From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>
Cc: Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Michael Kelley <mikelley@microsoft.com>,
Siddharth Chandrasekaran <sidcha@amazon.de>,
Yuan Yao <yuan.yao@linux.intel.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v13 21/48] KVM: x86: Introduce .hv_inject_synthetic_vmexit_post_tlb_flush() nested hook
Date: Tue, 1 Nov 2022 15:53:59 +0100 [thread overview]
Message-ID: <20221101145426.251680-22-vkuznets@redhat.com> (raw)
In-Reply-To: <20221101145426.251680-1-vkuznets@redhat.com>
Hyper-V supports injecting synthetic L2->L1 exit after performing
L2 TLB flush operation but the procedure is vendor specific. Introduce
.hv_inject_synthetic_vmexit_post_tlb_flush nested hook for it.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/Makefile | 3 ++-
arch/x86/kvm/svm/hyperv.c | 11 +++++++++++
arch/x86/kvm/svm/hyperv.h | 2 ++
arch/x86/kvm/svm/nested.c | 1 +
arch/x86/kvm/vmx/hyperv.c | 4 ++++
arch/x86/kvm/vmx/hyperv.h | 1 +
arch/x86/kvm/vmx/nested.c | 1 +
8 files changed, 23 insertions(+), 1 deletion(-)
create mode 100644 arch/x86/kvm/svm/hyperv.c
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index ede163b6f955..cccaf423f4d9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1695,6 +1695,7 @@ struct kvm_x86_nested_ops {
int (*enable_evmcs)(struct kvm_vcpu *vcpu,
uint16_t *vmcs_version);
uint16_t (*get_evmcs_version)(struct kvm_vcpu *vcpu);
+ void (*hv_inject_synthetic_vmexit_post_tlb_flush)(struct kvm_vcpu *vcpu);
};
struct kvm_x86_init_ops {
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 4412f0b8244c..7ac6ea23122f 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -25,7 +25,8 @@ kvm-intel-y += vmx/vmx.o vmx/vmenter.o vmx/pmu_intel.o vmx/vmcs12.o \
vmx/hyperv.o vmx/nested.o vmx/posted_intr.o
kvm-intel-$(CONFIG_X86_SGX_KVM) += vmx/sgx.o
-kvm-amd-y += svm/svm.o svm/vmenter.o svm/pmu.o svm/nested.o svm/avic.o svm/sev.o
+kvm-amd-y += svm/svm.o svm/vmenter.o svm/pmu.o svm/nested.o svm/avic.o \
+ svm/sev.o svm/hyperv.o
ifdef CONFIG_HYPERV
kvm-amd-y += svm/svm_onhyperv.o
diff --git a/arch/x86/kvm/svm/hyperv.c b/arch/x86/kvm/svm/hyperv.c
new file mode 100644
index 000000000000..911f51021af1
--- /dev/null
+++ b/arch/x86/kvm/svm/hyperv.c
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD SVM specific code for Hyper-V on KVM.
+ *
+ * Copyright 2022 Red Hat, Inc. and/or its affiliates.
+ */
+#include "hyperv.h"
+
+void svm_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu)
+{
+}
diff --git a/arch/x86/kvm/svm/hyperv.h b/arch/x86/kvm/svm/hyperv.h
index e97d80974e72..7564bdf652e4 100644
--- a/arch/x86/kvm/svm/hyperv.h
+++ b/arch/x86/kvm/svm/hyperv.h
@@ -25,4 +25,6 @@ static inline void nested_svm_hv_update_vm_vp_ids(struct kvm_vcpu *vcpu)
hv_vcpu->nested.vp_id = hve->hv_vp_id;
}
+void svm_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu);
+
#endif /* __ARCH_X86_KVM_SVM_HYPERV_H__ */
diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index 45bab740f3f0..05889d5a8629 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -1721,4 +1721,5 @@ struct kvm_x86_nested_ops svm_nested_ops = {
.get_nested_state_pages = svm_get_nested_state_pages,
.get_state = svm_get_nested_state,
.set_state = svm_set_nested_state,
+ .hv_inject_synthetic_vmexit_post_tlb_flush = svm_hv_inject_synthetic_vmexit_post_tlb_flush,
};
diff --git a/arch/x86/kvm/vmx/hyperv.c b/arch/x86/kvm/vmx/hyperv.c
index 5e239158174e..f05464db4fdc 100644
--- a/arch/x86/kvm/vmx/hyperv.c
+++ b/arch/x86/kvm/vmx/hyperv.c
@@ -506,3 +506,7 @@ int nested_enable_evmcs(struct kvm_vcpu *vcpu,
return 0;
}
+
+void vmx_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu)
+{
+}
diff --git a/arch/x86/kvm/vmx/hyperv.h b/arch/x86/kvm/vmx/hyperv.h
index 99a151af7a81..8efaffe9215b 100644
--- a/arch/x86/kvm/vmx/hyperv.h
+++ b/arch/x86/kvm/vmx/hyperv.h
@@ -243,5 +243,6 @@ int nested_enable_evmcs(struct kvm_vcpu *vcpu,
uint16_t *vmcs_version);
void nested_evmcs_filter_control_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
int nested_evmcs_check_controls(struct vmcs12 *vmcs12);
+void vmx_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu);
#endif /* __KVM_X86_VMX_HYPERV_H */
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 7a4260416d88..a89b8e6f90f3 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -6996,4 +6996,5 @@ struct kvm_x86_nested_ops vmx_nested_ops = {
.write_log_dirty = nested_vmx_write_pml_buffer,
.enable_evmcs = nested_enable_evmcs,
.get_evmcs_version = nested_get_evmcs_version,
+ .hv_inject_synthetic_vmexit_post_tlb_flush = vmx_hv_inject_synthetic_vmexit_post_tlb_flush,
};
--
2.37.3
next prev parent reply other threads:[~2022-11-01 14:57 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-01 14:53 [PATCH v13 00/48] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush features Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 01/48] x86/hyperv: Move VMCB enlightenment definitions to hyperv-tlfs.h Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 02/48] KVM: selftests: Move "struct hv_enlightenments" to x86_64/svm.h Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 03/48] KVM: SVM: Add a proper field for Hyper-V VMCB enlightenments Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 04/48] x86/hyperv: KVM: Rename "hv_enlightenments" to "hv_vmcb_enlightenments" Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 05/48] KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush' Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 06/48] KVM: VMX: Rename "vmx/evmcs.