linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Li Nan <linan122@huawei.com>
To: <tj@kernel.org>, <josef@toxicpanda.com>, <axboe@kernel.dk>
Cc: <cgroups@vger.kernel.org>, <linux-block@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linan122@huawei.com>,
	<yukuai3@huawei.com>, <yi.zhang@huawei.com>
Subject: [PATCH -next 7/8] blk-iocost: fix possible UAF in ioc_pd_free
Date: Mon, 28 Nov 2022 23:44:33 +0800	[thread overview]
Message-ID: <20221128154434.4177442-8-linan122@huawei.com> (raw)
In-Reply-To: <20221128154434.4177442-1-linan122@huawei.com>

Our test found the following problem in kernel 5.10, and the same problem
should exist in mainline:

  BUG: KASAN: use-after-free in _raw_spin_lock_irqsave+0x71/0xe0
  Write of size 4 at addr ffff8881432000e0 by task swapper/4/0
  ...
  Call Trace:
   <IRQ>
   dump_stack+0x9c/0xd3
   print_address_description.constprop.0+0x19/0x170
   __kasan_report.cold+0x6c/0x84
   kasan_report+0x3a/0x50
   check_memory_region+0xfd/0x1f0
   _raw_spin_lock_irqsave+0x71/0xe0
   ioc_pd_free+0x9d/0x250
   blkg_free.part.0+0x80/0x100
   __blkg_release+0xf3/0x1c0
   rcu_do_batch+0x292/0x700
   rcu_core+0x270/0x2d0
   __do_softirq+0xfd/0x402
    </IRQ>
   asm_call_irq_on_stack+0x12/0x20
   do_softirq_own_stack+0x37/0x50
   irq_exit_rcu+0x134/0x1a0
   sysvec_apic_timer_interrupt+0x36/0x80
   asm_sysvec_apic_timer_interrupt+0x12/0x20

   Freed by task 57:
   kfree+0xba/0x680
   rq_qos_exit+0x5a/0x80
   blk_cleanup_queue+0xce/0x1a0
   virtblk_remove+0x77/0x130 [virtio_blk]
   virtio_dev_remove+0x56/0xe0
   __device_release_driver+0x2ba/0x450
   device_release_driver+0x29/0x40
   bus_remove_device+0x1d8/0x2c0
   device_del+0x333/0x7e0
   device_unregister+0x27/0x90
   unregister_virtio_device+0x22/0x40
   virtio_pci_remove+0x53/0xb0
   pci_device_remove+0x7a/0x130
   __device_release_driver+0x2ba/0x450
   device_release_driver+0x29/0x40
   pci_stop_bus_device+0xcf/0x100
   pci_stop_and_remove_bus_device+0x16/0x20
   disable_slot+0xa1/0x110
   acpiphp_disable_and_eject_slot+0x35/0xe0
   hotplug_event+0x1b8/0x3c0
   acpiphp_hotplug_notify+0x37/0x70
   acpi_device_hotplug+0xee/0x320
   acpi_hotplug_work_fn+0x69/0x80
   process_one_work+0x3c5/0x730
   worker_thread+0x93/0x650
   kthread+0x1ba/0x210
   ret_from_fork+0x22/0x30

It happened as follow:

	T1		    T2			T3
  //rmdir cgroup
  blkcg_destroy_blkgs
   blkg_destroy
    percpu_ref_kill
     blkg_release
      call_rcu
			//delete device
			del_gendisk
			 rq_qos_exit
			  ioc_rqos_exit
			   kfree(ioc)
					   __blkg_release
					    blkg_free
					     blkg_free_workfn
					      pd_free_fn
					       ioc_pd_free
						spin_lock_irqsave
						 ->ioc is freed

Fix the problem by moving the operation on ioc in ioc_pd_free() to
ioc_pd_offline(), and just free resource in ioc_pd_free() like iolatency
and throttle.

Signed-off-by: Li Nan <linan122@huawei.com>
---
 block/blk-iocost.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/block/blk-iocost.c b/block/blk-iocost.c
index 03977385449f..1b855babfc35 100644
--- a/block/blk-iocost.c
+++ b/block/blk-iocost.c
@@ -2978,7 +2978,7 @@ static void ioc_pd_init(struct blkg_policy_data *pd)
 	spin_unlock_irqrestore(&ioc->lock, flags);
 }
 
-static void ioc_pd_free(struct blkg_policy_data *pd)
+static void ioc_pd_offline(struct blkg_policy_data *pd)
 {
 	struct ioc_gq *iocg = pd_to_iocg(pd);
 	struct ioc *ioc = iocg->ioc;
@@ -3002,6 +3002,12 @@ static void ioc_pd_free(struct blkg_policy_data *pd)
 
 		hrtimer_cancel(&iocg->waitq_timer);
 	}
+}
+
+static void ioc_pd_free(struct blkg_policy_data *pd)
+{
+	struct ioc_gq *iocg = pd_to_iocg(pd);
+
 	free_percpu(iocg->pcpu_stat);
 	kfree(iocg);
 }
@@ -3488,6 +3494,7 @@ static struct blkcg_policy blkcg_policy_iocost = {
 	.cpd_free_fn	= ioc_cpd_free,
 	.pd_alloc_fn	= ioc_pd_alloc,
 	.pd_init_fn	= ioc_pd_init,
+	.pd_offline_fn	= ioc_pd_offline,
 	.pd_free_fn	= ioc_pd_free,
 	.pd_stat_fn	= ioc_pd_stat,
 };
-- 
2.31.1


  parent reply	other threads:[~2022-11-28 15:23 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-28 15:44 [PATCH -next 0/8] iocost bugfix Li Nan
2022-11-28 15:44 ` [PATCH -next 1/8] blk-iocost: cleanup ioc_qos_write() and ioc_cost_model_write() Li Nan
2022-11-28 15:44 ` [PATCH -next 2/8] blk-iocost: improve hanlder of match_u64() Li Nan
2022-11-28 15:44 ` [PATCH -next 3/8] blk-iocost: don't allow to configure bio based device Li Nan
2022-11-28 15:44 ` [PATCH -next 4/8] blk-iocost: read params inside lock in sysfs apis Li Nan
2022-11-28 15:44 ` [PATCH -next 5/8] blk-iocost: fix divide by 0 error in calc_lcoefs() Li Nan
2022-11-28 15:44 ` [PATCH -next 6/8] blk-iocost: change div64_u64 to DIV64_U64_ROUND_UP in ioc_refresh_params() Li Nan
2022-11-28 15:44 ` Li Nan [this message]
2022-11-29 12:18   ` [PATCH -next 7/8] blk-iocost: fix possible UAF in ioc_pd_free Yu Kuai
2022-11-28 15:44 ` [PATCH -next 8/8] block: fix null-pointer dereference in ioc_pd_init Li Nan
2022-11-29 11:23   ` kernel test robot
2022-11-29 14:25   ` Christoph Hellwig
2022-11-30  1:32     ` Yu Kuai
2022-11-30 15:59       ` Christoph Hellwig
2022-11-30  0:50   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221128154434.4177442-8-linan122@huawei.com \
    --to=linan122@huawei.com \
    --cc=axboe@kernel.dk \
    --cc=cgroups@vger.kernel.org \
    --cc=josef@toxicpanda.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tj@kernel.org \
    --cc=yi.zhang@huawei.com \
    --cc=yukuai3@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).