linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Lin, Meng-Bo" <linmengbo0689@protonmail.com>
To: linux-kernel@vger.kernel.org
Cc: Markuss Broks <markuss.broks@gmail.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Henrik Rydberg <rydberg@bitmath.org>,
	Stephan Gerhold <stephan@gerhold.net>,
	Nikita Travkin <nikita@trvn.ru>,
	linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht
Subject: [PATCH v2 3/3] input/touchscreen: imagis: Add supports for Imagis IST3038
Date: Fri, 18 Nov 2022 18:21:49 +0000	[thread overview]
Message-ID: <20221118182103.3405-4-linmengbo0689@protonmail.com> (raw)
In-Reply-To: <20221118182103.3405-1-linmengbo0689@protonmail.com>

From: Markuss Broks <markuss.broks@gmail.com>

Imagis IST3038 is another variant of Imagis IST3038 IC, which has
a different register interface from IST3038C (possibly firmware defined).

This should also work for IST3044B (though untested), however other
variants using this interface/protocol(IST3026, IST3032, IST3026B,
IST3032B) have a different format for coordinates, and they'd need
additional effort to be supported by this driver.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
[Use IST3038C_REG_CHIPID_BASE]
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
---
 drivers/input/touchscreen/imagis.c | 62 ++++++++++++++++++++++++------
 1 file changed, 51 insertions(+), 11 deletions(-)

diff --git a/drivers/input/touchscreen/imagis.c b/drivers/input/touchscreen/imagis.c
index b667914a44f1..eb3b0684817f 100644
--- a/drivers/input/touchscreen/imagis.c
+++ b/drivers/input/touchscreen/imagis.c
@@ -13,7 +13,8 @@
 
 #define IST3038C_HIB_ACCESS		(0x800B << 16)
 #define IST3038C_DIRECT_ACCESS		BIT(31)
-#define IST3038C_REG_CHIPID		0x40001000
+#define IST3038C_REG_CHIPID_BASE	0x40001000
+#define IST3038C_REG_CHIPID(base)	(base | IST3038C_DIRECT_ACCESS)
 #define IST3038C_REG_HIB_BASE		0x30000100
 #define IST3038C_REG_TOUCH_STATUS	(IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS)
 #define IST3038C_REG_TOUCH_COORD	(IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS | 0x8)
@@ -31,8 +32,24 @@
 #define IST3038C_FINGER_COUNT_SHIFT	12
 #define IST3038C_FINGER_STATUS_MASK	GENMASK(9, 0)
 
+#define IST30XX_REG_STATUS		0x20
+#define IST30XXB_REG_CHIPID_BASE	0x40000000
+#define IST30XX_WHOAMI			0x30003000
+#define IST30XXA_WHOAMI			0x300a300a
+#define IST30XXB_WHOAMI			0x300b300b
+#define IST3038_WHOAMI			0x30383038
+
+struct imagis_properties {
+	unsigned int interrupt_msg_cmd;
+	unsigned int touch_coord_cmd;
+	unsigned int chipid_base;
+	unsigned int whoami_val;
+	bool protocol_b;
+};
+
 struct imagis_ts {
 	struct i2c_client *client;
+	const struct imagis_properties *tdata;
 	struct input_dev *input_dev;
 	struct touchscreen_properties prop;
 	struct regulator_bulk_data supplies[2];
@@ -84,8 +101,7 @@ static irqreturn_t imagis_interrupt(int irq, void *dev_id)
 	int i;
 	int error;
 
-	error = imagis_i2c_read_reg(ts, IST3038C_REG_INTR_MESSAGE,
-				    &intr_message);
+	error = imagis_i2c_read_reg(ts, ts->tdata->interrupt_msg_cmd, &intr_message);
 	if (error) {
 		dev_err(&ts->client->dev,
 			"failed to read the interrupt message: %d\n", error);
@@ -104,9 +120,13 @@ static irqreturn_t imagis_interrupt(int irq, void *dev_id)
 	finger_pressed = intr_message & IST3038C_FINGER_STATUS_MASK;
 
 	for (i = 0; i < finger_count; i++) {
-		error = imagis_i2c_read_reg(ts,
-					    IST3038C_REG_TOUCH_COORD + (i * 4),
-					    &finger_status);
+		if (ts->tdata->protocol_b)
+			error = imagis_i2c_read_reg(ts,
+						    ts->tdata->touch_coord_cmd, &finger_status);
+		else
+			error = imagis_i2c_read_reg(ts,
+						    ts->tdata->touch_coord_cmd + (i * 4),
+						    &finger_status);
 		if (error) {
 			dev_err(&ts->client->dev,
 				"failed to read coordinates for finger %d: %d\n",
@@ -261,6 +281,12 @@ static int imagis_probe(struct i2c_client *i2c)
 
 	ts->client = i2c;
 