{ch}" to "vmx/hyperv.{ch}" Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 07/48] KVM: x86: Move clearing of TLB_FLUSH_CURRENT to kvm_vcpu_flush_tlb_all() Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 08/48] KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flag Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 09/48] KVM: x86: hyper-v: Introduce TLB flush fifo Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 10/48] KVM: x86: hyper-v: Add helper to read hypercall data for array Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 11/48] KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 12/48] KVM: x86: hyper-v: Expose support for extended gva ranges for flush hypercalls Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 13/48] KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 14/48] x86/hyperv: Introduce HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK constants Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 15/48] KVM: x86: hyper-v: Use HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK instead of raw '64' Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 16/48] KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in kvm_hv_send_ipi() Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 17/48] KVM: x86: hyper-v: Create a separate fifo for L2 TLB flush Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 18/48] KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead of on-stack 'sparse_banks' Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 19/48] KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in use Vitaly Kuznetsov
2022-11-01 14:53 ` [PATCH v13 20/48] KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_id Vitaly Kuznetsov
2022-11-01 14:53 ` Vitaly Kuznetsov [this message]
2022-11-01 14:54 ` [PATCH v13 22/48] KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall() Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 23/48] KVM: x86: hyper-v: L2 TLB flush Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 24/48] KVM: x86: hyper-v: Introduce fast guest_hv_cpuid_has_l2_tlb_flush() check Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 25/48] KVM: nVMX: hyper-v: Cache VP assist page in 'struct kvm_vcpu_hv' Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 26/48] KVM: nVMX: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 27/48] KVM: x86: Make kvm_hv_get_assist_page() return 0/-errno Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 28/48] KVM: nSVM: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 29/48] KVM: x86: Expose Hyper-V L2 TLB flush feature Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 30/48] KVM: selftests: Better XMM read/write helpers Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 31/48] KVM: selftests: Move HYPERV_LINUX_OS_ID definition to a common header Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 32/48] KVM: selftests: Move the function doing Hyper-V hypercall " Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 33/48] KVM: selftests: Hyper-V PV IPI selftest Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 34/48] KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 35/48] KVM: selftests: Export vm_vaddr_unused_gap() to make it possible to request unmapped ranges Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 36/48] KVM: selftests: Drop helpers to read/write page table entries Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 37/48] KVM: selftests: Hyper-V PV TLB flush selftest Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 38/48] KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 39/48] KVM: selftests: Sync 'struct hv_vp_assist_page' " Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 40/48] KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.h Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 41/48] KVM: selftests: Split off load_evmcs() from load_vmcs() Vitaly Kuznetsov
2022-11-01 16:13 ` Sean Christopherson
2022-11-01 14:54 ` [PATCH v13 42/48] KVM: selftests: Create a vendor independent helper to allocate Hyper-V specific test pages Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 43/48] KVM: selftests: Allocate Hyper-V partition assist page Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 44/48] KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall() Vitaly Kuznetsov
2022-11-01 15:21 ` Sean Christopherson
2022-11-01 14:54 ` [PATCH v13 45/48] KVM: selftests: Introduce rdmsr_from_l2() and use it for MSR-Bitmap tests Vitaly Kuznetsov
2022-11-01 16:11 ` Sean Christopherson
2022-11-01 16:27 ` Vitaly Kuznetsov
2022-11-01 17:26 ` Sean Christopherson
2022-11-01 14:54 ` [PATCH v13 46/48] KVM: selftests: evmcs_test: Introduce L2 TLB flush test Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 47/48] KVM: selftests: hyperv_svm_test: " Vitaly Kuznetsov
2022-11-01 14:54 ` [PATCH v13 48/48] KVM: selftests: Rename 'evmcs_test' to 'hyperv_evmcs' Vitaly Kuznetsov
2022-11-01 15:21 ` [PATCH v13 00/48] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush features Sean Christopherson
2022-11-01 16:29 ` Vitaly Kuznetsov
2022-11-18 18:16 ` Paolo Bonzini
2022-11-21 9:20 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221101145426.251680-22-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=sidcha@amazon.de \
--cc=wanpengli@tencent.com \
--cc=yuan.yao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).