From: Marijn Suijten <marijn.suijten@somainline.org>
To: Kalyan Thota <quic_kalyant@quicinc.com>
Cc: dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, robdclark@gmail.com,
dianders@chromium.org, swboyd@chromium.org,
quic_vpolimer@quicinc.com, dmitry.baryshkov@linaro.org,
quic_abhinavk@quicinc.com
Subject: Re: [v6] drm/msm/disp/dpu1: add support for dspp sub block flush in sc7280
Date: Fri, 28 Oct 2022 17:25:19 +0200 [thread overview]
Message-ID: <20221028152519.szxtc635pcaectxp@SoMainline.org> (raw)
In-Reply-To: <1664680506-8336-1-git-send-email-quic_kalyant@quicinc.com>
On 2022-10-01 20:15:06, Kalyan Thota wrote:
> Flush mechanism for DSPP blocks has changed in sc7280 family, it
> allows individual sub blocks to be flushed in coordination with
> master flush control.
>
> Representation: master_flush && (PCC_flush | IGC_flush .. etc )
>
> This change adds necessary support for the above design.
>
> Changes in v1:
> - Few nits (Doug, Dmitry)
> - Restrict sub-block flush programming to dpu_hw_ctl file (Dmitry)
>
> Changes in v2:
> - Move the address offset to flush macro (Dmitry)
> - Seperate ops for the sub block flush (Dmitry)
>
> Changes in v3:
> - Reuse the DPU_DSPP_xx enum instead of a new one (Dmitry)
>
> Changes in v4:
> - Use shorter version for unsigned int (Stephen)
>
> Changes in v5:
> - Spurious patch please ignore.
>
> Changes in v6:
> - Add SOB tag (Doug, Dmitry)
>
> Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 2 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +++-
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 +++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 35 ++++++++++++++++++++++++--
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 10 ++++++--
> 5 files changed, 50 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index 601d687..4170fbe 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -766,7 +766,7 @@ static void _dpu_crtc_setup_cp_blocks(struct drm_crtc *crtc)
>
> /* stage config flush mask */
> ctl->ops.update_pending_flush_dspp(ctl,
> - mixer[i].hw_dspp->idx);
> + mixer[i].hw_dspp->idx, DPU_DSPP_PCC);
> }
> }
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 27f029f..0eecb2f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -65,7 +65,10 @@
> (PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2))
>
> #define CTL_SC7280_MASK \
> - (BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG))
> + (BIT(DPU_CTL_ACTIVE_CFG) | \
> + BIT(DPU_CTL_FETCH_ACTIVE) | \
> + BIT(DPU_CTL_VM_CFG) | \
> + BIT(DPU_CTL_DSPP_SUB_BLOCK_FLUSH))
>
> #define MERGE_3D_SM8150_MASK (0)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 38aa38a..8148e91 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -161,10 +161,12 @@ enum {
> * DSPP sub-blocks
> * @DPU_DSPP_PCC Panel color correction block
> * @DPU_DSPP_GC Gamma correction block
> + * @DPU_DSPP_IGC Inverse Gamma correction block
Lowercase G? Otherwise capitalize Correction as well to match the IGC
abbrev., and do the same for the other abbreviations above.
> */
> enum {
> DPU_DSPP_PCC = 0x1,
> DPU_DSPP_GC,
> + DPU_DSPP_IGC,
> DPU_DSPP_MAX
> };
>
> @@ -191,6 +193,7 @@ enum {
> * @DPU_CTL_SPLIT_DISPLAY: CTL supports video mode split display
> * @DPU_CTL_FETCH_ACTIVE: Active CTL for fetch HW (SSPPs)
> * @DPU_CTL_VM_CFG: CTL config to support multiple VMs
> + * @DPU_CTL_DSPP_BLOCK_FLUSH: CTL config to support dspp sub-block flush
> * @DPU_CTL_MAX
> */
> enum {
> @@ -198,6 +201,7 @@ enum {
> DPU_CTL_ACTIVE_CFG,
> DPU_CTL_FETCH_ACTIVE,
> DPU_CTL_VM_CFG,
> + DPU_CTL_DSPP_SUB_BLOCK_FLUSH,
> DPU_CTL_MAX
> };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index a35ecb6..f26f484 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -33,6 +33,7 @@
> #define CTL_INTF_FLUSH 0x110
> #define CTL_INTF_MASTER 0x134
> #define CTL_FETCH_PIPE_ACTIVE 0x0FC
> +#define CTL_DSPP_n_FLUSH(n) ((0x13C) + ((n - 1) * 4))
Use spaces for indentation just like the other defines. Replace 1 with
DSPP_0.
