+ }
+ } else if (fault(F_POSTINSTALL)) {
+ test_fail("%s: post setsockopt() was expected to fail", tst_name);
+ goto out;
+ }
+ }
+
+out:
+ synchronize_threads(); /* close() */
+out_no_sync:
+ /* _test_connect_socket() cleans up on failure */
+ if (ret > 0)
+ close(sk);
+}
+
+static void client_add_ip(union tcp_addr *client, const char *ip)
+{
+ int family = TEST_FAMILY;
+
+ if (inet_pton(family, ip, client) != 1)
+ test_error("Can't convert ip address %s", ip);
+
+ if (ip_addr_add(veth_name, family, *client, TEST_PREFIX))
+ test_error("Failed to add ip address");
+ if (ip_route_add(veth_name, family, *client, this_ip_dest))
+ test_error("Failed to add route");
+}
+
+static void client_add_ips(void)
+{
+ client_add_ip(&client2, __TEST_CLIENT_IP(2));
+ client_add_ip(&client3, __TEST_CLIENT_IP(3));
+ synchronize_threads(); /* server_add_routes() */
+}
+
+static void client_add_fail_tests(unsigned int *port)
+{
+ try_to_add("TCP-AO established: add TCP-MD5 key",
+ (*port)++, POSTINSTALL_MD5 | PREINSTALL_AO,
+ this_ip_dest, TEST_PREFIX, this_ip_dest, TEST_PREFIX,
+ 100, 100, true, F_POSTINSTALL);
+ try_to_add("TCP-MD5 established: add TCP-AO key",
+ (*port)++, PREINSTALL_MD5 | POSTINSTALL_AO,
+ this_ip_dest, TEST_PREFIX, this_ip_dest, TEST_PREFIX,
+ 100, 100, true, F_POSTINSTALL);
+ try_to_add("non-signed established: add TCP-AO key",
+ (*port)++, POSTINSTALL_AO,
+ this_ip_dest, TEST_PREFIX, this_ip_dest, TEST_PREFIX,
+ 100, 100, false, F_POSTINSTALL);
+
+ try_to_add("TCP-AO key intersects with TCP-MD5 key",
+ (*port), PREINSTALL_MD5 | PREINSTALL_AO,
+ this_ip_addr, TEST_PREFIX, this_ip_addr, TEST_PREFIX,
+ 100, 100, true, F_PREINSTALL);
+}
+
+static void *client_fn(void *arg)
+{
+ unsigned int port = test_server_port;
+ union tcp_addr addr_any = {};
+
+ client_add_ips();
+
+ try_connect("AO server (INADDR_ANY): AO client", port++, NULL, 0,
+ &addr_any, 0, 100, 100, 0, false, &this_ip_addr);
+ try_connect("AO server (INADDR_ANY): MD5 client", port++, &addr_any, 0,
+ NULL, 0, 100, 100, F_TIMEOUT, true, &this_ip_addr);
+ try_connect("AO server (INADDR_ANY): unsigned client", port++, NULL, 0,
+ NULL, 0, 100, 100, F_TIMEOUT, false, &this_ip_addr);
+
+ try_connect("MD5 server (INADDR_ANY): AO client", port++, NULL, 0,
+ &addr_any, 0, 100, 100, F_TIMEOUT, true, &this_ip_addr);
+ try_connect("MD5 server (INADDR_ANY): MD5 client", port++, &addr_any, 0,
+ NULL, 0, 100, 100, 0, true, &this_ip_addr);
+ try_connect("MD5 server (INADDR_ANY): no sign client", port++, NULL, 0,
+ NULL, 0, 100, 100, F_TIMEOUT, true, &this_ip_addr);
+
+ try_connect("no sign server: AO client", port++, NULL, 0,
+ &addr_any, 0, 100, 100, F_TIMEOUT, false, &this_ip_addr);
+ try_connect("no sign server: MD5 client", port++, &addr_any, 0,
+ NULL, 0, 100, 100, F_TIMEOUT, true, &this_ip_addr);
+ try_connect("no sign server: no sign client", port++, NULL, 0,
+ NULL, 0, 100, 100, 0, false, &this_ip_addr);
+
+ try_connect("AO+MD5 server: AO client (matching)", port++, NULL, 0,
+ &addr_any, 0, 100, 100, 0, true, &client2);
+ try_connect("AO+MD5 server: AO client (misconfig, matching MD5)",
+ port++, NULL, 0, &addr_any, 0, 100, 100,
+ F_TIMEOUT, true, &this_ip_addr);
+ try_connect("AO+MD5 server: AO client (misconfig, non-matching)",
+ port++, NULL, 0, &addr_any, 0, 100, 100,
+ F_TIMEOUT, true, &client3);
+ try_connect("AO+MD5 server: MD5 client (matching)", port++, &addr_any, 0,
+ NULL, 0, 100, 100, 0, true, &this_ip_addr);
+ try_connect("AO+MD5 server: MD5 client (misconfig, matching AO)",
+ port++, &addr_any, 0, NULL, 0, 100, 100, F_TIMEOUT,
+ true, &client2);
+ try_connect("AO+MD5 server: MD5 client (misconfig, non-matching)",
+ port++, &addr_any, 0, NULL, 0, 100, 100, F_TIMEOUT,
+ true, &client3);
+ try_connect("AO+MD5 server: no sign client (unmatched)",
+ port++, NULL, 0, NULL, 0, 100, 100, 0, true, &client3);
+ try_connect("AO+MD5 server: no sign client (misconfig, matching AO)",
+ port++, NULL, 0, NULL, 0, 100, 100, F_TIMEOUT,
+ true, &client2);
+ try_connect("AO+MD5 server: no sign client (misconfig, matching MD5)",
+ port++, NULL, 0, NULL, 0, 100, 100, F_TIMEOUT,
+ true, &this_ip_addr);
+
+ try_connect("AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys",
+ port++, &this_ip_addr, TEST_PREFIX,
+ &client2, TEST_PREFIX, 100, 100, F_KEYREJECT,
+ true, &this_ip_addr);
+ try_connect("AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys",
+ port++, &this_ip_addr, TEST_PREFIX,
+ &client2, TEST_PREFIX, 100, 100, F_KEYREJECT, true, &client2);
+
+ client_add_fail_tests(&port);
+
+ return NULL;
+}
+
+int main(int argc, char *argv[])
+{
+ test_init(42, server_fn, client_fn);
+ return 0;
+}
--
2.38.1
