linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: AngeloGioacchino Del Regno  <angelogioacchino.delregno@collabora.com>
To: tglx@linutronix.de
Cc: maz@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, matthias.bgg@gmail.com,
	youlin.pei@mediatek.com, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>
Subject: [PATCH v3 3/4] irqchip: irq-mtk-cirq: Move register offsets to const array
Date: Mon, 28 Nov 2022 10:22:16 +0100	[thread overview]
Message-ID: <20221128092217.36552-4-angelogioacchino.delregno@collabora.com> (raw)
In-Reply-To: <20221128092217.36552-1-angelogioacchino.delregno@collabora.com>

In preparation to add support for new SoCs having a different
register layout, add an enumeration that documents register
offsets and move the definitions for the same to a u32 array;

Selecting the right register offsets array is done by adding an
of_device_id array containing all of the currently supported
compatible strings pointing to the "v1" offsets array (as data):
since no devicetree declares the `mediatek,mtk-cirq` compatible
without a SoC-specific one, it wasn't necessary to provide any
legacy fallback.

Every usage of the aforemementioned definitions was changed to
get a register address through a newly introduced `mtk_cirq_reg()`
accessor.

This change brings no functional changes.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/irqchip/irq-mtk-cirq.c | 82 +++++++++++++++++++++++++++-------
 1 file changed, 65 insertions(+), 17 deletions(-)

diff --git a/drivers/irqchip/irq-mtk-cirq.c b/drivers/irqchip/irq-mtk-cirq.c
index 9bca0918078e..4776ed6492fb 100644
--- a/drivers/irqchip/irq-mtk-cirq.c
+++ b/drivers/irqchip/irq-mtk-cirq.c
@@ -15,14 +15,29 @@
 #include <linux/slab.h>
 #include <linux/syscore_ops.h>
 
-#define CIRQ_ACK	0x40
-#define CIRQ_MASK_SET	0xc0
-#define CIRQ_MASK_CLR	0x100
-#define CIRQ_SENS_SET	0x180
-#define CIRQ_SENS_CLR	0x1c0
-#define CIRQ_POL_SET	0x240
-#define CIRQ_POL_CLR	0x280
-#define CIRQ_CONTROL	0x300
+enum mtk_cirq_regoffs_index {
+	CIRQ_STA,
+	CIRQ_ACK,
+	CIRQ_MASK_SET,
+	CIRQ_MASK_CLR,
+	CIRQ_SENS_SET,
+	CIRQ_SENS_CLR,
+	CIRQ_POL_SET,
+	CIRQ_POL_CLR,
+	CIRQ_CONTROL
+};
+
+static const u32 mtk_cirq_regoffs_v1[] = {
+	[CIRQ_STA]	= 0x0,
+	[CIRQ_ACK]	= 0x40,
+	[CIRQ_MASK_SET]	= 0xc0,
+	[CIRQ_MASK_CLR]	= 0x100,
+	[CIRQ_SENS_SET]	= 0x180,
+	[CIRQ_SENS_CLR]	= 0x1c0,
+	[CIRQ_POL_SET]	= 0x240,
+	[CIRQ_POL_CLR]	= 0x280,
+	[CIRQ_CONTROL]	= 0x300,
+};
 
 #define CIRQ_EN	0x1
 #define CIRQ_EDGE	0x2
@@ -32,18 +47,32 @@ struct mtk_cirq_chip_data {
 	void __iomem *base;
 	unsigned int ext_irq_start;
 	unsigned int ext_irq_end;
+	const u32 *offsets;
 	struct irq_domain *domain;
 };
 
 static struct mtk_cirq_chip_data *cirq_data;
 
-static void mtk_cirq_write_mask(struct irq_data *data, unsigned int offset)
+static void __iomem *mtk_cirq_reg(struct mtk_cirq_chip_data *chip_data,
+				  enum mtk_cirq_regoffs_index idx)
+{
+	return chip_data->base + chip_data->offsets[idx];
+}
+
+static void __iomem *mtk_cirq_irq_reg(struct mtk_cirq_chip_data *chip_data,
+				      enum mtk_cirq_regoffs_index idx,
+				      unsigned int cirq_num)
+{
+	return mtk_cirq_reg(chip_data, idx) + (cirq_num / 32) * 4;
+}
+
+static void mtk_cirq_write_mask(struct irq_data *data, enum mtk_cirq_regoffs_index idx)
 {
 	struct mtk_cirq_chip_data *chip_data = data->chip_data;
 	unsigned int cirq_num = data->hwirq;
 	u32 mask = 1 << (cirq_num % 32);
 
-	writel_relaxed(mask, chip_data->base + offset + (cirq_num / 32) * 4);
+	writel_relaxed(mask, mtk_cirq_irq_reg(chip_data, idx, cirq_num));
 }
 
 static void mtk_cirq_mask(struct irq_data *data)
@@ -160,6 +189,7 @@ static const struct irq_domain_ops cirq_domain_ops = {
 #ifdef CONFIG_PM_SLEEP
 static int mtk_cirq_suspend(void)
 {
+	void __iomem *reg;
 	u32 value, mask;
 	unsigned int irq, hwirq_num;
 	bool pending, masked;
@@ -200,31 +230,34 @@ static int mtk_cirq_suspend(void)
 				continue;
 		}
 
