[PATCH v1 02/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: fix port validation and VID information

[Oleksij Rempel <o.rempel@pengutronix.de>]

The ksz8_fdb_dump() has multiple issues:
- struct alu_struct was used only to store MAC address.
- port value was misinterpreted as a bit mask
- Filter ID was attempted to use as VID. FID can be used to get VID, but
  currently it is not supported.
- by the attempt to use FID, was used not initialized alu.fid...

Before this patch, "bridge fdb" command was providing random results,
which are fixed by this patch:
- random vid information
- assignment to wrong port

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8795.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 003b0ac2854c..e0530bc3bec0 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -958,15 +958,14 @@ int ksz8_fdb_dump(struct ksz_device *dev, int port,
 	u16 entries = 0;
 	u8 timestamp = 0;
 	u8 fid;
-	u8 member;
-	struct alu_struct alu;
+	u8 src_port;
+	u8 mac[ETH_ALEN];
 
 	do {
-		alu.is_static = false;
-		ret = ksz8_r_dyn_mac_table(dev, i, alu.mac, &fid, &member,
+		ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port,
 					   &timestamp, &entries);
-		if (!ret && (member & BIT(port))) {
-			ret = cb(alu.mac, alu.fid, alu.is_static, data);
+		if (!ret && port == src_port) {
+			ret = cb(mac, 0, false, data);
 			if (ret)
 				break;
 		}
-- 
2.30.2