next prev parent reply other threads:[~2022-10-27 20:52 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-27 20:43 [PATCH v3 00/36] net/tcp: Add TCP-AO support Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 01/36] crypto: Introduce crypto_pool Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 02/36] crypto_pool: Add crypto_pool_reserve_scratch() Dmitry Safonov
2022-10-28 7:06 ` kernel test robot
2022-10-27 20:43 ` [PATCH v3 03/36] net/tcp: Separate tcp_md5sig_info allocation into tcp_md5sig_info_add() Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 04/36] net/tcp: Disable TCP-MD5 static key on tcp_md5sig_info destruction Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 05/36] net/tcp: Use crypto_pool for TCP-MD5 Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 06/36] net/ipv6: sr: Switch to using crypto_pool Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 07/36] tcp: Add TCP-AO config and structures Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 08/36] net/tcp: Introduce TCP_AO setsockopt()s Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 09/36] net/tcp: Prevent TCP-MD5 with TCP-AO being set Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 10/36] net/tcp: Calculate TCP-AO traffic keys Dmitry Safonov
2022-10-28 8:07 ` kernel test robot
2022-10-27 20:43 ` [PATCH v3 11/36] net/tcp: Add TCP-AO sign to outgoing packets Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 12/36] net/tcp: Add tcp_parse_auth_options() Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 13/36] net/tcp: Add AO sign to RST packets Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 14/36] net/tcp: Add TCP-AO sign to twsk Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 15/36] net/tcp: Wire TCP-AO to request sockets Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 16/36] net/tcp: Sign SYN-ACK segments with TCP-AO Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 17/36] net/tcp: Verify inbound TCP-AO signed segments Dmitry Safonov
2022-10-28 5:15 ` kernel test robot
2022-10-27 20:43 ` [PATCH v3 18/36] net/tcp: Add TCP-AO segments counters Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 19/36] net/tcp: Add TCP-AO SNE support Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 20/36] net/tcp: Add tcp_hash_fail() ratelimited logs Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 21/36] net/tcp: Ignore specific ICMPs for TCP-AO connections Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 22/36] net/tcp: Add option for TCP-AO to (not) hash header Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 23/36] net/tcp: Add getsockopt(TCP_AO_GET) Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 24/36] net/tcp: Allow asynchronous delete for TCP-AO keys (MKTs) Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 25/36] net/tcp-ao: Add static_key for TCP-AO Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 26/36] selftests/net: Add TCP-AO library Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 27/36] selftests/net: Verify that TCP-AO complies with ignoring ICMPs Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 28/36] selftest/net: Add TCP-AO ICMPs accept test Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 29/36] selftest/tcp-ao: Add a test for MKT matching Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 30/36] selftest/tcp-ao: Add test for TCP-AO add setsockopt() command Dmitry Safonov
2022-10-27 20:43 ` Dmitry Safonov [this message]
2022-10-27 20:43 ` [PATCH v3 32/36] selftests/aolib: Add test/benchmark for removing MKTs Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 33/36] selftests/nettest: Remove client_pw Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 34/36] selftest/nettest: Rename md5_prefix* => auth_prefix* Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 35/36] selftests/nettest: Add TCP-AO support Dmitry Safonov
2022-10-27 20:43 ` [PATCH v3 36/36] selftests/fcnal-test.sh: Add TCP-AO tests Dmitry Safonov
2022-11-01 2:22 ` [PATCH v3 00/36] net/tcp: Add TCP-AO support David Ahern
2022-11-01 17:35 ` Dmitry Safonov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221027204347.529913-32-dima@arista.com \
--to=dima@arista.com \
--cc=0x7f454c46@gmail.com \
--cc=ardb@kernel.org \
--cc=cdleonard@gmail.com \
--cc=colona@arista.com \
--cc=dan.carpenter@oracle.com \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=ebiederm@xmission.com \
--cc=ebiggers@kernel.org \
--cc=edumazet@google.com \
--cc=fruggeri@arista.com \
--cc=gilligan@arista.com \
--cc=herbert@gondor.apana.org.au \
--cc=kuba@kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=netdev@vger.kernel.org \
--cc=noureddine@arista.com \
--cc=pabeni@redhat.com \
--cc=shuah@kernel.org \
--cc=yoshfuji@linux-ipv6.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).