linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hector Martin <marcan@marcan.st>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: Hector Martin <marcan@marcan.st>, Sven Peter <sven@svenpeter.dev>,
	Alyssa Rosenzweig <alyssa@rosenzweig.io>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Stephen Boyd <sboyd@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Marc Zyngier <maz@kernel.org>,
	Mark Kettenis <mark.kettenis@xs4all.nl>,
	asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 4/4] arm64: dts: apple: Add CPU topology & cpufreq nodes for t8103
Date: Mon, 28 Nov 2022 21:42:16 +0900	[thread overview]
Message-ID: <20221128124216.13477-5-marcan@marcan.st> (raw)
In-Reply-To: <20221128124216.13477-1-marcan@marcan.st>

Add the missing CPU topology/capacity information and the cpufreq nodes,
so we can have CPU frequency scaling and the scheduler has the
information it needs to make the correct decisions.

Boost states are commented out, as they are not yet available (that
requires CPU deep sleep support, to be eventually done via PSCI).
The driver supports them fine; the hardware will just refuse to ever
go into them at this time, so don't expose them to users until that's
done.

Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
---
 arch/arm64/boot/dts/apple/t8103.dtsi | 204 +++++++++++++++++++++++++--
 1 file changed, 194 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 51a63b29d404..d56708038d05 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -22,71 +22,243 @@ cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		cpu0: cpu@0 {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+				core2 {
+					cpu = <&cpu_p2>;
+				};
+				core3 {
+					cpu = <&cpu_p3>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
 		};
 
-		cpu1: cpu@1 {
+		cpu_e1: cpu@1 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
 		};
 
-		cpu2: cpu@2 {
+		cpu_e2: cpu@2 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
 		};
 
-		cpu3: cpu@3 {
+		cpu_e3: cpu@3 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
 		};
 
-		cpu4: cpu@10100 {
+		cpu_p0: cpu@10100 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10100>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
 		};
 
-		cpu5: cpu@10101 {
+		cpu_p1: cpu@10101 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10101>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
 		};
 
-		cpu6: cpu@10102 {
+		cpu_p2: cpu@10102 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10102>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
 		};
 
-		cpu7: cpu@10103 {
+		cpu_p3: cpu@10103 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10103>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
 		};
 	};
 
+	ecluster_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <2>;
+			clock-latency-ns = <22000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <3>;
+			clock-latency-ns = <27000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <4>;
+			clock-latency-ns = <33000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <5>;
+			clock-latency-ns = <50000>;
+		};
+	};
+
+	pcluster_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <8000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <828000000>;
+			opp-level = <2>;
+			clock-latency-ns = <19000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <3>;
+			clock-latency-ns = <21000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <4>;
+			clock-latency-ns = <23000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-level = <5>;
+			clock-latency-ns = <24000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-level = <6>;
+			clock-latency-ns = <29000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1956000000>;
+			opp-level = <7>;
+			clock-latency-ns = <31000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2184000000>;
+			opp-level = <8>;
+			clock-latency-ns = <34000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2388000000>;
+			opp-level = <9>;
+			clock-latency-ns = <36000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2592000000>;
+			opp-level = <10>;
+			clock-latency-ns = <51000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2772000000>;
+			opp-level = <11>;
+			clock-latency-ns = <54000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <2988000000>;
+			opp-level = <12>;
+			clock-latency-ns = <55000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp13 {
+			opp-hz = /bits/ 64 <3096000000>;
+			opp-level = <13>;
+			clock-latency-ns = <55000>;
+			turbo-mode;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3144000000>;
+			opp-level = <14>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3204000000>;
+			opp-level = <15>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+#endif
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&aic>;
@@ -124,6 +296,18 @@ soc {
 		ranges;
 		nonposted-mmio;
 
+		cpufreq_e: performance-controller@210e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x10e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: performance-controller@211e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x11e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
 		i2c0: i2c@235010000 {
 			compatible = "apple,t8103-i2c", "apple,i2c";
 			reg = <0x2 0x35010000 0x0 0x4000>;
@@ -229,12 +413,12 @@ aic: interrupt-controller@23b100000 {
 			affinities {
 				e-core-pmu-affinity {
 					apple,fiq-index = <AIC_CPU_PMU_E>;
-					cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+					cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>;
 				};
 
 				p-core-pmu-affinity {
 					apple,fiq-index = <AIC_CPU_PMU_P>;
-					cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+					cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>;
 				};
 			};
 		};
-- 
2.35.1


      parent reply	other threads:[~2022-11-28 12:43 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-28 12:42 [PATCH v4 0/4] Apple SoC cpufreq driver Hector Martin
2022-11-28 12:42 ` [PATCH v4 1/4] MAINTAINERS: Add entries for " Hector Martin
2022-11-28 12:42 ` [PATCH v4 2/4] dt-bindings: cpufreq: apple,soc-cpufreq: Add binding for Apple SoC cpufreq Hector Martin
2022-11-28 12:56   ` Krzysztof Kozlowski
2022-11-28 13:14     ` Hector Martin
2022-11-28 14:15   ` Rob Herring
2022-11-28 12:42 ` [PATCH v4 3/4] cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states Hector Martin
2022-11-28 12:42 ` Hector Martin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221128124216.13477-5-marcan@marcan.st \
    --to=marcan@marcan.st \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.kettenis@xs4all.nl \
    --cc=matthias.bgg@gmail.com \
    --cc=maz@kernel.org \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sven@svenpeter.dev \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).