+	ts->tdata = device_get_match_data(dev);
+	if (!ts->tdata) {
+		dev_err(dev, "missing chip data\n");
+		return -EINVAL;
+	}
+
 	error = imagis_init_regulators(ts);
 	if (error) {
 		dev_err(dev, "regulator init error: %d\n", error);
@@ -279,15 +305,13 @@ static int imagis_probe(struct i2c_client *i2c)
 		return error;
 	}
 
-	error = imagis_i2c_read_reg(ts,
-			IST3038C_REG_CHIPID | IST3038C_DIRECT_ACCESS,
-			&chip_id);
+	error = imagis_i2c_read_reg(ts, IST3038C_REG_CHIPID(ts->tdata->chipid_base), &chip_id);
 	if (error) {
 		dev_err(dev, "chip ID read failure: %d\n", error);
 		return error;
 	}
 
-	if (chip_id != IST3038C_WHOAMI) {
+	if (chip_id != ts->tdata->whoami_val) {
 		dev_err(dev, "unknown chip ID: 0x%x\n", chip_id);
 		return -EINVAL;
 	}
@@ -343,9 +367,25 @@ static int __maybe_unused imagis_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(imagis_pm_ops, imagis_suspend, imagis_resume);
 
+static const struct imagis_properties imagis_3038_data = {
+	.interrupt_msg_cmd = IST30XX_REG_STATUS,
+	.touch_coord_cmd = IST30XX_REG_STATUS,
+	.chipid_base = IST30XXB_REG_CHIPID_BASE,
+	.whoami_val = IST3038_WHOAMI,
+	.protocol_b = true,
+};
+
+static const struct imagis_properties imagis_3038c_data = {
+	.interrupt_msg_cmd = IST3038C_REG_INTR_MESSAGE,
+	.touch_coord_cmd = IST3038C_REG_TOUCH_COORD,
+	.chipid_base = IST3038C_REG_CHIPID_BASE,
+	.whoami_val = IST3038C_WHOAMI,
+};
+
 #ifdef CONFIG_OF
 static const struct of_device_id imagis_of_match[] = {
-	{ .compatible = "imagis,ist3038c", },
+	{ .compatible = "imagis,ist3038", .data = &imagis_3038_data },
+	{ .compatible = "imagis,ist3038c", .data = &imagis_3038c_data },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, imagis_of_match);
-- 
2.30.2



  parent reply	other threads:[~2022-11-18 18:22 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-18 18:21 [PATCH v2 0/3] Add support for Imagis IST3038 Lin, Meng-Bo
2022-11-18 18:21 ` [PATCH v2 1/3] dt-bindings: input/touchscreen: Add compatible for IST3038 Lin, Meng-Bo
2022-11-20 10:53   ` Krzysztof Kozlowski
2022-11-30 15:35   ` Mattijs Korpershoek
2022-11-18 18:21 ` [PATCH v2 2/3] input/touchscreen: imagis: Correct the maximum touch area value Lin, Meng-Bo
2022-11-30 15:34   ` Mattijs Korpershoek
2022-11-18 18:21 ` Lin, Meng-Bo [this message]
2022-11-30 15:43   ` [PATCH v2 3/3] input/touchscreen: imagis: Add supports for Imagis IST3038 Mattijs Korpershoek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221118182103.3405-4-linmengbo0689@protonmail.com \
    --to=linmengbo0689@protonmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=markuss.broks@gmail.com \
    --cc=nikita@trvn.ru \
    --cc=robh+dt@kernel.org \
    --cc=rydberg@bitmath.org \
    --cc=stephan@gerhold.net \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).