+		reg = mtk_cirq_irq_reg(cirq_data, CIRQ_ACK, i);
 		mask = 1 << (i % 32);
-		writel_relaxed(mask, cirq_data->base + CIRQ_ACK + (i / 32) * 4);
+		writel_relaxed(mask, reg);
 	}
 
 	/* set edge_only mode, record edge-triggerd interrupts */
 	/* enable cirq */
-	value = readl_relaxed(cirq_data->base + CIRQ_CONTROL);
+	reg = mtk_cirq_reg(cirq_data, CIRQ_CONTROL);
+	value = readl_relaxed(reg);
 	value |= (CIRQ_EDGE | CIRQ_EN);
-	writel_relaxed(value, cirq_data->base + CIRQ_CONTROL);
+	writel_relaxed(value, reg);
 
 	return 0;
 }
 
 static void mtk_cirq_resume(void)
 {
+	void __iomem *reg = mtk_cirq_reg(cirq_data, CIRQ_CONTROL);
 	u32 value;
 
 	/* flush recorded interrupts, will send signals to parent controller */
-	value = readl_relaxed(cirq_data->base + CIRQ_CONTROL);
-	writel_relaxed(value | CIRQ_FLUSH, cirq_data->base + CIRQ_CONTROL);
+	value = readl_relaxed(reg);
+	writel_relaxed(value | CIRQ_FLUSH, reg);
 
 	/* disable cirq */
-	value = readl_relaxed(cirq_data->base + CIRQ_CONTROL);
+	value = readl_relaxed(reg);
 	value &= ~(CIRQ_EDGE | CIRQ_EN);
-	writel_relaxed(value, cirq_data->base + CIRQ_CONTROL);
+	writel_relaxed(value, reg);
 }
 
 static struct syscore_ops mtk_cirq_syscore_ops = {
@@ -240,10 +273,18 @@ static void mtk_cirq_syscore_init(void)
 static inline void mtk_cirq_syscore_init(void) {}
 #endif
 
+static const struct of_device_id mtk_cirq_of_match[] = {
+	{ .compatible = "mediatek,mt2701-cirq", .data = &mtk_cirq_regoffs_v1 },
+	{ .compatible = "mediatek,mt8135-cirq", .data = &mtk_cirq_regoffs_v1 },
+	{ .compatible = "mediatek,mt8173-cirq", .data = &mtk_cirq_regoffs_v1 },
+	{ /* sentinel */ }
+};
+
 static int __init mtk_cirq_of_init(struct device_node *node,
 				   struct device_node *parent)
 {
 	struct irq_domain *domain, *domain_parent;
+	const struct of_device_id *match;
 	unsigned int irq_num;
 	int ret;
 
@@ -274,6 +315,13 @@ static int __init mtk_cirq_of_init(struct device_node *node,
 	if (ret)
 		goto out_unmap;
 
+	match = of_match_node(mtk_cirq_of_match, node);
+	if (!match) {
+		ret = -ENODEV;
+		goto out_unmap;
+	}
+	cirq_data->offsets = match->data;
+
 	irq_num = cirq_data->ext_irq_end - cirq_data->ext_irq_start + 1;
 	domain = irq_domain_add_hierarchy(domain_parent, 0,
 					  irq_num, node,
-- 
2.38.1


  parent reply	other threads:[~2022-11-28  9:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-28  9:22 [PATCH v3 0/4] MediaTek CIRQ: new register layout and schema AngeloGioacchino Del Regno
2022-11-28  9:22 ` [PATCH v3 1/4] dt-bindings: interrupt-controller: mediatek,cirq: Migrate to dt schema AngeloGioacchino Del Regno
2022-11-28 11:53   ` [irqchip: irq/irqchip-next] " irqchip-bot for AngeloGioacchino Del Regno
2022-11-29 16:24   ` [PATCH v3 1/4] " Alexandre Mergnat
2022-11-28  9:22 ` [PATCH v3 2/4] dt-bindings: interrupt-controller: mediatek,cirq: Document MT8192 AngeloGioacchino Del Regno
2022-11-28 11:53   ` [irqchip: irq/irqchip-next] " irqchip-bot for AngeloGioacchino Del Regno
2022-11-28  9:22 ` AngeloGioacchino Del Regno [this message]
2022-11-28 11:53   ` [irqchip: irq/irqchip-next] irqchip/irq-mtk-cirq: Move register offsets to const array irqchip-bot for AngeloGioacchino Del Regno
2022-11-28  9:22 ` [PATCH v3 4/4] irqchip: irq-mtk-cirq: Add support for System CIRQ on MT8192 AngeloGioacchino Del Regno
2022-11-28 11:53   ` [irqchip: irq/irqchip-next] irqchip/irq-mtk-cirq: " irqchip-bot for AngeloGioacchino Del Regno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221128092217.36552-4-angelogioacchino.delregno@collabora.com \
    --to=angelogioacchino.delregno@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=maz@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=youlin.pei@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).