>
> #define CTL_MIXER_BORDER_OUT BIT(24)
> #define CTL_FLUSH_MASK_CTL BIT(17)
> @@ -287,8 +288,9 @@ static void dpu_hw_ctl_update_pending_flush_merge_3d_v1(struct dpu_hw_ctl *ctx,
> }
>
> static void dpu_hw_ctl_update_pending_flush_dspp(struct dpu_hw_ctl *ctx,
> - enum dpu_dspp dspp)
> + enum dpu_dspp dspp, u32 dspp_sub_blk)
> {
> +
> switch (dspp) {
> case DSPP_0:
> ctx->pending_flush_mask |= BIT(13);
> @@ -307,6 +309,31 @@ static void dpu_hw_ctl_update_pending_flush_dspp(struct dpu_hw_ctl *ctx,
> }
> }
>
> +static void dpu_hw_ctl_update_pending_flush_dspp_subblocks(
> + struct dpu_hw_ctl *ctx, enum dpu_dspp dspp, u32 dspp_sub_blk)
> +{
> + u32 flushbits = 0, active;
> +
> + switch (dspp_sub_blk) {
> + case DPU_DSPP_IGC:
> + flushbits = BIT(2);
> + break;
> + case DPU_DSPP_PCC:
> + flushbits = BIT(4);
> + break;
> + case DPU_DSPP_GC:
> + flushbits = BIT(5);
> + break;
> + default:
> + return;
> + }
> +
> + active = DPU_REG_READ(&ctx->hw, CTL_DSPP_n_FLUSH(dspp));
> + DPU_REG_WRITE(&ctx->hw, CTL_DSPP_n_FLUSH(dspp), active | flushbits);
> +
> + ctx->pending_flush_mask |= BIT(29);
> +}
> +
> static u32 dpu_hw_ctl_poll_reset_status(struct dpu_hw_ctl *ctx, u32 timeout_us)
> {
> struct dpu_hw_blk_reg_map *c = &ctx->hw;
> @@ -675,7 +702,11 @@ static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops,
> ops->setup_blendstage = dpu_hw_ctl_setup_blendstage;
> ops->update_pending_flush_sspp = dpu_hw_ctl_update_pending_flush_sspp;
> ops->update_pending_flush_mixer = dpu_hw_ctl_update_pending_flush_mixer;
> - ops->update_pending_flush_dspp = dpu_hw_ctl_update_pending_flush_dspp;
> + if (cap & BIT(DPU_CTL_DSPP_SUB_BLOCK_FLUSH))
> + ops->update_pending_flush_dspp = dpu_hw_ctl_update_pending_flush_dspp_subblocks;
> + else
> + ops->update_pending_flush_dspp = dpu_hw_ctl_update_pending_flush_dspp;
> +
> if (cap & BIT(DPU_CTL_FETCH_ACTIVE))
> ops->set_active_pipes = dpu_hw_ctl_set_fetch_pipe_active;
> };
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index 96c012e..1743572 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -149,12 +149,18 @@ struct dpu_hw_ctl_ops {
>
> /**
> * OR in the given flushbits to the cached pending_flush_mask
> - * No effect on hardware
> + *
> + * If the hardware supports dspp sub block flush, then sub-block
sub[ -]block written with a space _and_ with a hyphen, what is it?
> + * flushes are written to the hardware and main dspp flush will
> + * be cached in the pending_flush_mask.
> + *
> * @ctx : ctl path ctx pointer
> * @blk : DSPP block index
> + * @dspp_sub_blk : DSPP sub-block index
> */
> void (*update_pending_flush_dspp)(struct dpu_hw_ctl *ctx,
> - enum dpu_dspp blk);
> + enum dpu_dspp blk, u32 dspp_sub_blk);
Double space?
- Marijn
> +
> /**
> * Write the value of the pending_flush_mask to hardware
> * @ctx : ctl path ctx pointer
> --
> 2.7.4
>
prev parent reply other threads:[~2022-10-28 15:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-02 3:15 [v6] drm/msm/disp/dpu1: add support for dspp sub block flush in sc7280 Kalyan Thota
2022-10-04 14:33 ` Dmitry Baryshkov
2022-10-07 14:34 ` Kalyan Thota
2022-10-28 12:25 ` Dmitry Baryshkov
2022-10-28 15:25 ` Marijn Suijten [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221028152519.szxtc635pcaectxp@SoMainline.org \
--to=marijn.suijten@somainline.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_kalyant@quicinc.com \
--cc=quic_vpolimer@quicinc.com \
--cc=robdclark@gmail.com \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).