linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
To: linux-spi@vger.kernel.org, openbmc@lists.ozlabs.org
Cc: "Lee Jones" <lee@kernel.org>, "Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Jonathan Neuschäfer" <j.neuschaefer@gmx.net>,
	"Mark Brown" <broonie@kernel.org>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org
Subject: [PATCH 3/8] dt-bindings: spi: Add Nuvoton WPCM450 Flash Interface Unit (FIU)
Date: Sat,  5 Nov 2022 19:59:06 +0100	[thread overview]
Message-ID: <20221105185911.1547847-4-j.neuschaefer@gmx.net> (raw)
In-Reply-To: <20221105185911.1547847-1-j.neuschaefer@gmx.net>

The Flash Interface Unit (FIU) is the SPI flash controller in the
Nuvoton WPCM450 BMC SoC. It supports four chip selects, and direct
(memory-mapped) access to 16 MiB per chip. Larger flash chips can be
accessed by software-defined SPI transfers.

The FIU in newer NPCM7xx SoCs is not compatible with the WPCM450 FIU.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
 .../bindings/spi/nuvoton,wpcm450-fiu.yaml     | 76 +++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml

diff --git a/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml b/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml
new file mode 100644
index 0000000000000..dc0ea2184f8d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nuvoton,wpcm450-fiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 Flash Interface Unit (FIU)
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    const: nuvoton,wpcm450-fiu
+
+  reg:
+    items:
+      - description: FIU registers
+      - description: Memory-mapped flash contents
+
+  reg-names:
+    items:
+      - const: control
+      - const: memory
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,shm:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the SHM block (see ../arm/nuvoton,shm.yaml)
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/nuvoton,wpcm450-clk.h>
+    spi@c8000000 {
+      compatible = "nuvoton,wpcm450-fiu";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
+      reg-names = "control", "memory";
+      clocks = <&clk WPCM450_CLK_FIU>;
+      nuvoton,shm = <&shm>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+      };
+    };
+
+    shm: syscon@c8001000 {
+      compatible = "nuvoton,wpcm450-shm", "syscon";
+      reg = <0xc8001000 0x1000>;
+    };
+
+  - |
+    #include <dt-bindings/clock/nuvoton,wpcm450-clk.h>
+    spi@c8000000 {
+      compatible = "nuvoton,wpcm450-fiu";
+      // the "memory" resource may be omitted
+      reg = <0xc8000000 0x1000>;
+      reg-names = "control";
+    };
--
2.35.1


  parent reply	other threads:[~2022-11-05 18:59 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-05 18:59 [PATCH 0/8] Nuvoton WPCM450 FIU SPI flash controller Jonathan Neuschäfer
2022-11-05 18:59 ` [PATCH 1/8] pinctrl: nuvoton: wpcm450: Refactor MFSEL setting code Jonathan Neuschäfer
2022-11-05 18:59 ` [PATCH 2/8] pinctrl: nuvoton: wpcm450: Fix handling of inverted MFSEL bits Jonathan Neuschäfer
2022-11-05 18:59 ` Jonathan Neuschäfer [this message]
2022-11-06  9:38   ` [PATCH 3/8] dt-bindings: spi: Add Nuvoton WPCM450 Flash Interface Unit (FIU) Krzysztof Kozlowski
2022-11-06 14:45     ` Jonathan Neuschäfer
2022-11-07  8:09       ` Krzysztof Kozlowski
2022-11-07 12:12         ` Jonathan Neuschäfer
2022-11-06 13:27   ` Rob Herring
2022-11-05 18:59 ` [PATCH 4/8] dt-bindings: mfd: syscon: Add nuvoton,wpcm450-shm Jonathan Neuschäfer
2022-11-06  9:39   ` Krzysztof Kozlowski
2022-11-07  9:20   ` Lee Jones
2022-11-05 18:59 ` [PATCH 5/8] ARM: dts: wpcm450: Add FIU SPI controller node Jonathan Neuschäfer
2022-11-05 18:59 ` [PATCH 6/8] ARM: dts: wpcm450-supermicro-x9sci-ln4f: Add SPI flash Jonathan Neuschäfer
2022-11-05 18:59 ` [PATCH 7/8] spi: wpcm-fiu: Add driver for Nuvoton WPCM450 Flash Interface Unit (FIU) Jonathan Neuschäfer
2022-11-05 21:35   ` kernel test robot
2022-11-06 14:51     ` Jonathan Neuschäfer
2022-11-05 21:45   ` kernel test robot
2022-11-05 18:59 ` [PATCH 8/8] spi: wpcm-fiu: Add direct map support Jonathan Neuschäfer
2022-11-05 21:35   ` kernel test robot
2022-11-06 14:49     ` Jonathan Neuschäfer
2022-11-09  8:41 ` [PATCH 0/8] Nuvoton WPCM450 FIU SPI flash controller Linus Walleij
2022-11-09 10:08   ` Jonathan Neuschäfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221105185911.1547847-4-j.neuschaefer@gmx.net \
    --to=j.neuschaefer@gmx.net \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lee@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=openbmc@lists.ozlabs.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).