From: Bryan Brattlof <bb@ti.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Amit Kucheria <amitk@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>
Cc: Keerthy <j-keerthy@ti.com>, Linux PM <linux-pm@vger.kernel.org>,
Device Trees <devicetree@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
LKML ARM <linux-arm-kernel@lists.infradead.org>,
Bryan Brattlof <bb@ti.com>
Subject: [PATCH v3 09/11] arm64: dts: ti: k3-j721e-mcu-wakeup: add VTM node
Date: Mon, 31 Oct 2022 18:27:00 -0500 [thread overview]
Message-ID: <20221031232702.10339-10-bb@ti.com> (raw)
In-Reply-To: <20221031232702.10339-1-bb@ti.com>
The j721e supports a single Voltage and Thermal Management (VTM) module
located in the wakeup domain with five associated temperature monitors
located in various hot spots on the die.
Signed-off-by: Bryan Brattlof <bb@ti.com>
---
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 9 +++
arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi | 75 +++++++++++++++++++
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 3 +
3 files changed, 87 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index df08724bbf1c5..9a09f66c51c01 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -418,4 +418,13 @@ mcu_mcan1: can@40568000 {
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
};
+
+ vtm0: temperature-sensor@42040000 {
+ compatible = "ti,j721e-vtm";
+ reg = <0x00 0x42040000 0x00 0x350>,
+ <0x00 0x42050000 0x00 0x350>,
+ <0x00 0x43000300 0x00 0x10>;
+ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+ #thermal-sensor-cells = <1>;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
new file mode 100644
index 0000000000000..79641927a9092
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+ wkup_thermal: wkup-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 0>;
+
+ trips {
+ wkup_crit: wkup-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ mpu_thermal: mpu-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 1>;
+
+ trips {
+ mpu_crit: mpu-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ c7x_thermal: c7x-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 2>;
+
+ trips {
+ c7x_crit: c7x-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 3>;
+
+ trips {
+ gpu_crit: gpu-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ r5f_thermal: r5f-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 4>;
+
+ trips {
+ r5f_crit: r5f-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index 0e23886c9fd1d..cfab10e2455c4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -181,6 +181,9 @@ cbass_mcu_wakeup: bus@28380000 {
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
};
};
+
+ #include "k3-j721e-thermal.dtsi"
+
};
/* Now include the peripherals for each bus segments */
--
2.38.1
next prev parent reply other threads:[~2022-10-31 23:28 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-31 23:26 [PATCH v3 00/11] enable VTM node for all TI's K3 SoCs Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 01/11] thermal: k3_j72xx_bandgap: simplify k3_thermal_get_temp() function Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 02/11] thermal: k3_j72xx_bandgap: use bool for i2128 erratum flag Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 03/11] thermal: k3_j72xx_bandgap: remove fuse_base from structure Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 04/11] thermal: k3_j72xx_bandgap: map fuse_base only for erratum workaround Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 05/11] dt-bindings: thermal: k3-j72xx: elaborate on binding description Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 06/11] dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 07/11] arm64: dts: ti: k3-am64-main: add VTM node Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 08/11] arm64: dts: ti: k3-am62-wakeup: " Bryan Brattlof
2022-10-31 23:27 ` Bryan Brattlof [this message]
2022-10-31 23:27 ` [PATCH v3 10/11] arm64: dts: ti: k3-j721s2-mcu-wakeup: " Bryan Brattlof
2022-10-31 23:27 ` [PATCH v3 11/11] arm64: dts: ti: k3-j7200-mcu-wakeup: " Bryan Brattlof
2022-12-06 17:02 ` [PATCH v3 00/11] enable VTM node for all TI's K3 SoCs Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221031232702.10339-10-bb@ti.com \
--to=bb@ti.com \
--cc=amitk@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nm@ti.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).