From: Vibhore Vardhan <vibhore@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<rafael@kernel.org>, <viresh.kumar@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-pm@vger.kernel.org>
Subject: [PATCH RESEND 1/5] cpufreq: ti-cpufreq: Add support for AM625
Date: Tue, 1 Nov 2022 13:09:31 -0500 [thread overview]
Message-ID: <20221101180935.139268-2-vibhore@ti.com> (raw)
In-Reply-To: <20221101180935.139268-1-vibhore@ti.com>
From: Dave Gerlach <d-gerlach@ti.com>
Add support for TI K3 AM625 SoC to read speed and revision values from
hardware and pass to OPP layer.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
---
drivers/cpufreq/ti-cpufreq.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index f64180dd2005..be4209d97cb3 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -39,6 +39,14 @@
#define OMAP34xx_ProdID_SKUID 0x4830A20C
#define OMAP3_SYSCON_BASE (0x48000000 + 0x2000 + 0x270)
+#define AM625_EFUSE_K_MPU_OPP 11
+#define AM625_EFUSE_S_MPU_OPP 19
+#define AM625_EFUSE_T_MPU_OPP 20
+
+#define AM625_SUPPORT_K_MPU_OPP BIT(0)
+#define AM625_SUPPORT_S_MPU_OPP BIT(1)
+#define AM625_SUPPORT_T_MPU_OPP BIT(2)
+
#define VERSION_COUNT 2
struct ti_cpufreq_data;
@@ -104,6 +112,25 @@ static unsigned long omap3_efuse_xlate(struct ti_cpufreq_data *opp_data,
return BIT(efuse);
}
+static unsigned long am625_efuse_xlate(struct ti_cpufreq_data *opp_data,
+ unsigned long efuse)
+{
+ unsigned long calculated_efuse = AM625_SUPPORT_K_MPU_OPP;
+
+ switch (efuse) {
+ case AM625_EFUSE_T_MPU_OPP:
+ calculated_efuse |= AM625_SUPPORT_T_MPU_OPP;
+ fallthrough;
+ case AM625_EFUSE_S_MPU_OPP:
+ calculated_efuse |= AM625_SUPPORT_S_MPU_OPP;
+ fallthrough;
+ case AM625_EFUSE_K_MPU_OPP:
+ calculated_efuse |= AM625_SUPPORT_K_MPU_OPP;
+ }
+
+ return calculated_efuse;
+}
+
static struct ti_cpufreq_soc_data am3x_soc_data = {
.efuse_xlate = amx3_efuse_xlate,
.efuse_fallback = AM33XX_800M_ARM_MPU_MAX_FREQ,
@@ -198,6 +225,14 @@ static struct ti_cpufreq_soc_data am3517_soc_data = {
.multi_regulator = false,
};
+static struct ti_cpufreq_soc_data am625_soc_data = {
+ .efuse_xlate = am625_efuse_xlate,
+ .efuse_offset = 0x0018,
+ .efuse_mask = 0x07c0,
+ .efuse_shift = 0x6,
+ .rev_offset = 0x0014,
+ .multi_regulator = false,
+};
/**
* ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC
@@ -301,6 +336,7 @@ static const struct of_device_id ti_cpufreq_of_match[] = {
{ .compatible = "ti,dra7", .data = &dra7_soc_data },
{ .compatible = "ti,omap34xx", .data = &omap34xx_soc_data, },
{ .compatible = "ti,omap36xx", .data = &omap36xx_soc_data, },
+ { .compatible = "ti,am625", .data = &am625_soc_data, },
/* legacy */
{ .compatible = "ti,omap3430", .data = &omap34xx_soc_data, },
{ .compatible = "ti,omap3630", .data = &omap36xx_soc_data, },
--
2.34.1
next prev parent reply other threads:[~2022-11-01 18:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-01 18:09 [PATCH RESEND 0/5] cpufreq: ti-cpufreq: Enable AM625 CPUFreq Vibhore Vardhan
2022-11-01 18:09 ` Vibhore Vardhan [this message]
2022-11-01 18:09 ` [PATCH RESEND 2/5] cpufreq: dt-platdev: Blacklist ti,am625 SoC Vibhore Vardhan
2022-11-01 18:09 ` [PATCH RESEND 3/5] arm64: dts: ti: k3-am625: Introduce operating-points table Vibhore Vardhan
2022-11-01 18:09 ` [PATCH RESEND 4/5] cpufreq: ti: Enable ti-cpufreq for ARCH_K3 Vibhore Vardhan
2022-11-01 18:09 ` [PATCH RESEND 5/5] arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP Vibhore Vardhan
2022-11-07 10:02 ` [PATCH RESEND 0/5] cpufreq: ti-cpufreq: Enable AM625 CPUFreq Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221101180935.139268-2-vibhore@ti.com \
--to=vibhore@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nm@ti.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).